28. Jun 2026 at 15:09

	Welcome, Guest. Please Login

Shop

Help

Members

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

Omega Owners Forum › For Sale › Car Parts, bits For Sale & Wanted › urgently needed

‹ Previous Topic | Next Topic ›

Pages: 1

urgently needed (Read 792 times)

erubus

Junior Member

Offline

Posts: 149
blairgowrie

Drives: omega 2.0 cdx and landrover series III

urgently needed
05. Sep 2010 at 11:06

Hi there guys. As i can't post in the wanted section I'm gonna have to post here. I desperatly need a brake servo pipe for my 2 litre omega. Can anyone help me out? This is the last thing i have to try to get my omega running before it ends up going to the scrappies (as with every omega i've had, will be before it's even paid for) failing that it'll need a new engine, but as that's well outside my budget (taking a big wage cut from next week) this is kinda the last chance saloon.

I pulled the existing servo pipe out and blocked the hole with my finger and it ran much better. still not perfect but it's at least a start, seemed like it would at least be useable and mot-able

cheers gill

IP Logged

Jimbob Global Moderator Admin Team Offline Third nipple removal completed succesfuly Posts: 20462 Chester / Flintshire Gender: Drives: 52 3.2 MV6 Estate & 98 3.0 MV6 Manual Estate	Re: urgently needed Reply #1 - 05. Sep 2010 at 18:25 *This Topic was moved here from Omega General Help* by Jimbob.**
Back to top	Maintenance Guides & Code Reading FAQ & Common Questions IP Logged

sjc Intermediate Member Offline Posts: 321 Alloa, Scotland Gender: Drives: 3.0L Manual Elite, 2 x 3.0L MV6 Auto	Re: urgently needed Reply #2 - 06. Sep 2010 at 13:56 Is one off a 3L any good? Got one here - I would imagine they're all the same.
Back to top	IP Logged

erubus Junior Member Offline Posts: 149 blairgowrie Drives: omega 2.0 cdx and landrover series III	Re: urgently needed Reply #3 - 06. Sep 2010 at 23:56 cheers for the offer but i don't think one off a v6 would fit. it's a pretty rigid pipe so would need to be the right one, although if it connects to the drivers side manifold it might just connect...
Back to top	IP Logged

Brikhead Senior Member Offline Sleeping. Do not disturb. Posts: 940 West-Mids. Gender: Drives: Rusty bag of $h!t.	Re: urgently needed Reply #4 - 07. Sep 2010 at 00:31 Can you see any part number on the pipe? Then you and SJC can compare the items...
Back to top	IP Logged

sjc

Intermediate Member

Offline

Posts: 321
Alloa, Scotland
Gender: male

Drives: 3.0L Manual Elite, 2 x 3.0L MV6 Auto

Re: urgently needed
Reply #5 - 07. Sep 2010 at 07:29

erubus wrote on 06. Sep 2010 at 23:56:

cheers for the offer but i don't think one off a v6 would fit. it's a pretty rigid pipe so would need to be the right one, although if it connects to the drivers side manifold it might just connect...

Ah, sorry. I misread you post and thought it was the servo unit you were after not the pipe. And you're right, it defo won't fit.

IP Logged

erubus Junior Member Offline Posts: 149 blairgowrie Drives: omega 2.0 cdx and landrover series III	Re: urgently needed Reply #6 - 08. Sep 2010 at 23:34 no problem. thanks anyway. While i'm at it, I would also consider buying a complete X20XEV engine if it was close enough. might be easier than trying to get to the bottom of this one's problems!
Back to top	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

This is the old site. Please use the new site.

« Home

‹ Board

Top of this page