This is the old site. Please use the new site.

  Welcome, Guest. Please Login
Omega Owners Forum
 
  Home Shop Help Search Members Login  
 

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

 
Page Index Toggle Pages: 1
Send Topic Print
How hard can it be (Read 480 times)
topcat
Newbie
*
Offline



Posts: 37
Doncaster
Gender: male

Drives: 98 omega 2.5 estate yamaha yzf750r
How hard can it be
25. Oct 2008 at 19:24
 
Need to change exhaust manifold gasket on near side allso noticed a stud broken off flush with manifold .Haynes says remove engine or head is this right just what is it that stops it to come off and how long a job hope someone can help thanks
Back to top
 
 
IP Logged
 
Marks DTM Calib
Administrator
****************
Offline


Ex Member

Posts: 25671
Northern Hemisphere
Gender: male

Drives: Astra J, Mum Bus, Dexta Tractor, 108 DMU wip
Re: How hard can it be
Reply #1 - 25. Oct 2008 at 19:44
 
Which engine?
Back to top
 
Marks DTM Calib  
IP Logged
 
topcat
Newbie
*
Offline



Posts: 37
Doncaster
Gender: male

Drives: 98 omega 2.5 estate yamaha yzf750r
Re: How hard can it be
Reply #2 - 25. Oct 2008 at 19:47
 
sorry a 2.5 v6
Back to top
 
 
IP Logged
 
serek
Omega Knight
*****
Offline



Posts: 1178
huntingdon
Gender: male

Drives: 3.2 ELITE IRMSCHER**MANUAL** LSD**
Re: How hard can it be
Reply #3 - 25. Oct 2008 at 20:21
 
Back to top
 

...
 
IP Logged
 
Marks DTM Calib
Administrator
****************
Offline


Ex Member

Posts: 25671
Northern Hemisphere
Gender: male

Drives: Astra J, Mum Bus, Dexta Tractor, 108 DMU wip
Re: How hard can it be
Reply #4 - 25. Oct 2008 at 21:04
 
Yes it can be one....worst case is you have to remove the engine mounts hilst supporting the lump so you cna shift it over to the drivers side by an inch.

Its actulay quicker than the drivers side to do.

The broken stud might be a challenge though!
Back to top
 
Marks DTM Calib  
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print

This is the old site. Please use the new site.