Omega Owners Forum - multiplug connector..

tunnie Over Active Poster Offline Posts: 22520 London, W3 Gender: Drives: 2.2 CD (LPG'd) & BMW R1200 GS	multiplug connector.. 21. May 2009 at 20:11 i am really getting annoyed at finding a male/female multiplug connector, i need a small one for the indicator wiring on my bike but no ware does what i want, maplins is bloody useless I am just going to cheat and use a block connector
Back to top	Do you break V6's as often as TheBoy? Then you need tunnie's towing services, recovery costs are just the humiliation of being towed by 2/3's of an engine IP Logged

tunnie Over Active Poster Offline Posts: 22520 London, W3 Gender: Drives: 2.2 CD (LPG'd) & BMW R1200 GS	Re: multiplug connector.. Reply #1 - 21. May 2009 at 20:17 closest i can find is this.... Bullet terminal & plugs
Back to top	Do you break V6's as often as TheBoy? Then you need tunnie's towing services, recovery costs are just the humiliation of being towed by 2/3's of an engine IP Logged

VXL V6 Omega Lord Offline Posts: 5306 Gender:	Re: multiplug connector.. Reply #2 - 21. May 2009 at 20:21 Does it need to be plugged? Personally i'd solder and shrink tube it if it doesn't need to be disconnected, far better quality join.
Back to top	Opelscanner SP V6 Cam Lock VX Trade Card IP Logged

tunnie

Over Active Poster

Offline

Posts: 22520
London, W3
Gender: male

Drives: 2.2 CD (LPG'd) & BMW R1200 GS

Re: multiplug connector..
Reply #3 - 21. May 2009 at 20:25

VXL V6 wrote on 21. May 2009 at 20:21:

Does it need to be plugged? Personally i'd solder and shrink tube it if it doesn't need to be disconnected, far better quality join.

No has to be plugged, as the whole rear light cluster has to come off to change bulbs.

Unless i make the wiring uber long to allow the cluster to be taken off

Back to top

Do you break V6's as often as TheBoy? Then you need tunnie's towing services, recovery costs are just the humiliation of being towed by 2/3's of an engine

IP Logged

Omegatoy Omega Baron Offline Posts: 3030 sunny spain!!! Drives: Omega TD chipped of course,	Re: multiplug connector.. Reply #4 - 21. May 2009 at 20:27 take a trip down the scrappy and cut off the ones you want both male and female!! or find someone breaking a motor ??
Back to top	http://showoffyourcar.com/galleries.asp?carid=1897 as was http://showoffyourcar.com/galleries.asp?carid=1263 http://uk.youtube.com/watch?v=8z2SMuv8GhA IP Logged

tunnie Over Active Poster Offline Posts: 22520 London, W3 Gender: Drives: 2.2 CD (LPG'd) & BMW R1200 GS	Re: multiplug connector.. Reply #5 - 21. May 2009 at 20:31 Omegatoy wrote on 21. May 2009 at 20:27: take a trip down the scrappy and cut off the ones you want both male and female!! or find someone breaking a motor ?? This is for the bike male/female leccy connectors for the rear light cluster are all corroded.
Back to top	Do you break V6's as often as TheBoy? Then you need tunnie's towing services, recovery costs are just the humiliation of being towed by 2/3's of an engine IP Logged

Mr Skrunts Over Active Poster Offline 3.O Elite Saloon with all the toys, Posts: 23830 Skruntie Land. Gender: Drives: Jimbob Mad It seems	Re: multiplug connector.. Reply #6 - 21. May 2009 at 20:38 There's a place that was based in nottingingham that moved to derby that does what you are after. They were called Merv ? something or other. Give it time someone will know the link, it has often been mentioned since.
Back to top	Ask yourself : " WHY do I believe what I believe?" Remember that my opinions expressed here are not representative of the opinions of other members on the OOF Forum. IP Logged

Mr Skrunts Over Active Poster Offline 3.O Elite Saloon with all the toys, Posts: 23830 Skruntie Land. Gender: Drives: Jimbob Mad It seems	Re: multiplug connector.. Reply #7 - 21. May 2009 at 20:41 http://www.omegaowners.com/forum/YaBB.pl?num=1207454056/0 here you go
Back to top	Ask yourself : " WHY do I believe what I believe?" Remember that my opinions expressed here are not representative of the opinions of other members on the OOF Forum. IP Logged

Mr Skrunts Over Active Poster Offline 3.O Elite Saloon with all the toys, Posts: 23830 Skruntie Land. Gender: Drives: Jimbob Mad It seems	Re: multiplug connector.. Reply #8 - 21. May 2009 at 20:44 Also consider CPC and RSS
Back to top	Ask yourself : " WHY do I believe what I believe?" Remember that my opinions expressed here are not representative of the opinions of other members on the OOF Forum. IP Logged

tunnie Over Active Poster Offline Posts: 22520 London, W3 Gender: Drives: 2.2 CD (LPG'd) & BMW R1200 GS	Re: multiplug connector.. Reply #9 - 21. May 2009 at 20:45 just having a think, i might extend the wiring, loop it up and tie it up underneath the light cluster. As long make it long enough to put the cluster on the ground next to the bike that should do the job, also will remove any more corrosion issues.
Back to top	Do you break V6's as often as TheBoy? Then you need tunnie's towing services, recovery costs are just the humiliation of being towed by 2/3's of an engine IP Logged

tunnie Over Active Poster Offline Posts: 22520 London, W3 Gender: Drives: 2.2 CD (LPG'd) & BMW R1200 GS	Re: multiplug connector.. Reply #10 - 21. May 2009 at 20:51 any ideas what kind of wire would be best to handle low voltage indicator bulbs? http://www.maplin.co.uk/Search.aspx?criteria=wire&source=15
Back to top	Do you break V6's as often as TheBoy? Then you need tunnie's towing services, recovery costs are just the humiliation of being towed by 2/3's of an engine IP Logged

Kevin Wood Global Moderator Admin Team Offline Posts: 20377 Alton, Hampshire Gender: Drives: 3.2 MV6 (LPG), Westfield	Re: multiplug connector.. Reply #11 - 21. May 2009 at 21:15 http://www.vehicle-wiring-products.eu/VWP-onlinestore/home/homepage.php Kevin
Back to top	Tech2 services currently available. See TheBoy's price list: http://theboy.omegaowners.com/ IP Logged

Vamps Omega King Offline Flying Tonight, so Be Prepared. Posts: 16571 Bishop Middleham, Co Durham. Gender: Drives: 2.0L Auto Estate & 2.2 CD Auto Saloon	Re: multiplug connector.. Reply #12 - 21. May 2009 at 21:26 You can actually buy terminal block that plugs together, bought some last year off ebay.....
Back to top	IMG]http://i275.photobucket.com/albums/jj284/floodm_photos/DSCF1767.jpg[/IMG] IP Logged

Martin Imber

Over Active Poster

Offline

LPG Omega V6 - Keyfobs
Rebuilt

Posts: 20110
Worcester
Gender: male

Drives: 2001 Omega 2.6CD LPG & 3.0 cams

Re: multiplug connector..
Reply #13 - 21. May 2009 at 21:53

tunnie wrote on 21. May 2009 at 20:31:

Omegatoy wrote on 21. May 2009 at 20:27:

take a trip down the scrappy and cut off the ones you want both male and female!! or find someone breaking a motor ?? Thumbs Up!

This is for the bike

male/female leccy connectors for the rear light cluster are all corroded.

RC model shop Tamaya or Kyosho connector - for 2 pin

Back to top

The other tuned 2.6. DIY LPG, towbar, upgrade ICE & Wing Spoiler, Air shocks, Eibach Pro Springs, Poly WB bushes, WIM setup, HID conversion, 3.0 cams, ported ect.

IP Logged

Nickbat Omega Lord Offline Posts: 7167 London NW7 Gender: Drives: 2002 2.6CD Auto	Re: multiplug connector.. Reply #14 - 21. May 2009 at 22:09 Tunnie, If you look at this PDF, there are Wurth waterproof multiplug connectors available (P/N 0964 555 10, see page 3): http://www.harpersraceshop.co.uk/cat5040.pdf Looking at the homepage, http://www.harpersraceshop.co.uk/, they have London branch. Nick
Back to top	« Last Edit: 21. May 2009 at 22:10 by Nickbat » I don't care to belong to a club that accepts people like me as members. Groucho Marx IP Logged

This is the old site. Please use the new site.

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

This is the old site. Please use the new site.

	Welcome, Guest. Please Login