19. Apr 2026 at 09:18

	Welcome, Guest. Please Login

Shop

Help

Members

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

Omega Owners Forum › Chat › General Discussion Area › Calliper Hole Spacing.

(Moderators: Marks DTM Calib, TheBoy, Auto Addict, Darth Loo-knee, hotel21)

‹ Previous Topic | Next Topic ›

Pages: 1

Calliper Hole Spacing. (Read 572 times)

Davey

Junior Member

Offline

Posts: 111
Berkshire
Gender: male

Calliper Hole Spacing.
03. Aug 2006 at 08:54

I was looking round a friend of the families lockup last night and came across a brand new set of Mercedes 4 pots and 330mm discs, the PCD for the merc is almost the same as the omega (5x112), just wondering if anyone knows the bolt hole spacing on the calliper mounting brackets i.e. the distance between the centre of the two holes, I don't have an omega calliper to hand so can not compare. However the merc item has 100mm spacing.

Cheers!

IP Logged

Marks DTM Calib Administrator Offline Ex Member Posts: 25671 Northern Hemisphere Gender: Drives: Astra J, Mum Bus, Dexta Tractor, 108 DMU wip	Re: Calliper Hole Spacing. Reply #1 - 03. Aug 2006 at 09:04 I dont know the spacing but, there is a reasonable chance they will fit as Mercedes use the same brake setup supplier....
Back to top	IP Logged

Davey Junior Member Offline Posts: 111 Berkshire Gender:	Re: Calliper Hole Spacing. Reply #2 - 03. Aug 2006 at 09:08 Bonus! I need some decent anchors for the new engine and these seem to be a promising solution, plus they'll look standard in the black powder coat
Back to top	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

This is the old site. Please use the new site.

« Home

‹ Board

Top of this page