21. Jul 2025 at 10:30

	Welcome, Guest. Please Login

Shop

Help

Members

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

Omega Owners Forum › Omega Help › Omega General Help › master brake cylinder seals

‹ Previous Topic | Next Topic ›

Pages: 1

master brake cylinder seals (Read 800 times)

tommycon

Junior Member

Offline

Posts: 191
oldham
Gender: male

Drives: 2.2 dti cdx, calibra V6

master brake cylinder seals
05. Jan 2011 at 18:37

hiya
as anyone replaced the seals on the master brake cylinder? if so how easy of a job is it ?
anybody know how many different master brake cylinders there are? do some models share the same or does it depend on engine size or year?
i`ve done this job a few times on older vauxhalls and range rovers and i`m thinking it should be the same.
my car is a 2.2 dti
many thanks Paul

IP Logged

2woody Omega Knight Offline Posts: 1402 Northumberland Drives: '02 MV6, '99 Elite, '99 MV6 estate, '92 Evo 500, Commodore SS	Re: master brake cylinder seals Reply #1 - 06. Jan 2011 at 08:27 I'm not sure you can buy them any more - but easy if available. three different master cylinders fitted to Omega B
Back to top	IP Logged

andyc Senior Member Offline Posts: 704 Drive Vauxhall Gender: Drives: Bury St Edmunds, Suffolk	Re: master brake cylinder seals Reply #2 - 06. Jan 2011 at 09:23 Seal kits not available for any of the Omegas. Looks like there is only one cylinder listed for all face lift models. Trade price your looking at £157.14 + VAT Cheers Andy
Back to top	Assistant Parts Manager, Drive Vauxhall, Bury St Edmunds, Suffolk. 01284 777254. 10% Extra Discount off current Trade Club Prices on Water Pumps & Timing belt kits + a free goodie bag IP Logged

Marks DTM Calib Administrator Offline Ex Member Posts: 25671 Northern Hemisphere Gender: Drives: Astra J, Mum Bus, Dexta Tractor, 108 DMU wip	Re: master brake cylinder seals Reply #3 - 06. Jan 2011 at 09:44 Go second hand, not a common issue on these.
Back to top	IP Logged

andyc Senior Member Offline Posts: 704 Drive Vauxhall Gender: Drives: Bury St Edmunds, Suffolk	Re: master brake cylinder seals Reply #4 - 06. Jan 2011 at 12:30 yeah, can't recall ever being asked for a Master Cylinder so a used one should be ok Andy
Back to top	Assistant Parts Manager, Drive Vauxhall, Bury St Edmunds, Suffolk. 01284 777254. 10% Extra Discount off current Trade Club Prices on Water Pumps & Timing belt kits + a free goodie bag IP Logged

tommycon Junior Member Offline Posts: 191 oldham Gender: Drives: 2.2 dti cdx, calibra V6	Re: master brake cylinder seals Reply #5 - 06. Jan 2011 at 18:32 so do you reckon a 2nd hand unit of any facelift will be the same??? only reason i was gona change the seals is because my brake pedal creeps down if i keep pressure on it, no fluid leaks so assumed it was getting past the seals
Back to top	IP Logged

2woody Omega Knight Offline Posts: 1402 Northumberland Drives: '02 MV6, '99 Elite, '99 MV6 estate, '92 Evo 500, Commodore SS	Re: master brake cylinder seals Reply #6 - 07. Jan 2011 at 09:45 make sure that the bore is the same when you change. the bore size is cast into the housing - you could have a choice of 25 & 20 or 25 & 25
Back to top	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

This is the old site. Please use the new site.

« Home

‹ Board

Top of this page