This is the old site. Please use the new site.

  Welcome, Guest. Please Login
Omega Owners Forum
 
  Home Shop Help Search Members Login  
 

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

 
Pages: 1 2 
Send Topic Print
please help 2.2 auto service (Read 777 times)
pjd
Newbie
*
Offline



Posts: 12
eastbourne
Gender: male

Drives: 2000 2.2cd auto
please help 2.2 auto service
06. Nov 2010 at 18:32
 
i have just bought a 2.2cd auto and done most of the service including coolant but cannot see how to drain and refill the auto fluid , car started to lose gear in fourth and go into manual mode if i stop and restart the car if works fine
Back to top
 
 
IP Logged
 
TheBoy
Administrator
****************
Offline


TBE has an MOT!

Posts: 64817
Brackley, Northants
Gender: male

Drives: 98 MV6, 03 Elite, 00 25, 89 ZX10
Re: please help 2.2 auto service
Reply #1 - 06. Nov 2010 at 18:34
 
Supposedly sealed for life, but in reality needs doing every 70-80k

I believe there is a guide in Maintenence Guides, but basically its taking off the autobox sumps.
Back to top
 

If you are going to kick a car, remember to wear appropriate footwear
Any posts are the result of my own views as a member of OOF, which may or may not be the same as my views as part of the Admin Team.
WWW  
IP Logged
 
pjd
Newbie
*
Offline



Posts: 12
eastbourne
Gender: male

Drives: 2000 2.2cd auto
Re: please help 2.2 auto service
Reply #2 - 06. Nov 2010 at 18:55
 
can you tell if the coolant system only having water in it and maybe very old antifreeze would kill the autobox oil has built in oil cooler on the rad
Back to top
 
 
IP Logged
 
RobG
Omega Lord
*******
Offline


I might have a link, pic
or part number for that

Posts: 7968
Bristol
Gender: male

Drives: 53 plate 2.2 CD auto
Re: please help 2.2 auto service
Reply #3 - 06. Nov 2010 at 18:55
 
Will kill your headgasket
Back to top
 

TC Holder Maxscan GS500 OBDII code reader/EML resetter available..
 
IP Logged
 
fed up
Newbie
*
Offline



Posts: 10

Drives: 2.2 Omega cd
Re: please help 2.2 auto service
Reply #4 - 06. Nov 2010 at 19:03
 
Hi, I have the same car. I've had so much trouble with limp mode etc but sorted it by buying a code reader and understanding the problem. In short the gearbox is sealed but I drained it of oil from the drain plug 13 mm spanner. I then undone the sump gave it all clean up. But I found you cannot top up all in one go. I get as much oil as I can in, without it all pouring out again. I then tighten up the plug start the engine slowly drive half a mile and repeat the process until I match the oil volume Ive taken out. However if you have a preasured pump this may work better. That's how I changed my gearbox oil, and I get smoother changes now.
Back to top
 
 
IP Logged
 
pjd
Newbie
*
Offline



Posts: 12
eastbourne
Gender: male

Drives: 2000 2.2cd auto
Re: please help 2.2 auto service
Reply #5 - 06. Nov 2010 at 19:07
 
cheers will be my job on suday where is the drain plug
Back to top
 
 
IP Logged
 
RobG
Omega Lord
*******
Offline


I might have a link, pic
or part number for that

Posts: 7968
Bristol
Gender: male

Drives: 53 plate 2.2 CD auto
Re: please help 2.2 auto service
Reply #6 - 06. Nov 2010 at 19:09
 
Driver`s side of box,
Back to top
 

TC Holder Maxscan GS500 OBDII code reader/EML resetter available..
 
IP Logged
 
RobG
Omega Lord
*******
Offline


I might have a link, pic
or part number for that

Posts: 7968
Bristol
Gender: male

Drives: 53 plate 2.2 CD auto
Re: please help 2.2 auto service
Reply #7 - 06. Nov 2010 at 19:11
 
Here`s how to check level correctly once you`ve drained it and re-filled. http://www.omegaowners.com/forum/YaBB.pl?num=1152783586
Back to top
 

TC Holder Maxscan GS500 OBDII code reader/EML resetter available..
 
IP Logged
 
pjd
Newbie
*
Offline



Posts: 12
eastbourne
Gender: male

Drives: 2000 2.2cd auto
Re: please help 2.2 auto service
Reply #8 - 06. Nov 2010 at 19:12
 
cheers looking forward to it the last owner didnt do much to her
Back to top
 
 
IP Logged
 
RobG
Omega Lord
*******
Offline


I might have a link, pic
or part number for that

Posts: 7968
Bristol
Gender: male

Drives: 53 plate 2.2 CD auto
Re: please help 2.2 auto service
Reply #9 - 06. Nov 2010 at 19:14
 
For peace of mind I`d do a coolant flush & change as well
http://www.omegaowners.com/forum/YaBB.pl?num=1167917774
Back to top
 

TC Holder Maxscan GS500 OBDII code reader/EML resetter available..
 
IP Logged
 
arthill
Junior Member
**
Offline


HI all pleased to join
Forum

Posts: 158
Greenock
Gender: male

Drives: 2002 omega 2.2
Re: please help 2.2 auto service
Reply #10 - 06. Nov 2010 at 19:20
 
RobG wrote on 06. Nov 2010 at 19:14:
For peace of mind I`d do a coolant flush & change as well
http://www.omegaowners.com/forum/YaBB.pl?num=1167917774


preferably with proper coolant not water


John
Back to top
 

John
 
IP Logged
 
pjd
Newbie
*
Offline



Posts: 12
eastbourne
Gender: male

Drives: 2000 2.2cd auto
Re: please help 2.2 auto service
Reply #11 - 06. Nov 2010 at 20:08
 
thats brill i did the coolant change and flush do you know how much oil the auto takes
Back to top
 
 
IP Logged
 
RobG
Omega Lord
*******
Offline


I might have a link, pic
or part number for that

Posts: 7968
Bristol
Gender: male

Drives: 53 plate 2.2 CD auto
Re: please help 2.2 auto service
Reply #12 - 06. Nov 2010 at 20:11
 
With the sumps off to empty (you`ll still have some in the T/C) app. 6 ltrs IIRC
Back to top
« Last Edit: 06. Nov 2010 at 20:15 by RobG »  

TC Holder Maxscan GS500 OBDII code reader/EML resetter available..
 
IP Logged
 
pjd
Newbie
*
Offline



Posts: 12
eastbourne
Gender: male

Drives: 2000 2.2cd auto
Re: please help 2.2 auto service
Reply #13 - 06. Nov 2010 at 20:17
 
cheers  im grald i found this site very helpfull
thanks  Cheesy
Back to top
 
 
IP Logged
 
pjd
Newbie
*
Offline



Posts: 12
eastbourne
Gender: male

Drives: 2000 2.2cd auto
Re: please help 2.2 auto service
Reply #14 - 14. Nov 2010 at 21:57
 
hi just an update took the car to my local garage who looks after my car and mot when he took the front sump off he found metal filings in the oil , the main sump plug was cross theaded as were some of the bolts holding the main sump on i have found a replacement , looked on the parts section but didnt find on is AR25XE
many thanks
pete
Back to top
 
 
IP Logged
 
Pages: 1 2 
Send Topic Print

This is the old site. Please use the new site.