This is the old site. Please use the new site.

  Welcome, Guest. Please Login
Omega Owners Forum
 
  Home Shop Help Search Members Login  
 

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

 
Page Index Toggle Pages: 1
Send Topic Print
Compression testing - help please (Read 533 times)
The Barge Captain
Omega Knight
*****
Offline


Back in the land of the
economicaly active

Posts: 1827
Bristol
Gender: male

Drives: Saab 95 vector sport 1.9TiD
Compression testing - help please
13. Aug 2006 at 19:49
 
Silly question I know, but how do i compression test my omega? (yes I do have a tester), only the last car i used it on, i was able to dissconnect the LT from the coil so the darned thing wouldn't start.  What do i need to do on the 2.0 lump? especially as I don't want to pump unburnt fuel into the cat - it's loosing fur as it is!
Back to top
 

Thou art no more an angel filled with light, but a leech to be abhorred and thou shalt suffer my burning will...
 
IP Logged
 
Marks DTM Calib
Administrator
****************
Offline


Ex Member

Posts: 25671
Northern Hemisphere
Gender: male

Drives: Astra J, Mum Bus, Dexta Tractor, 108 DMU wip
Re: Compression testing - help please
Reply #1 - 13. Aug 2006 at 20:36
 
Remove the fuel pump relay or disconnect the crank sensor......dont forget you need throttle fully open for a compression test.

But, looking at your other post, it will be blocked breathers causing the crank case pressure.
Back to top
 
Marks DTM Calib  
IP Logged
 
The Barge Captain
Omega Knight
*****
Offline


Back in the land of the
economicaly active

Posts: 1827
Bristol
Gender: male

Drives: Saab 95 vector sport 1.9TiD
Re: Compression testing - help please
Reply #2 - 14. Aug 2006 at 09:29
 
OK thanks. I willl give this a try. Hopefully reducing the pressure will mean that i won't need to replace the gasket.
Back to top
 

Thou art no more an angel filled with light, but a leech to be abhorred and thou shalt suffer my burning will...
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print

This is the old site. Please use the new site.