This is the old site. Please use the new site.

24. Dec 2025 at 16:07

	Welcome, Guest. Please Login

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

Omega Owners Forum › Omega Help › Omega General Help › where the hell is it ??!!??

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1

Send Topic

Print

where the hell is it ??!!?? (Read 447 times)

puffa Intermediate Member Offline Posts: 264 Southampton, UK Gender: Drives: 2002, 3.2 Elite, pearlesent Black Metallic	where the hell is it ??!!?? 20. Feb 2010 at 09:01 ok I have fault code 0115 and am trying to find the coolant temprature sensor i believe it is to the rear of the engine but not sure what i am looking for, can anyone point me in the right direction, are the any photos to show its location. Cheers Steve
Back to top	Previously owned 2.5 v6 Reflection IP Logged

tunnie Over Active Poster Offline Posts: 22520 London, W3 Gender: Drives: 2.2 CD (LPG'd) & BMW R1200 GS	Re: where the hell is it ??!!?? Reply #1 - 20. Feb 2010 at 09:05 its on the coolant bridge, at the back of the V
Back to top	Do you break V6's as often as TheBoy? Then you need tunnie's towing services, recovery costs are just the humiliation of being towed by 2/3's of an engine IP Logged

puffa Intermediate Member Offline Posts: 264 Southampton, UK Gender: Drives: 2002, 3.2 Elite, pearlesent Black Metallic	Re: where the hell is it ??!!?? Reply #2 - 20. Feb 2010 at 09:07 is it easy to get to or do i have to remove stuff to get to it ???
Back to top	Previously owned 2.5 v6 Reflection IP Logged

biggriffin Intermediate Member Offline Posts: 302 cambs Drives: big n white.	Re: where the hell is it ??!!?? Reply #3 - 20. Feb 2010 at 09:08 its the one at the back of the valley on top of the coolent bridge with the big plug on. The one with the spade connector is the temp gauge.
Back to top	if it aint broke dont fix it! IP Logged

tunnie Over Active Poster Offline Posts: 22520 London, W3 Gender: Drives: 2.2 CD (LPG'd) & BMW R1200 GS	Re: where the hell is it ??!!?? Reply #4 - 20. Feb 2010 at 09:09 plenum off for sure, might as well take injection manifold off as well, to give good access
Back to top	Do you break V6's as often as TheBoy? Then you need tunnie's towing services, recovery costs are just the humiliation of being towed by 2/3's of an engine IP Logged

puffa Intermediate Member Offline Posts: 264 Southampton, UK Gender: Drives: 2002, 3.2 Elite, pearlesent Black Metallic	Re: where the hell is it ??!!?? Reply #5 - 20. Feb 2010 at 09:12 could code 0115 be caused by the coolant sensor being fautly ??
Back to top	Previously owned 2.5 v6 Reflection IP Logged

biggriffin Intermediate Member Offline Posts: 302 cambs Drives: big n white.	Re: where the hell is it ??!!?? Reply #6 - 20. Feb 2010 at 09:17 it might just be lose and need a push back on but its a plenum of job.
Back to top	if it aint broke dont fix it! IP Logged

puffa Intermediate Member Offline Posts: 264 Southampton, UK Gender: Drives: 2002, 3.2 Elite, pearlesent Black Metallic	Re: where the hell is it ??!!?? Reply #7 - 20. Feb 2010 at 09:25 ok sounds like a job to add to the cam covers and breathers job in the next few weeks !!!
Back to top	Previously owned 2.5 v6 Reflection IP Logged

biggriffin Intermediate Member Offline Posts: 302 cambs Drives: big n white.	Re: where the hell is it ??!!?? Reply #8 - 20. Feb 2010 at 09:40 would be the best way to do it as your going to do cam covers. that makes it easy.
Back to top	if it aint broke dont fix it! IP Logged

Page Index Toggle

Pages: 1

Send Topic

Print

‹ Previous Topic | Next Topic ›

This is the old site. Please use the new site.

Top of this page

Omega Owners Forum » Powered by YaBB 2.5 AE!
YaBB Forum Software © 2000-2010. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge