Omega Owners Forum - two crank sensors which is for me?????

andy j cdx

Newbie

Offline

Posts: 15
liverpool kirkby
Gender: male

Drives: 2000 omega 2.5 cdx v6auto

two crank sensors which is for me?????
10. Feb 2010 at 17:46

hi everyone ,hope someone can put me right .a friend of mine has two crank sensors. no1 part no 9148306n fits engines y22xe....z22xe ...no2 part no 90540743n fits engines y26se....x30xe....y32se dont no which i should have of him am i right in thinking my car ,a 2000 2.5 cdx is engine no x25xe if so then which crank sensor of the above is the right one for my car any help clearing this up is v welcome thanks Thumbs Up!

Back to top

IP Logged

Entwood

Omega King

Offline

Quietly Confident

Posts: 13708
North Wiltshire
Gender: male

Drives: 3.2 Elite (with LPG)

Re: two crank sensors which is for me?????
Reply #1 - 10. Feb 2010 at 17:51

Neither !!!!

2.2/2.6/3.2 will NOT fit the 2.5 !!! there are many crank sensors .. and you MUST have the right one

2.0 8v                                  90493864 £59.50 £53.56 £46.32

2.0 16v to 14194716                               90458251 £59.50 £53.56 £46.32

2.0 16v from 14194717/31000001                            9174621 £35.90 £32.36 £27.93

2.5 (early models)                               90492006 £82.00 £73.80 £63.94

2.5 (later models)                               90492061 £59.50 £53.56 £46.32

2.6/3.0/3.2                               90540743 £53.50 £48.20 £41.47

2.0DTi/2.2DTi                               90540188 £37.00 £33.30 £28.81

U25TD/X25TD                               90487810 £85.50 £76.95 £66.79

You need to find out which of the 2.5 versions you have ... the difference is in the electrical plug at the top end under the scuttle

Back to top

« Last Edit: 10. Feb 2010 at 17:53 by Entwood »

V6 Cam locking/setting kit, Maxscan GS500 OBDII code reader/EML resetter available. Click for some Pictures

IP Logged

ians Omega Baron Offline Posts: 3452 Reading Drives: '02 3.2 est, '98 3.0 Elite sal	Re: two crank sensors which is for me????? Reply #2 - 10. Feb 2010 at 17:58 Does that imply the 3L ones are all the same then? ie 90540743
Back to top	IP Logged

Entwood Omega King Offline Quietly Confident Posts: 13708 North Wiltshire Gender: Drives: 3.2 Elite (with LPG)	Re: two crank sensors which is for me????? Reply #3 - 10. Feb 2010 at 18:00 ians wrote on 10. Feb 2010 at 17:58: Does that imply the 3L ones are all the same then? ie 90540743 As far as I know ... yup ..
Back to top	V6 Cam locking/setting kit, Maxscan GS500 OBDII code reader/EML resetter available. Click for some Pictures IP Logged

biggriffin Intermediate Member Offline Posts: 302 cambs Drives: big n white.	Re: two crank sensors which is for me????? Reply #4 - 10. Feb 2010 at 21:05 theres two crank sensors for the V6. its simples oval plug or square plug. early cars normally sq plug up to bout 1997 then its oval plug 1998 on.
Back to top	if it aint broke dont fix it! IP Logged

Entwood

Omega King

Offline

Quietly Confident

Posts: 13708
North Wiltshire
Gender: male

Drives: 3.2 Elite (with LPG)

Re: two crank sensors which is for me?????
Reply #5 - 10. Feb 2010 at 21:08

biggriffin wrote on 10. Feb 2010 at 21:05:

theres two crank sensors for the V6.
its simples oval plug or square plug.
early cars normally sq plug up to bout 1997 then its oval plug 1998 on.

sort of correct ....

but only if you also add ... 2.5 V6

the sensor for the 2.6/3.0/3.2 V6 engines will NOT fit the 2.5 ...

Back to top

V6 Cam locking/setting kit, Maxscan GS500 OBDII code reader/EML resetter available. Click for some Pictures

IP Logged

biggriffin Intermediate Member Offline Posts: 302 cambs Drives: big n white.	Re: two crank sensors which is for me????? Reply #6 - 10. Feb 2010 at 21:31 the last engine swap i did was a 3.0l into a 2.5l the crank sensors were the same 1998 mini face lift oval plug.
Back to top	if it aint broke dont fix it! IP Logged

dbug

Omega Lord

Offline

Dont knock Linux!

Posts: 7822
Northants
Gender: male

Drives: 98 V6 Elite auto

Re: two crank sensors which is for me?????
Reply #7 - 11. Feb 2010 at 01:30

andy j cdx wrote on 10. Feb 2010 at 17:46:

hi everyone ,hope someone can put me right .a friend of mine has two crank sensors. no1 part no 9148306n fits engines y22xe....z22xe ...no2 part no 90540743n fits engines y26se....x30xe....y32se dont no which i should have of him am i right in thinking my car ,a 2000 2.5 cdx is engine no x25xe if so then which crank sensor of the above is the right one for my car any help clearing this up is v welcome thanks Thumbs Up!

Yours will be 90492061 - thats an oval plug one and if you look underneath by the oil filter you should see black plastic end.

Back to top

1998 Elite 2.5V6 Auto, 1967 Triumph TR4A, 1998 Elite 2.5V6 Auto Estate

IP Logged

tigers_gonads Omega Knight Offline can't spell, don't care !! Posts: 1450 hull Gender: Drives: omega 3.0 v6 cd manual estate	Re: two crank sensors which is for me????? Reply #8 - 11. Feb 2010 at 11:34 biggriffin wrote on 10. Feb 2010 at 21:31: the last engine swap i did was a 3.0l into a 2.5l the crank sensors were the same 1998 mini face lift oval plug. pulled a known good one of my old 2.5 and fitted it onto my 3.0 ( both oval plugs )
Back to top	IP Logged

This is the old site. Please use the new site.

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

This is the old site. Please use the new site.

	Welcome, Guest. Please Login