15. Dec 2025 at 13:49

	Welcome, Guest. Please Login

Shop

Help

Members

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

Omega Owners Forum › Omega Help › Omega General Help › using parts between 2.5 and 2.6's and 3.0 cams...

‹ Previous Topic | Next Topic ›

Pages: 1

using parts between 2.5 and 2.6's and 3.0 cams... (Read 821 times)

ngrainqey

Omega Baron

Offline

Posts: 2311
rotherham
Gender: male

Drives: Volvo S60 P2.5 T5

using parts between 2.5 and 2.6's and 3.0 cams...
25. Oct 2008 at 05:23

hiya,
just a quicky plus clears up some stuff for newbies when i get the replies...

can you use parts from the x25 such as cams on the y26 for example engine parts and can you use the 3.0 cams on the 2.6 or do you need the 3.2 ones if you know what i mean?

also is it just the bellhousing that you have to swap to use the ar25/35 on the 2.6 n 3.2?

only thing is if i cant get my 2.0/2.5 mish mash mobile running with immobiliser problems between wiring looms then it's getting broken for bits - i'm gna have v6 bits coming out of my ears!
thanks

Volvo S60 P2.5 T5 mmmm!

IP Logged

Timbuk Omega Baron Offline owned a Datsun 120y once! Posts: 3866 Coventry Gender: Drives: 1998 Irmscher MV6	Re: using parts between 2.5 and 2.6's and 3.0 cams... Reply #1 - 25. Oct 2008 at 12:36 IIRC i think Marks DTM has/is or wants to look into the 3.0 cams into a 2.6 scenario.
Back to top	Stop Fecking About With My Profile IP Logged

tmx Omega Baron Offline Posts: 2236 Herefordshire Gender: Drives: 3.2 MV6 in an omega again!!	Re: using parts between 2.5 and 2.6's and 3.0 cams... Reply #2 - 25. Oct 2008 at 13:22 yes as the 2.6 Facelift GSi Vectra has 3.0 omega cams in it check on the vectra owners club
Back to top	IP Logged

ngrainqey Omega Baron Offline Posts: 2311 rotherham Gender: Drives: Volvo S60 P2.5 T5	Re: using parts between 2.5 and 2.6's and 3.0 cams... Reply #3 - 25. Oct 2008 at 13:45 riiight... might have a nosey on vvoc if i can. maybe a mod can make a sticky or something in tech info about using cams in the newer/older engines
Back to top	Volvo S60 P2.5 T5 mmmm! IP Logged

coldanconversions Newbie Offline Posts: 12 West Yorkshire Gender:	Re: using parts between 2.5 and 2.6's and 3.0 cams... Reply #4 - 25. Oct 2008 at 15:32 i have some 3 litre cams for sale on ebay mate
Back to top	IP Logged

Marks DTM Calib Administrator Offline Ex Member Posts: 25671 Northern Hemisphere Gender: Drives: Astra J, Mum Bus, Dexta Tractor, 108 DMU wip	Re: using parts between 2.5 and 2.6's and 3.0 cams... Reply #5 - 25. Oct 2008 at 15:42 coldanconversions wrote on 25. Oct 2008 at 15:32: i have some 3 litre cams for sale on ebay mate Just as anote....the cam bearing caps should stay with the head
Back to top	IP Logged

ngrainqey Omega Baron Offline Posts: 2311 rotherham Gender: Drives: Volvo S60 P2.5 T5	Re: using parts between 2.5 and 2.6's and 3.0 cams... Reply #6 - 25. Oct 2008 at 16:00 Marks DTM Calib wrote on 25. Oct 2008 at 15:42: coldanconversions wrote on 25. Oct 2008 at 15:32: i have some 3 litre cams for sale on ebay mate Just as anote....the cam bearing caps should stay with the head hmmm.. have to take mine off then unless the cams end up goin with the head
Back to top	Volvo S60 P2.5 T5 mmmm! IP Logged

Marks DTM Calib Administrator Offline Ex Member Posts: 25671 Northern Hemisphere Gender: Drives: Astra J, Mum Bus, Dexta Tractor, 108 DMU wip	Re: using parts between 2.5 and 2.6's and 3.0 cams... Reply #7 - 25. Oct 2008 at 16:05 Reason is that the cam bearings are line bored with the head......and hence must stay in the correct position and with the correct head!
Back to top	IP Logged

Martin Imber Over Active Poster Offline LPG Omega V6 - Keyfobs Rebuilt Posts: 20110 Worcester Gender: Drives: 2001 Omega 2.6CD LPG & 3.0 cams	Re: using parts between 2.5 and 2.6's and 3.0 cams... Reply #8 - 25. Oct 2008 at 21:31 I have been told to use 3.0 or 3.2 cams - which I will do next year
Back to top	The other tuned 2.6. DIY LPG, towbar, upgrade ICE & Wing Spoiler, Air shocks, Eibach Pro Springs, Poly WB bushes, WIM setup, HID conversion, 3.0 cams, ported ect. IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

This is the old site. Please use the new site.

« Home

‹ Board

Top of this page