This is the old site. Please use the new site.

26. Dec 2025 at 09:44

	Welcome, Guest. Please Login

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

Omega Owners Forum › Omega Help › Omega General Help › Front brake pads

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1

Send Topic

Print

Front brake pads (Read 153 times)

lou Junior Member Offline Always expect the unexpected Posts: 165 Romford Gender: Drives: Omega V6 2.5 cdx 1998	Front brake pads 02. Jun 2009 at 17:58 Perhaps this has been asked before but how do the pads fit into the caliper as one pad has a shim (metal plate on the back) but the other one has not. At the moment the one with the shim is on the piston side..opinions would be appreciated.
Back to top	IP Logged

JezInBrum Intermediate Member Offline Built for comfort not speed Posts: 324 Birmingham Gender: Drives: 1998 3.0 Elite Saloon Auto	Re: Front brake pads Reply #1 - 02. Jun 2009 at 18:31 As far as i know thta is the correct way round. Set i just fitted had them on all four. When replacing use copper slip as well as this helps reduce the chance of squealing brakes
Back to top	« Last Edit: 02. Jun 2009 at 18:32 by JezInBrum » IP Logged

Andy B Over Active Poster Offline Posts: 21988 Bury Lancs Gender: Drives: 1999 3.0 Elite auto/TDM	Re: Front brake pads Reply #2 - 02. Jun 2009 at 18:33 JezInBrum wrote on 02. Jun 2009 at 18:31: As far as i know thta is the correct way round. Set i just fitted had them on all four. When replacing use copper slip as well as this helps reduce the chance of squealing brakes ChrisGixer!!!!!
Back to top	« Last Edit: 02. Jun 2009 at 21:55 by Andy B » IP Logged

Page Index Toggle

Pages: 1

Send Topic

Print

‹ Previous Topic | Next Topic ›

This is the old site. Please use the new site.

Top of this page

Omega Owners Forum » Powered by YaBB 2.5 AE!
YaBB Forum Software © 2000-2010. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge