11. Apr 2026 at 05:58

	Welcome, Guest. Please Login

Shop

Help

Members

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

Omega Owners Forum › Omega Help › Omega General Help › ignition lock 2002 facelift

‹ Previous Topic | Next Topic ›

Pages: 1

ignition lock 2002 facelift (Read 236 times)

dunpullin

Newbie

Offline

Posts: 27
ayrshire scotland
Gender: male

Drives: 02 2.2cd

ignition lock 2002 facelift
13. Jan 2011 at 20:45

hi again
found a couple of hours to-day to have a go at cleaning & regreasing the ignition barrel
apart from removing the covers nothing else matched what is in the guide
no sign of barrel release hole
flat electrical conection under the barrel
round soft plastic over the front of the barrel with the key positions marked on it
needless to say all this put the wind up me so i've put the covers back on and i'm looking for more help please

IP Logged

Welung666 Omega Lord Offline Posts: 9768 West Midlands Gender: Drives: 99 2.5 saloon Tractor	Re: ignition lock 2002 facelift Reply #1 - 13. Jan 2011 at 20:51 Unplug the flat electrical plug, the rubber disc with the I II etc. on the has 3 small locking tabs and pulls off then the black immobiliser box slides off the same way. Put the key in and turn to the first click then push a small allen key into the release hole and Robert is your fathers brother
Back to top	Vehicle Movements, MOT's, tints and Repairs - PM for details. CLICK HERE for instructions - how to Paperclip/Pedal test your car IP Logged

dunpullin Newbie Offline Posts: 27 ayrshire scotland Gender: Drives: 02 2.2cd	Re: ignition lock 2002 facelift Reply #2 - 13. Jan 2011 at 21:07 sorry for being thick is it justa bit of brute force thats needed to release the 3 locking tabs
Back to top	IP Logged

Welung666 Omega Lord Offline Posts: 9768 West Midlands Gender: Drives: 99 2.5 saloon Tractor	Re: ignition lock 2002 facelift Reply #3 - 13. Jan 2011 at 21:09 dunpullin wrote on 13. Jan 2011 at 21:07: sorry for being thick is it justa bit of brute force thats needed to release the 3 locking tabs More of a gentle pull than brute force. There is one tab at the top, gently pull it up slightly using a fingernail and give the ring a wiggle, it should just pull off then.
Back to top	Vehicle Movements, MOT's, tints and Repairs - PM for details. CLICK HERE for instructions - how to Paperclip/Pedal test your car IP Logged

dunpullin Newbie Offline Posts: 27 ayrshire scotland Gender: Drives: 02 2.2cd	Re: ignition lock 2002 facelift Reply #4 - 13. Jan 2011 at 21:14 cheers thanks for all your help i'll try and have a go at the wek end weather permitting
Back to top	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

This is the old site. Please use the new site.

« Home

‹ Board

Top of this page