Omega Owners Forum - Hello, do you sell Polyflex?

tunnie

Over Active Poster

Offline

Posts: 22520
London, W3
Gender: male

Drives: 2.2 CD (LPG'd) & BMW R1200 GS

Hello, do you sell Polyflex?
22. Mar 2010 at 18:37

Was my opening question to these people:

http://www.oxfordautogas.com/index.html

Response? - 'Errr i don't know'

Hopefully going to get started on LPG this week, was going to use them as they are on route to KevinW's

Anyone else know good LPG supplier in Oxon, Hampshire?

LD - Still waiting for call from Telio, just getting some backups just in case

Back to top

Do you break V6's as often as TheBoy? Then you need tunnie's towing services, recovery costs are just the humiliation of being towed by 2/3's of an engine

IP Logged

Lazydocker

Omega King

Offline

Victim of Pinky's Power
Trip!

Posts: 11336
Woodbridge, Suffolk
Gender: male

Drives: 2003 3.2 Elite Estate LPG Converted, inspected and Certified

Re: Hello, do you sell Polyflex?
Reply #1 - 22. Mar 2010 at 18:39

tunnie wrote on 22. Mar 2010 at 18:37:

Was my opening question to these people:

http://www.oxfordautogas.com/index.html

Response? - 'Errr i don't know'

Hopefully going to get started on LPG this week, was going to use them as they are on route to KevinW's

Anyone else know good LPG supplier in Oxon, Hampshire?

LD - Still waiting for call from Telio, just getting some backups just in case

He did say he's very busy so may be late call... Thumbs Up!

Back to top

Whatever it is... I didn't do it

IP Logged

tunnie

Over Active Poster

Offline

Posts: 22520
London, W3
Gender: male

Drives: 2.2 CD (LPG'd) & BMW R1200 GS

Re: Hello, do you sell Polyflex?
Reply #2 - 22. Mar 2010 at 18:46

Lazydocker wrote on 22. Mar 2010 at 18:39:

tunnie wrote on 22. Mar 2010 at 18:37:

Was my opening question to these people:

http://www.oxfordautogas.com/index.html

Response? - 'Errr i don't know'

Hopefully going to get started on LPG this week, was going to use them as they are on route to KevinW's

Anyone else know good LPG supplier in Oxon, Hampshire?

LD - Still waiting for call from Telio, just getting some backups just in case

He did say he's very busy so may be late call... Thumbs Up!

Ta

Back to top

Do you break V6's as often as TheBoy? Then you need tunnie's towing services, recovery costs are just the humiliation of being towed by 2/3's of an engine

IP Logged

Lazydocker Omega King Offline Victim of Pinky's Power Trip! Posts: 11336 Woodbridge, Suffolk Gender: Drives: 2003 3.2 Elite Estate LPG Converted, inspected and Certified	Re: Hello, do you sell Polyflex? Reply #3 - 22. Mar 2010 at 18:53 He may even call tomorrow... If you haven't heard by about half 3 tomorrow give me a call at home (assuming you can't get him) and I'll chase him
Back to top	Whatever it is... I didn't do it IP Logged

tunnie Over Active Poster Offline Posts: 22520 London, W3 Gender: Drives: 2.2 CD (LPG'd) & BMW R1200 GS	Re: Hello, do you sell Polyflex? Reply #4 - 22. Mar 2010 at 18:58 cheers, btw, with the straight filler i have, would that be ok if it was mounted on the body work, rather than bumper? Just thinking of what jobs we can do before you get here to save time
Back to top	Do you break V6's as often as TheBoy? Then you need tunnie's towing services, recovery costs are just the humiliation of being towed by 2/3's of an engine IP Logged

Lazydocker

Omega King

Offline

Victim of Pinky's Power
Trip!

Posts: 11336
Woodbridge, Suffolk
Gender: male

Drives: 2003 3.2 Elite Estate LPG Converted, inspected and Certified

Re: Hello, do you sell Polyflex?
Reply #5 - 22. Mar 2010 at 20:35

tunnie wrote on 22. Mar 2010 at 18:58:

cheers, btw, with the straight filler i have, would that be ok if it was mounted on the body work, rather than bumper? Just thinking of what jobs we can do before you get here to save time Thumbs Up!

If you can get the tank fitted and all tightened up to the frame/floor and decide where you want things mounting, that will save us about half a day. You could also mark up for the filler and, once you're home, remove the bumper if you like. I would be a little concerned to cut a metal body panel with that type of cutter, regardless of what they say!

Fitting the tank is, ideally, a 2 man job and measuring is time consuming! Once it's fitted 2 people can do separate jobs and it makes it quite quick! We'll get it done, assuming we have everything and don't hit any snags.

Back to top

Whatever it is... I didn't do it

IP Logged

tunnie

Over Active Poster

Offline

Posts: 22520
London, W3
Gender: male

Drives: 2.2 CD (LPG'd) & BMW R1200 GS

Re: Hello, do you sell Polyflex?
Reply #6 - 22. Mar 2010 at 20:47

Lazydocker wrote on 22. Mar 2010 at 20:35:

tunnie wrote on 22. Mar 2010 at 18:58:

cheers, btw, with the straight filler i have, would that be ok if it was mounted on the body work, rather than bumper? Just thinking of what jobs we can do before you get here to save time Thumbs Up!

If you can get the tank fitted and all tightened up to the frame/floor and decide where you want things mounting, that will save us about half a day. You could also mark up for the filler and, once you're home, remove the bumper if you like. I would be a little concerned to cut a metal body panel with that type of cutter, regardless of what they say!

Fitting the tank is, ideally, a 2 man job and measuring is time consuming! Once it's fitted 2 people can do separate jobs and it makes it quite quick! We'll get it done, assuming we have everything and don't hit any snags.

Same here!

Got next week off as well, so no biggie if its not all done. Thumbs Up!

Back to top

Do you break V6's as often as TheBoy? Then you need tunnie's towing services, recovery costs are just the humiliation of being towed by 2/3's of an engine

IP Logged

Entwood Omega King Offline Quietly Confident Posts: 13708 North Wiltshire Gender: Drives: 3.2 Elite (with LPG)	Re: Hello, do you sell Polyflex? Reply #7 - 22. Mar 2010 at 20:47 <cheap shot warning> Have you checked for space on Marks drive BEFORE you start this conversion ??? Do you have a "library tape" of odd noises for comparison purposes ?? Has the cam belt been checked ? <end cheap shot>
Back to top	V6 Cam locking/setting kit, Maxscan GS500 OBDII code reader/EML resetter available. Click for some Pictures IP Logged

Guffer Omega Lord Offline Music to watch girls by.... Posts: 6142 Hampshire Gender: Drives: R Reg 2.5V6 Omega ELITE & P reg Omega 2.5 V6 CDX	Re: Hello, do you sell Polyflex? Reply #8 - 23. Mar 2010 at 09:39 Entwood wrote on 22. Mar 2010 at 20:47: <cheap shot warning> Have you checked for space on Marks drive BEFORE you start this conversion ??? Do you have a "library tape" of odd noises for comparison purposes ?? Has the cam belt been checked ? <end cheap shot> oooooooooooooo Entwood's postcount = 10319
Back to top	« Last Edit: 23. Mar 2010 at 09:43 by Guffer » RIP Lisa, you will be missed IP Logged

Guffer Omega Lord Offline Music to watch girls by.... Posts: 6142 Hampshire Gender: Drives: R Reg 2.5V6 Omega ELITE & P reg Omega 2.5 V6 CDX	Re: Hello, do you sell Polyflex? Reply #9 - 23. Mar 2010 at 09:41 Back on subject, have you thought about silkaflex? Used a lot in the sailing world for it's durability although it needs some gentle heating up to make it more maliable during application.
Back to top	RIP Lisa, you will be missed IP Logged

tunnie

Over Active Poster

Offline

Posts: 22520
London, W3
Gender: male

Drives: 2.2 CD (LPG'd) & BMW R1200 GS

Re: Hello, do you sell Polyflex?
Reply #10 - 23. Mar 2010 at 10:20

Guffer wrote on 23. Mar 2010 at 09:41:

Back on subject, have you thought about silkaflex? Used a lot in the sailing world for it's durability although it needs some gentle heating up to make it more maliable during application.

Not thought about any sealants, do you mean to seal the holes for the filter and into the tank?

Back to top

Do you break V6's as often as TheBoy? Then you need tunnie's towing services, recovery costs are just the humiliation of being towed by 2/3's of an engine

IP Logged

This is the old site. Please use the new site.

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

This is the old site. Please use the new site.

	Welcome, Guest. Please Login