29. Jun 2026 at 13:18

	Welcome, Guest. Please Login

Shop

Help

Members

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

Omega Owners Forum › For Sale › Car Parts, bits For Sale & Wanted › Wanted - ABS ECU for 3.0 manual

‹ Previous Topic | Next Topic ›

Pages: 1

Wanted - ABS ECU for 3.0 manual (Read 631 times)

Dan-P Newbie Offline Posts: 12 Shropshire Gender: Drives: 2001 3.0 MV6 Estate manual ex police	Wanted - ABS ECU for 3.0 manual 10. Oct 2010 at 14:33 I'm after an ABS ECU in good working order to fit a Y reg 3.0 manual facelift. Can pay by PayPal if easier. Cheers, Dan.
Back to top	IP Logged

Jimbob Global Moderator Admin Team Offline Third nipple removal completed succesfuly Posts: 20462 Chester / Flintshire Gender: Drives: 52 3.2 MV6 Estate & 98 3.0 MV6 Manual Estate	Re: Wanted - ABS ECU for 3.0 manual Reply #1 - 10. Oct 2010 at 15:50 *This Topic was moved here from Test Zone* by Jimbob.**
Back to top	Maintenance Guides & Code Reading FAQ & Common Questions IP Logged

vauxfan2k Omega Baron Offline Posts: 2092 Western Isles Gender: Drives: 2.5V6 saloon- Magic Grey	Re: Wanted - ABS ECU for 3.0 manual Reply #2 - 10. Oct 2010 at 20:30 can you post up the numbers of your unit as it has to be the same type, there are a few variations. cheers
Back to top	IP Logged

Dan-P Newbie Offline Posts: 12 Shropshire Gender: Drives: 2001 3.0 MV6 Estate manual ex police	Re: Wanted - ABS ECU for 3.0 manual Reply #3 - 10. Oct 2010 at 21:21 Im not sure on the numbers, am i right in thinking these cannot be seen until the unit is removed? Or is it possible to view from anywhere while still fitted? If not is there any way to work out which is the correct part number
Back to top	IP Logged

sjc

Intermediate Member

Offline

Posts: 321
Alloa, Scotland
Gender: male

Drives: 3.0L Manual Elite, 2 x 3.0L MV6 Auto

Re: Wanted - ABS ECU for 3.0 manual
Reply #4 - 12. Oct 2010 at 20:06

You need to remove the control unit box as the part number is underneath - clever, eh?

Only a few torx bolts though - remove the ones you can see holding the cover down, remove the cover, and pull off the wiring connectors and lastly, remove the torx screw marked "+". Should now lift off.

BTW, I only have a very early one and that certainly won't be what your after.

« Last Edit: 12. Oct 2010 at 20:07 by sjc »

IP Logged

scimmy_man Intermediate Member Offline Posts: 395 yorkshire Gender: Drives: mv6 scimitar A3 discovery	Re: Wanted - ABS ECU for 3.0 manual Reply #5 - 16. Oct 2010 at 16:47 I have one off a 99 mv6 if any good? still on the car so dont know the number.
Back to top	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

This is the old site. Please use the new site.

« Home

‹ Board

Top of this page