This is the old site. Please use the new site.

  Welcome, Guest. Please Login
Omega Owners Forum
 
  Home Shop Help Search Members Login  
 

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

 
Pages: 1 2 
Send Topic Print
paper clip results are in (Read 1699 times)
JasonH
Senior Member
****
Offline



Posts: 953
Bristol
Gender: male
Re: paper clip results are in
Reply #15 - 15. Jan 2007 at 20:06
 
Without wanting to start an Error Code 31 debate....

My car always gives a 31 when not running and it always disappears when running. I have replaced a crank sensor (which fixed a problem) but the error 31 has always behaved in the same way.

So, I would say ignore the 31.
Back to top
 
 
IP Logged
 
dragon33
Newbie
*
Offline



Posts: 30
swansea
Gender: male
Re: paper clip results are in
Reply #16 - 15. Jan 2007 at 20:43
 
thanks for that jason h ,but anyway to "the boy" found problem eml now gone off  finally ,see if you can shed any light on this ,knock sensor wire consits of an outer screen and an insulated single wire,outer screen was broken and possibly shorting on broken piece of insulated wire ,i have now connected outer screen back up by way of a temporary link,is the screen irrelevant or is it a return path for pulses to the ecu.also would short in knock sensor stop car from starting.
Back to top
 
dragon33  
IP Logged
 
TheBoy
Administrator
****************
Offline


TBE has an MOT!

Posts: 64817
Brackley, Northants
Gender: male

Drives: 98 MV6, 03 Elite, 00 25, 89 ZX10
Re: paper clip results are in
Reply #17 - 15. Jan 2007 at 21:06
 
dragon33 wrote on 15. Jan 2007 at 20:43:
thanks for that jason h ,but anyway to "the boy" found problem eml now gone off  finally ,see if you can shed any light on this ,knock sensor wire consits of an outer screen and an insulated single wire,outer screen was broken and possibly shorting on broken piece of insulated wire ,i have now connected outer screen back up by way of a temporary link,is the screen irrelevant or is it a return path for pulses to the ecu.also would short in knock sensor stop car from starting.

Knock sensor would not stop car starting. It would make it perform badly though.

The wire is a coax type, and yes, the screen is part of the circuit...
Back to top
 

If you are going to kick a car, remember to wear appropriate footwear
Any posts are the result of my own views as a member of OOF, which may or may not be the same as my views as part of the Admin Team.
WWW  
IP Logged
 
TheBoy
Administrator
****************
Offline


TBE has an MOT!

Posts: 64817
Brackley, Northants
Gender: male

Drives: 98 MV6, 03 Elite, 00 25, 89 ZX10
Re: paper clip results are in
Reply #18 - 15. Jan 2007 at 21:08
 
JasonH wrote on 15. Jan 2007 at 20:06:
Without wanting to start an Error Code 31 debate....

My car always gives a 31 when not running and it always disappears when running. I have replaced a crank sensor (which fixed a problem) but the error 31 has always behaved in the same way.

So, I would say ignore the 31.

WRT to crank sensor codes...

19 is conclusive - knacker sensor
31 is non conclusive on a non running engine (I thought Dragon33's car wouldn't start)
Back to top
 

If you are going to kick a car, remember to wear appropriate footwear
Any posts are the result of my own views as a member of OOF, which may or may not be the same as my views as part of the Admin Team.
WWW  
IP Logged
 
JasonH
Senior Member
****
Offline



Posts: 953
Bristol
Gender: male
Re: paper clip results are in
Reply #19 - 15. Jan 2007 at 21:49
 
I agree!!! The 31 code is no help to man nor beast  Wink
Back to top
 
 
IP Logged
 
Pages: 1 2 
Send Topic Print

This is the old site. Please use the new site.