My aim is to get mine sitting on some 19's on prob a -30mm drop on a Weitec suspension kit....

Its all about the rims! 

so beauty

got the keskins on yet? i have an mv6 that had them on when i got it, they were sprayed black. ive since sold them (unsurprisingly to a golf owner) and put elite alloys on instead. and ive sold the kamei grille too, but this is what it looked like when i got it:

Thank you.

Those League 208 Black rims that I had were 19x8 ET35 235/35R19. And weitec -30 suspension kit too. 

Keskins are waiting for the summer and summer tires that will be 215/40R18 and 235/40R18. I have to wait for two months yet that I can ride with them  And those keskins need some fix. I'll put pics here when I got them in my omega.

It's so much snow and -30`c frost now. Breathing system is difficult, at least here in Finland. It collects dirt and moisture into it which then freezes. This causes the engine that usually leak oils out from valvecovers. But in my case last winter it leaked from the deck also. I cleaned the breathing pipe from dirt and put some insulation on the pipe. Here in Finland this winter too many V6 has done it, especially heard of 3.2v6 C-vectras.

I changed the computer to 2.5v6 omegas computer. I dont know do I have to program it to my engine? Also I changed white leds there.

Hehe, I've been working with the front for now and it's starting to look good. I had to do some metal work. Still waiting for new headlamps, bumper and hood. I had to replace the cooler because it leaked fluid from the plastic edge. I hope that this can be back on the road as quickly as possible. New grill came to me today : 

Sorry to see it like this mate hope you get it sorted soon and back to its former self.

Thnx. Those first alloys where very nice but too narrow (7 or 7½'') and ET35 so it was too hard to get them out in the back. I think now the keskins 9,5'' ET35 with 20mm spacer  (->ET15) will be good