This is the old site. Please use the new site.

18. Apr 2026 at 09:33

	Welcome, Guest. Please Login

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

Omega Owners Forum › Omega Help › Omega General Help › Where dose Y split part go ?

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1

Send Topic

Print

Where dose Y split part go ? (Read 438 times)

SP_3.2 Omega Baron Offline Posts: 2042 Leicester Gender: Drives: A8 3.7 QS 2000	Where dose Y split part go ? 24. Sep 2007 at 12:44 Hi all would any of you guys have a pic of where the end of the y split part of the Brether goes into? is it on the same as the Vent housing could not see it Thank for your help all. steve
Back to top	Also drive a Savage 25 niro truck...and flys a Bell 47 twister Savage 46 ss and a Tamiya audi TT ..for now. IP Logged

Marks DTM Calib Administrator Offline Ex Member Posts: 25671 Northern Hemisphere Gender: Drives: Astra J, Mum Bus, Dexta Tractor, 108 DMU wip	Re: Where dose Y split part go ? Reply #1 - 24. Sep 2007 at 13:01 Yep, connects to the vent housing to a larger pipe closer to the centre of the engine than the small one.
Back to top	IP Logged

SP_3.2 Omega Baron Offline Posts: 2042 Leicester Gender: Drives: A8 3.7 QS 2000	Re: Where dose Y split part go ? Reply #2 - 24. Sep 2007 at 13:04 Thanks for that. Now would that one be hard to get to without removing the scu panel? Thanks for infor.
Back to top	Also drive a Savage 25 niro truck...and flys a Bell 47 twister Savage 46 ss and a Tamiya audi TT ..for now. IP Logged

Page Index Toggle

Pages: 1

Send Topic

Print

‹ Previous Topic | Next Topic ›

This is the old site. Please use the new site.

Top of this page

Omega Owners Forum » Powered by YaBB 2.5 AE!
YaBB Forum Software © 2000-2010. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge