01. Mar 2026 at 02:16

	Welcome, Guest. Please Login

Shop

Help

Members

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

Omega Owners Forum › For Sale › Car Parts, bits For Sale & Wanted › Breaking prefacelift mv6 1998

‹ Previous Topic | Next Topic ›

Pages: 1 2 3

Breaking prefacelift mv6 1998 (Read 4775 times)

Bumbazor Senior Member Offline Posts: 579 Worksop Gender: Drives: 99 (T) 2.5 V6 CDX with FL bumpers and some Elite stuff	Re: Breaking prefacelift mv6 1998 Reply #15 - 05. May 2009 at 19:28 Hi, I read your PM first. Should have checked here before. I'll need the headlight washer pump with the bottle too if it comes without. I have all pipes. PM me with new price. As I said I'll pass on the wheels but thanks for considering me.
Back to top	To do: Replace brake discs and pads; adjust already replaced shoes; check for leaks in oil cooler, cambelt area, crank seals, sump, dipstick; replace osf door; replace a tyre; clean, MOT. IP Logged

RobseyMV6 Senior Member Offline Posts: 710 west sussex Gender: Drives: lots :)	Re: Breaking prefacelift mv6 1998 Reply #16 - 05. May 2009 at 19:42 PM sent
Back to top	IP Logged

woodsy_mv6

Junior Member

Offline

Posts: 209
West Sussex
Gender: male

Drives: Too Many Cars

Re: Breaking prefacelift mv6 1998
Reply #17 - 07. May 2009 at 10:01

Hi Rob.

How much was it you were after for the wheels?
Also, what kind of nick is the header tank in? Me rebuilds starting to come together now, and its the last thing on my list. Refuse to pay stealer prices for that Grin

This ain't the one you showed me a year or so ago is it, with the popped tensioners??
O', and never got to thank you and your misses for the bump start Embarrassed

« Last Edit: 07. May 2009 at 10:06 by woodsy_mv6 »

From the moment I picked up your book until I laid it down, I was convulsed with laughter. Some day I intend reading it.

IP Logged

RobseyMV6 Senior Member Offline Posts: 710 west sussex Gender: Drives: lots :)	Re: Breaking prefacelift mv6 1998 Reply #18 - 07. May 2009 at 11:15 Hi there! The bump start was at least some exercise for her PM sent
Back to top	IP Logged

going crazy Intermediate Member Offline Posts: 418 Middlesex Gender: Drives: 1995 2.0 GLS Automatic	Re: Breaking prefacelift mv6 1998 Reply #19 - 07. May 2009 at 20:28 RobseyMV6 wrote on 05. May 2009 at 12:17: Yes, PM sent Rob/ Marti, Recieved the item today. Thanks again, hopefully I will figure out how to remove the window handle & get to replacing this over the w/e Thanks, Suhas
Back to top	IP Logged

RobseyMV6 Senior Member Offline Posts: 710 west sussex Gender: Drives: lots :)	Re: Breaking prefacelift mv6 1998 Reply #20 - 07. May 2009 at 20:32 No problem Suhas
Back to top	« Last Edit: 07. May 2009 at 20:33 by RobseyMV6 » IP Logged

MV6Matt Senior Member Offline On 19's with 3 litre cams and Irmscher kit Posts: 812 London Gender: Drives: '98 2.5 V6 CDX Estate (in MV6 guise with lots of Irmscher)	Re: Breaking prefacelift mv6 1998 Reply #21 - 08. May 2009 at 07:57 MutantCav wrote on 04. May 2009 at 23:08: I have a couple of 3.0 heads here mate and a set of 3.0 cams if the engine from this sells as a whole Can you use the 3.0 Cylinder heads in a 2.5 engine like the 3.0 litre cams? ....Or have I got the wrong end of the stick?
Back to top	IP Logged

RobseyMV6 Senior Member Offline Posts: 710 west sussex Gender: Drives: lots :)	Re: Breaking prefacelift mv6 1998 Reply #22 - 08. May 2009 at 19:23 Ok still have the engine for sale, yet another time waster from ebay lets you down again
Back to top	IP Logged

doz Junior Member Offline Posts: 191 Southampton Gender: Drives: 3lt "Growbag" Carlton GSi/LC	Re: Breaking prefacelift mv6 1998 Reply #23 - 08. May 2009 at 21:50 How much do you want for the engine loom? If it's not been cut etc?
Back to top	If you have to ask you wouldn't understand IP Logged

924boy Intermediate Member Offline Posts: 306 Rhuddlan, N. Wales Gender: Drives: '05 Astra SRI	Re: Breaking prefacelift mv6 1998 Reply #24 - 08. May 2009 at 21:58 carbon fibre dash parts and door card trims available?
Back to top	« Last Edit: 08. May 2009 at 21:58 by 924boy » IP Logged

RobseyMV6 Senior Member Offline Posts: 710 west sussex Gender: Drives: lots :)	Re: Breaking prefacelift mv6 1998 Reply #25 - 09. May 2009 at 08:27 doz wrote on 08. May 2009 at 21:50: How much do you want for the engine loom? If it's not been cut etc? I`ve got several wiring looms, are you after the 3.0 auto? PM sent
Back to top	IP Logged

RobseyMV6 Senior Member Offline Posts: 710 west sussex Gender: Drives: lots :)	Re: Breaking prefacelift mv6 1998 Reply #26 - 09. May 2009 at 08:33 924boy wrote on 08. May 2009 at 21:58: carbon fibre dash parts and door card trims available? Yup, got that PM sent
Back to top	IP Logged

mikeh Junior Member Offline Posts: 80 London Gender: Drives: 99 2.5 Petrol CDX Auto Pre-Fac	Re: Breaking prefacelift mv6 1998 Reply #27 - 10. May 2009 at 22:23 Hi, do you have the drivers side door check strap and mechanism. Thanks.
Back to top	IP Logged

Sheepie Newbie Offline Posts: 42	Re: Breaking prefacelift mv6 1998 Reply #28 - 10. May 2009 at 22:30 Hi mate can you pm me you are lowest price on teh engine please as i need 1 to save my car from the scrap yard
Back to top	IP Logged

RobseyMV6 Senior Member Offline Posts: 710 west sussex Gender: Drives: lots :)	Re: Breaking prefacelift mv6 1998 Reply #29 - 11. May 2009 at 18:09 Sheepie wrote on 10. May 2009 at 22:30: Hi mate can you pm me you are (I'm just lazy, can't be bothered to type 'you are') lowest price on teh engine please as i need 1 to save my car from the scrap yard Pm sent
Back to top	IP Logged

Pages: 1 2 3

‹ Previous Topic | Next Topic ›

This is the old site. Please use the new site.

« Home

‹ Board

Top of this page