Omega Owners Forum - WANTED - Facelift wing, bumper and headlight

RobG Omega Lord Offline I might have a link, pic or part number for that Posts: 7968 Bristol Gender: Drives: 53 plate 2.2 CD auto	Re: WANTED - Facelift wing, bumper and headlight Reply #15 - 18. Jan 2010 at 11:22 Them as in pass. light & underlight trim? Yep, can`t see it being a problem
Back to top	TC Holder Maxscan GS500 OBDII code reader/EML resetter available.. IP Logged

fudy Junior Member Offline Posts: 145 manchester Gender: Drives: facelift 3.0 elite	Re: WANTED - Facelift wing, bumper and headlight Reply #16 - 18. Jan 2010 at 12:53 RobG wrote on 18. Jan 2010 at 11:22: Them as in pass. light & underlight trim? Yep, can`t see it being a problem pm sent
Back to top	IP Logged

fudy Junior Member Offline Posts: 145 manchester Gender: Drives: facelift 3.0 elite	Re: WANTED - Facelift wing, bumper and headlight Reply #17 - 19. Jan 2010 at 14:27 fudy wrote on 18. Jan 2010 at 12:53: RobG wrote on 18. Jan 2010 at 11:22: Them as in pass. light & underlight trim? Yep, can`t see it being a problem pm sent have you still got the headlight m8?
Back to top	IP Logged

RobG Omega Lord Offline I might have a link, pic or part number for that Posts: 7968 Bristol Gender: Drives: 53 plate 2.2 CD auto	Re: WANTED - Facelift wing, bumper and headlight Reply #18 - 19. Jan 2010 at 14:32 Yes mate. Was going to ring but been busy stripping head for another member. Headlight incl. all bulbs, ballast and level motor and trim under £60 posted
Back to top	TC Holder Maxscan GS500 OBDII code reader/EML resetter available.. IP Logged

fudy

Junior Member

Offline

Posts: 145
manchester
Gender: male

Drives: facelift 3.0 elite

Re: WANTED - Facelift wing, bumper and headlight
Reply #19 - 19. Jan 2010 at 17:19

RobG wrote on 19. Jan 2010 at 14:32:

Yes mate. Was going to ring but been busy stripping head for another member. Headlight incl. all bulbs, ballast and level motor and trim under £60 posted

sounds good to me m8 Thumbs Up!

could you get it to me before the weekend though. my brothers tolerance is running out! Im borrowing his car every day

Back to top

IP Logged

fudy

Junior Member

Offline

Posts: 145
manchester
Gender: male

Drives: facelift 3.0 elite

Re: WANTED - Facelift wing, bumper and headlight
Reply #20 - 19. Jan 2010 at 18:19

RobG wrote on 19. Jan 2010 at 14:32:

Yes mate. Was going to ring but been busy stripping head for another member. Headlight incl. all bulbs, ballast and level motor and trim under £60 posted

sounds good to me m8 Thumbs Up!

could you get it to me before the weekend though. my brothers tolerance is running out! Im borrowing his car every day

Back to top

IP Logged

RobG

Omega Lord

Offline

I might have a link, pic
or part number for that

Posts: 7968
Bristol
Gender: male

Drives: 53 plate 2.2 CD auto

Re: WANTED - Facelift wing, bumper and headlight
Reply #21 - 20. Jan 2010 at 16:39

fudy wrote on 19. Jan 2010 at 18:19:

RobG wrote on 19. Jan 2010 at 14:32:

Yes mate. Was going to ring but been busy stripping head for another member. Headlight incl. all bulbs, ballast and level motor and trim under £60 posted

sounds good to me m8 Thumbs Up!

could you get it to me before the weekend though. my brothers tolerance is running out! Im borrowing his car every day

Sent a PM yesterday

Back to top

TC Holder Maxscan GS500 OBDII code reader/EML resetter available..

IP Logged

fudy

Junior Member

Offline

Posts: 145
manchester
Gender: male

Drives: facelift 3.0 elite

Re: WANTED - Facelift wing, bumper and headlight
Reply #22 - 20. Jan 2010 at 18:48

RobG wrote on 20. Jan 2010 at 16:39:

fudy wrote on 19. Jan 2010 at 18:19:

RobG wrote on 19. Jan 2010 at 14:32:

Yes mate. Was going to ring but been busy stripping head for another member. Headlight incl. all bulbs, ballast and level motor and trim under £60 posted

sounds good to me m8 Thumbs Up!

could you get it to me before the weekend though. my brothers tolerance is running out! Im borrowing his car every day

Sent a PM yesterday

sorry m8 picked one up today, i never noticed the pm Sad

ended up costing me £68 as well Sad

Back to top

IP Logged

markomega25

Junior Member

Offline

Posts: 109
Morden, Surrey, A3 gateway
Gender: male

Drives: 2.5 Elite saloon in Blue 2000

Re: WANTED - Facelift wing, bumper and headlight
Reply #23 - 26. Jan 2010 at 18:42

I'm in a similar position to Fudy - need a drivers front wing for my Xreg facelift aster it had an argument with a post on Christmas Day - mines dark blue so guess its the Nocturno colour as well.

Interesting to hear that a pre face lift wing would fit/be the same. I found this place doing wings & paint service too:-

http://www.everycarpart.co.uk/

but they told me they only do pre-facelift wings. Will go back and ask them for a pre facelift but in my facelift colour and see if they can do that.

How easy is it to fit a wing? I know it's bolt on so hopefullly straight forward but do I need any sealing compound or such or is it a straight swap? Any tips on doing this welcome.

Back to top

IP Logged

RobG

Omega Lord

Offline

I might have a link, pic
or part number for that

Posts: 7968
Bristol
Gender: male

Drives: 53 plate 2.2 CD auto

Re: WANTED - Facelift wing, bumper and headlight
Reply #24 - 26. Jan 2010 at 19:21

markomega25 wrote on 26. Jan 2010 at 18:42:

I'm in a similar position to Fudy - need a drivers front wing for my Xreg facelift aster it had an argument with a post on Christmas Day - mines dark blue so guess its the Nocturno colour as well.

Interesting to hear that a pre face lift wing would fit/be the same. I found this place doing wings & paint service too:-

http://www.everycarpart.co.uk/

but they told me they only do pre-facelift wings. Will go back and ask them for a pre facelift but in my facelift colour and see if they can do that.

How easy is it to fit a wing? I know it's bolt on so hopefullly straight forward but do I need any sealing compound or such or is it a straight swap? Any tips on doing this welcome.

No compound. To fit it, reverse this, courtesy of Wellung666
It can be done without taking the front bumper off but it's tight.

2 torx screws attaching the arch liner to the front bumper need to come out, then the arch liner. 3 x 10mm bolts holding the black bumper retainer then the 2 x 10mm bolts behind that. Line of bolts across the top (8 IIRC and all 10mm). Then 2 x 10mm bolts behind the sill cover, 1 x 10mm bolt at the top hinge edge from the door side and 1 x 10mm bolt about halfway up the hinge edge from inside the wheel arch. And it's off

Back to top

TC Holder Maxscan GS500 OBDII code reader/EML resetter available..

IP Logged

Welung666

Omega Lord

Offline

Posts: 9768
West Midlands
Gender: male

Drives: 99 2.5 saloon Tractor

Re: WANTED - Facelift wing, bumper and headlight
Reply #25 - 26. Jan 2010 at 19:49

RobG wrote on 26. Jan 2010 at 19:21:

markomega25 wrote on 26. Jan 2010 at 18:42:

I'm in a similar position to Fudy - need a drivers front wing for my Xreg facelift aster it had an argument with a post on Christmas Day - mines dark blue so guess its the Nocturno colour as well.

Interesting to hear that a pre face lift wing would fit/be the same. I found this place doing wings & paint service too:-

http://www.everycarpart.co.uk/

but they told me they only do pre-facelift wings. Will go back and ask them for a pre facelift but in my facelift colour and see if they can do that.

How easy is it to fit a wing? I know it's bolt on so hopefullly straight forward but do I need any sealing compound or such or is it a straight swap? Any tips on doing this welcome.

No compound. To fit it, reverse this, courtesy of Wellung666
It can be done without taking the front bumper off but it's tight.

2 torx screws attaching the arch liner to the front bumper need to come out, then the arch liner. 3 x 10mm bolts holding the black bumper retainer then the 2 x 10mm bolts behind that. Line of bolts across the top (8 IIRC and all 10mm). Then 2 x 10mm bolts behind the sill cover, 1 x 10mm bolt at the top hinge edge from the door side and 1 x 10mm bolt about halfway up the hinge edge from inside the wheel arch. And it's off

I just scanned through that and thought to myself "that looks familiar", it was then I re-read it and noticed you'd copied it from me Grin

It's been a long day!

Back to top

« Last Edit: 26. Jan 2010 at 19:50 by Welung666 »

Vehicle Movements, MOT's, tints and Repairs - PM for details.

CLICK HERE for instructions - how to Paperclip/Pedal test your car

IP Logged

markomega25 Junior Member Offline Posts: 109 Morden, Surrey, A3 gateway Gender: Drives: 2.5 Elite saloon in Blue 2000	Re: WANTED - Facelift wing, bumper and headlight Reply #26 - 27. Jan 2010 at 22:49 Thanks RobG and Wellung666. The company have come back and said they can do that for me, £54 for the wing and £60 to paint it and £5.99 carriage. Bit pricey I guess compared to getting a second hand one and painting it myself, but I'm useless with spray can.
Back to top	IP Logged

RobG

Omega Lord

Offline

I might have a link, pic
or part number for that

Posts: 7968
Bristol
Gender: male

Drives: 53 plate 2.2 CD auto

Re: WANTED - Facelift wing, bumper and headlight
Reply #27 - 27. Jan 2010 at 22:55

markomega25 wrote on 27. Jan 2010 at 22:49:

Thanks RobG and Wellung666.

The company have come back and said they can do that for me, £54 for the wing and £60 to paint it and £5.99 carriage. Bit pricey I guess compared to getting a second hand one and painting it myself, but I'm useless with spray can.

Better to pay someone who can (excuse the pun)

Back to top

TC Holder Maxscan GS500 OBDII code reader/EML resetter available..

IP Logged

This is the old site. Please use the new site.

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

This is the old site. Please use the new site.

	Welcome, Guest. Please Login