Omega Owners Forum - Breaking prefacelift mv6 1998

RobseyMV6 Senior Member Offline Posts: 710 west sussex Gender: Drives: lots :)	Breaking prefacelift mv6 1998 04. May 2009 at 18:20 Omega mv6 auto in blue saloon paint code Z 282, low mileage 93K but new engine fitted in 2004, cloth recaro seats, all complete but no washer jets... Middle and back boxes are no good, apart from that, the rest can go to a new home
Back to top	« Last Edit: 04. May 2009 at 18:21 by RobseyMV6 » IP Logged

Bumbazor Senior Member Offline Posts: 579 Worksop Gender: Drives: 99 (T) 2.5 V6 CDX with FL bumpers and some Elite stuff	Re: Breaking prefacelift mv6 1998 Reply #1 - 04. May 2009 at 21:01 What condition are the wheels and tyres in? I have cash waiting. You have PM.
Back to top	To do: Replace brake discs and pads; adjust already replaced shoes; check for leaks in oil cooler, cambelt area, crank seals, sump, dipstick; replace osf door; replace a tyre; clean, MOT. IP Logged

tmx Omega Baron Offline Posts: 2236 Herefordshire Gender: Drives: 3.2 MV6 in an omega again!!	Re: Breaking prefacelift mv6 1998 Reply #2 - 04. May 2009 at 21:34 How much for 2x 3 Litre Heads with cams then & the headlamp washer jets & pipes?
Back to top	IP Logged

RobseyMV6 Senior Member Offline Posts: 710 west sussex Gender: Drives: lots :)	Re: Breaking prefacelift mv6 1998 Reply #3 - 04. May 2009 at 21:48 Bumbazor wrote on 04. May 2009 at 21:01: What condition are the wheels and tyres in? I have cash waiting. You have PM. the wheels are potentially sold, waiting to hear from the guy about pick-up
Back to top	IP Logged

RobseyMV6

Senior Member

Offline

Posts: 710
west sussex
Gender: male

Drives: lots :)

Re: Breaking prefacelift mv6 1998
Reply #4 - 04. May 2009 at 21:54

tmx wrote on 04. May 2009 at 21:34:

How much for 2x 3 Litre Heads with cams then & the headlamp washer jets & pipes?

both washer jets were broken off
i do have pipes to the pumps, how much of the pipework do you need?
as to heads, engine may be sold complete this week, waiting to hear back. I`ll update you if i still have it, thanks

Back to top

IP Logged

tmx Omega Baron Offline Posts: 2236 Herefordshire Gender: Drives: 3.2 MV6 in an omega again!!	Re: Breaking prefacelift mv6 1998 Reply #5 - 04. May 2009 at 22:59 i need the nozzle bits with the plastic nozzley bit pipes mate
Back to top	IP Logged

RobseyMV6 Senior Member Offline Posts: 710 west sussex Gender: Drives: lots :)	Re: Breaking prefacelift mv6 1998 Reply #6 - 04. May 2009 at 23:06 tmx wrote on 04. May 2009 at 22:59: i need the nozzle bits with the plastic nozzley bit pipes mate Did you mean the part that bolts on to the under side of the xenon headlights? and pipes running just to the pump?
Back to top	IP Logged

MutantCav Omega Baron Offline Posts: 4585 Gainsborough Gender: Drives: 3.0 2000 Mini Facelift Elite Saloon	Re: Breaking prefacelift mv6 1998 Reply #7 - 04. May 2009 at 23:08 I have a couple of 3.0 heads here mate and a set of 3.0 cams if the engine from this sells as a whole
Back to top	Lots of Omega Parts Available...Anyone Need Anything?? IP Logged

RobseyMV6 Senior Member Offline Posts: 710 west sussex Gender: Drives: lots :)	Re: Breaking prefacelift mv6 1998 Reply #8 - 04. May 2009 at 23:18 MutantCav wrote on 04. May 2009 at 23:08: I have a couple of 3.0 heads here mate and a set of 3.0 cams if the engine from this sells as a whole Will sale engine as hole, so hope he takes up your offer
Back to top	« Last Edit: 04. May 2009 at 23:19 by RobseyMV6 » IP Logged

going crazy Intermediate Member Offline Posts: 418 Middlesex Gender: Drives: 1995 2.0 GLS Automatic	Re: Breaking prefacelift mv6 1998 Reply #9 - 05. May 2009 at 10:45 Any luck with the rear door soleniod fitting mine? The number I have on mine is 90449074. Love to have central locking work on all the doors Thanks
Back to top	IP Logged

RobseyMV6 Senior Member Offline Posts: 710 west sussex Gender: Drives: lots :)	Re: Breaking prefacelift mv6 1998 Reply #10 - 05. May 2009 at 12:17 Yes, PM sent
Back to top	IP Logged

Bumbazor Senior Member Offline Posts: 579 Worksop Gender: Drives: 99 (T) 2.5 V6 CDX with FL bumpers and some Elite stuff	Re: Breaking prefacelift mv6 1998 Reply #11 - 05. May 2009 at 13:30 Hi, heard anything about the wheels yet? Also is the washer bottle available? I've just fitted headlight washers to mine and need a bottle with dual output. Thanks
Back to top	To do: Replace brake discs and pads; adjust already replaced shoes; check for leaks in oil cooler, cambelt area, crank seals, sump, dipstick; replace osf door; replace a tyre; clean, MOT. IP Logged

RobseyMV6

Senior Member

Offline

Posts: 710
west sussex
Gender: male

Drives: lots :)

Re: Breaking prefacelift mv6 1998
Reply #12 - 05. May 2009 at 18:36

Bumbazor wrote on 05. May 2009 at 13:30:

Hi, heard anything about the wheels yet?

Also is the washer bottle available? I've just fitted headlight washers to mine and need a bottle with dual output.

The guy should have turned up an hour ago Angry

so looks like i have the wheels still. I hate time wasters Angry

Washer bottle i have, both preface and facelift, what bottle are you after? Thumbs Up!

Back to top

IP Logged

Bumbazor Senior Member Offline Posts: 579 Worksop Gender: Drives: 99 (T) 2.5 V6 CDX with FL bumpers and some Elite stuff	Re: Breaking prefacelift mv6 1998 Reply #13 - 05. May 2009 at 18:48 I need the bottle for my pre facelift car but it has to have the output for headlight washers.
Back to top	To do: Replace brake discs and pads; adjust already replaced shoes; check for leaks in oil cooler, cambelt area, crank seals, sump, dipstick; replace osf door; replace a tyre; clean, MOT. IP Logged

RobseyMV6 Senior Member Offline Posts: 710 west sussex Gender: Drives: lots :)	Re: Breaking prefacelift mv6 1998 Reply #14 - 05. May 2009 at 18:56 Ok have here, do you need anything but the washer bottle? eg pumps/pipes?
Back to top	IP Logged

Bumbazor Senior Member Offline Posts: 579 Worksop Gender: Drives: 99 (T) 2.5 V6 CDX with FL bumpers and some Elite stuff	Re: Breaking prefacelift mv6 1998 Reply #15 - 05. May 2009 at 19:28 Hi, I read your PM first. Should have checked here before. I'll need the headlight washer pump with the bottle too if it comes without. I have all pipes. PM me with new price. As I said I'll pass on the wheels but thanks for considering me.
Back to top	To do: Replace brake discs and pads; adjust already replaced shoes; check for leaks in oil cooler, cambelt area, crank seals, sump, dipstick; replace osf door; replace a tyre; clean, MOT. IP Logged

RobseyMV6 Senior Member Offline Posts: 710 west sussex Gender: Drives: lots :)	Re: Breaking prefacelift mv6 1998 Reply #16 - 05. May 2009 at 19:42 PM sent
Back to top	IP Logged

woodsy_mv6

Junior Member

Offline

Posts: 209
West Sussex
Gender: male

Drives: Too Many Cars

Re: Breaking prefacelift mv6 1998
Reply #17 - 07. May 2009 at 10:01

Hi Rob.

How much was it you were after for the wheels?
Also, what kind of nick is the header tank in? Me rebuilds starting to come together now, and its the last thing on my list. Refuse to pay stealer prices for that Grin

This ain't the one you showed me a year or so ago is it, with the popped tensioners??
O', and never got to thank you and your misses for the bump start Embarrassed

Back to top

« Last Edit: 07. May 2009 at 10:06 by woodsy_mv6 »

From the moment I picked up your book until I laid it down, I was convulsed with laughter. Some day I intend reading it.

IP Logged

RobseyMV6 Senior Member Offline Posts: 710 west sussex Gender: Drives: lots :)	Re: Breaking prefacelift mv6 1998 Reply #18 - 07. May 2009 at 11:15 Hi there! The bump start was at least some exercise for her PM sent
Back to top	IP Logged

going crazy Intermediate Member Offline Posts: 418 Middlesex Gender: Drives: 1995 2.0 GLS Automatic	Re: Breaking prefacelift mv6 1998 Reply #19 - 07. May 2009 at 20:28 RobseyMV6 wrote on 05. May 2009 at 12:17: Yes, PM sent Rob/ Marti, Recieved the item today. Thanks again, hopefully I will figure out how to remove the window handle & get to replacing this over the w/e Thanks, Suhas
Back to top	IP Logged

RobseyMV6 Senior Member Offline Posts: 710 west sussex Gender: Drives: lots :)	Re: Breaking prefacelift mv6 1998 Reply #20 - 07. May 2009 at 20:32 No problem Suhas
Back to top	« Last Edit: 07. May 2009 at 20:33 by RobseyMV6 » IP Logged

MV6Matt Senior Member Offline On 19's with 3 litre cams and Irmscher kit Posts: 812 London Gender: Drives: '98 2.5 V6 CDX Estate (in MV6 guise with lots of Irmscher)	Re: Breaking prefacelift mv6 1998 Reply #21 - 08. May 2009 at 07:57 MutantCav wrote on 04. May 2009 at 23:08: I have a couple of 3.0 heads here mate and a set of 3.0 cams if the engine from this sells as a whole Can you use the 3.0 Cylinder heads in a 2.5 engine like the 3.0 litre cams? ....Or have I got the wrong end of the stick?
Back to top	IP Logged

RobseyMV6 Senior Member Offline Posts: 710 west sussex Gender: Drives: lots :)	Re: Breaking prefacelift mv6 1998 Reply #22 - 08. May 2009 at 19:23 Ok still have the engine for sale, yet another time waster from ebay lets you down again
Back to top	IP Logged

doz Junior Member Offline Posts: 191 Southampton Gender: Drives: 3lt "Growbag" Carlton GSi/LC	Re: Breaking prefacelift mv6 1998 Reply #23 - 08. May 2009 at 21:50 How much do you want for the engine loom? If it's not been cut etc?
Back to top	If you have to ask you wouldn't understand IP Logged

924boy Intermediate Member Offline Posts: 306 Rhuddlan, N. Wales Gender: Drives: '05 Astra SRI	Re: Breaking prefacelift mv6 1998 Reply #24 - 08. May 2009 at 21:58 carbon fibre dash parts and door card trims available?
Back to top	« Last Edit: 08. May 2009 at 21:58 by 924boy » IP Logged

RobseyMV6 Senior Member Offline Posts: 710 west sussex Gender: Drives: lots :)	Re: Breaking prefacelift mv6 1998 Reply #25 - 09. May 2009 at 08:27 doz wrote on 08. May 2009 at 21:50: How much do you want for the engine loom? If it's not been cut etc? I`ve got several wiring looms, are you after the 3.0 auto? PM sent
Back to top	IP Logged

RobseyMV6 Senior Member Offline Posts: 710 west sussex Gender: Drives: lots :)	Re: Breaking prefacelift mv6 1998 Reply #26 - 09. May 2009 at 08:33 924boy wrote on 08. May 2009 at 21:58: carbon fibre dash parts and door card trims available? Yup, got that PM sent
Back to top	IP Logged

mikeh Junior Member Offline Posts: 80 London Gender: Drives: 99 2.5 Petrol CDX Auto Pre-Fac	Re: Breaking prefacelift mv6 1998 Reply #27 - 10. May 2009 at 22:23 Hi, do you have the drivers side door check strap and mechanism. Thanks.
Back to top	IP Logged

Sheepie Newbie Offline Posts: 42	Re: Breaking prefacelift mv6 1998 Reply #28 - 10. May 2009 at 22:30 Hi mate can you pm me you are lowest price on teh engine please as i need 1 to save my car from the scrap yard
Back to top	IP Logged

RobseyMV6 Senior Member Offline Posts: 710 west sussex Gender: Drives: lots :)	Re: Breaking prefacelift mv6 1998 Reply #29 - 11. May 2009 at 18:09 Sheepie wrote on 10. May 2009 at 22:30: Hi mate can you pm me you are (I'm just lazy, can't be bothered to type 'you are') lowest price on teh engine please as i need 1 to save my car from the scrap yard Pm sent
Back to top	IP Logged

RobseyMV6 Senior Member Offline Posts: 710 west sussex Gender: Drives: lots :)	Re: Breaking prefacelift mv6 1998 Reply #30 - 11. May 2009 at 18:22 mikeh wrote on 10. May 2009 at 22:23: Hi, do you have the drivers side door check strap and mechanism. Thanks. Sorry all damaged what i had here
Back to top	IP Logged

barclay03 Intermediate Member Offline Posts: 381 Glasgow Gender: Drives: '98 MV6 Manual	Re: Breaking prefacelift mv6 1998 Reply #31 - 12. May 2009 at 21:04 Drivers side glovebox?
Back to top	IP Logged

RobseyMV6 Senior Member Offline Posts: 710 west sussex Gender: Drives: lots :)	Re: Breaking prefacelift mv6 1998 Reply #32 - 12. May 2009 at 21:26 barclay03 wrote on 12. May 2009 at 21:04: Drivers side glovebox? Will look tomorrow evening to see if any good, have a facelift one here but not sure if the same but looks it. PM sent
Back to top	IP Logged

hotel21 Administrator Offline Posts: 12766 Doghouse Gender: Drives: into lamposts	Re: Breaking prefacelift mv6 1998 Reply #33 - 12. May 2009 at 22:29 Facelift ashtray complete??
Back to top	Tech 2 available in Scotland. click on -> http://theboy.omegaowners.com for prices..... IP Logged

RobseyMV6 Senior Member Offline Posts: 710 west sussex Gender: Drives: lots :)	Re: Breaking prefacelift mv6 1998 Reply #34 - 13. May 2009 at 06:35 Sorry Broocie, facelift was ex police, so none there..
Back to top	IP Logged

adomz Newbie Offline Posts: 7 Wembley Gender: Drives: 2.5 v6	Re: Breaking prefacelift mv6 1998 Reply #35 - 14. May 2009 at 14:49 hello mate!! could i see some pictures of the front seats, as i will be looking for some, cheers!! Adam
Back to top	Angle grinder and welder is like photoshop, it's just the application that differs IP Logged

RobseyMV6 Senior Member Offline Posts: 710 west sussex Gender: Drives: lots :)	Re: Breaking prefacelift mv6 1998 Reply #36 - 14. May 2009 at 19:38 adomz wrote on 14. May 2009 at 14:49: hello mate!! could i see some pictures of the front seats, as i will be looking for some, cheers!! Adam PM me you're email address and i'll send you some pic this weekend
Back to top	IP Logged

adomz Newbie Offline Posts: 7 Wembley Gender: Drives: 2.5 v6	Re: Breaking prefacelift mv6 1998 Reply #37 - 15. May 2009 at 03:32 the pm has been sent! Adam
Back to top	Angle grinder and welder is like photoshop, it's just the application that differs IP Logged

adomz Newbie Offline Posts: 7 Wembley Gender: Drives: 2.5 v6	Re: Breaking prefacelift mv6 1998 Reply #38 - 18. May 2009 at 15:25 any updares on the pics man?
Back to top	Angle grinder and welder is like photoshop, it's just the application that differs IP Logged

kentelite Newbie Offline Posts: 5	Re: Breaking prefacelift mv6 1998 Reply #39 - 19. May 2009 at 23:37 Don't suppose you still have the offside windscreen washer jet housing and underbonnet connection (for an M reg Elite)? Chris
Back to top	IP Logged

arlee219 Junior Member Offline Posts: 71 Birmingham Gender: Drives: 2.2 CD Auto LPG Xreg	Re: Breaking prefacelift mv6 1998 Reply #40 - 21. May 2009 at 20:59 Hi bud I'm after front bumper with fog lights for 2.2CD Auto Xreg I've seen yours like unpainted, which suits me, but wondered if that would fit? Should it be any good for mine, is there a chance for it and what's the price? cheerio
Back to top	« Last Edit: 21. May 2009 at 21:02 by arlee219 » 2.2 CD Auto LPG Conv Xreg IP Logged

RobseyMV6 Senior Member Offline Posts: 710 west sussex Gender: Drives: lots :)	Re: Breaking prefacelift mv6 1998 Reply #41 - 08. Jun 2009 at 19:48 still many parts left off this blue mig. all parts have been removed for quick despatch
Back to top	IP Logged

This is the old site. Please use the new site.

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

This is the old site. Please use the new site.

	Welcome, Guest. Please Login