Omega Owners Forum - Print Page

Omega Owners Forum
https://oldsite.omegaowners.com/forum/YaBB.pl Omega Help >> Omega General Help >> Tyre to strut contact??? https://oldsite.omegaowners.com/forum/YaBB.pl?num=1315654693 Message started by HockeyDave55 on 10. Sep 2011 at 12:38

Title: Tyre to strut contact???
Post by HockeyDave55 on 10. Sep 2011 at 12:38

Hi,
I got a set of MV6? Wheel for my MV6 from you know where... With 235/45 R 17 tyres.....

The problem is that while I'm under the car doing my clutch, I noticed a nice shiny band round the side wall of my front tyres.

So, just in case I don't have wheels from another model (assuming they are different) what should it measure from hub face to inner most point on the rim?

Fixing shouldn't cause too much problem but a problem it is... :(

Title: Re: Tyre to strut contact???
Post by Agemo on 10. Sep 2011 at 12:43

If you have genuine MV6 rims, then your camber is out, or you just need spacers.

Title: Re: Tyre to strut contact???
Post by HockeyDave55 on 10. Sep 2011 at 12:53

Agemo wrote on 10. Sep 2011 at 12:43:

If you have genuine MV6 rims, then your camber is out, or you just need spacers.

I think they are GM, what should the ID be?
When she's back on the road, I'll get the geo checked.
BTW, Thanks....