This is the old site. Please use the new site.

 
29. Jun 2026 at 11:58
  
  Welcome, Guest. Please Login
 Omega Owners Forum
 
 
  Home Shop Help Search Members Login  
 

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

 
  Omega Owners Forum › For Sale › Car Parts, bits For Sale & Wanted › 97 2.5v6 engine loom needed
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1
Send Topic Print
97 2.5v6 engine loom needed (Read 556 times)
vauxfan2k
Omega Baron
******
Offline



Posts: 2092
Western Isles
Gender: male

Drives: 2.5V6 saloon- Magic Grey
97 2.5v6 engine loom needed
13. Oct 2010 at 19:13  
As above, to fit a 97 model v6, maybe 3.0 is same not sure, I have a 95 loom spare but the sensor connections are different for the cam sensors, dont want to butcher connections so a complete loom would be nice. not sure if it makes any odds but needs to be for a manual.



thanks  Smiley
Back to top
« Last Edit: 13. Oct 2010 at 19:14 by vauxfan2k »  
 
IP Logged
 
Brikhead
Senior Member
****
Offline


Sleeping. Do not disturb.

Posts: 940
West-Mids.
Gender: male

Drives: Rusty bag of $h!t.
Re: 97 2.5v6 engine loom needed
Reply #1 - 13. Oct 2010 at 22:14  
I have one from a '99 3.0 auto.
Usually the looms have a sticker attached with a partnumber printed on them, I'll have a look...
http://www.omegaowners.com/forum/YaBB.pl?num=1286275283
Back to top
 
 
IP Logged
 
2woody
Omega Knight
*****
Offline



Posts: 1402
Northumberland

Drives: '02 MV6,           '99 Elite, '99 MV6 estate, '92 Evo 500, Commodore SS
Re: 97 2.5v6 engine loom needed
Reply #2 - 14. Oct 2010 at 12:50  
how about just changing the sensors instead ? it might be easier
Back to top
 
 
IP Logged
 
vauxfan2k
Omega Baron
******
Offline



Posts: 2092
Western Isles
Gender: male

Drives: 2.5V6 saloon- Magic Grey
Re: 97 2.5v6 engine loom needed
Reply #3 - 14. Oct 2010 at 13:04  
either way id have to change the loom and its easier to change just the loom than the loom AND the sensors.

this way Im certain it will work, its all basically down to a damaged loom connector to the main harness, got wrecked when the previous owner swapped out the engine.
Back to top
 
 
IP Logged
 
Brikhead
Senior Member
****
Offline


Sleeping. Do not disturb.

Posts: 940
West-Mids.
Gender: male

Drives: Rusty bag of $h!t.
Re: 97 2.5v6 engine loom needed
Reply #4 - 14. Oct 2010 at 20:33  
It looks like you will need one from a manual vehicle (90566288), the p no. on mine is 90566289.

If you want mine just to butcher the connections then I'll knock a third off the asking price...
Back to top
 
 
IP Logged
 
vauxfan2k
Omega Baron
******
Offline



Posts: 2092
Western Isles
Gender: male

Drives: 2.5V6 saloon- Magic Grey
Re: 97 2.5v6 engine loom needed
Reply #5 - 14. Oct 2010 at 20:44  
Thanks, found a manual one thanks to a fellow member.

cheers guys  Wink
Back to top
 
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print
‹ Previous Topic | Next Topic ›

This is the old site. Please use the new site.

  « Home ‹ Board Top of this page

Omega Owners Forum » Powered by YaBB 2.5 AE!
YaBB Forum Software © 2000-2010. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge