08. Apr 2026 at 16:53

	Welcome, Guest. Please Login

Shop

Help

Members

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

Omega Owners Forum › Omega Help › Omega General Help › No Heater From 99 Elite

‹ Previous Topic | Next Topic ›

Pages: 1

No Heater From 99 Elite (Read 307 times)

MutantCav

Omega Baron

Offline

Posts: 4585
Gainsborough
Gender: male

Drives: 3.0 2000 Mini Facelift Elite Saloon

No Heater From 99 Elite
13. Feb 2011 at 20:58

Just got a new car and have a combination of no heat from the heater and the car mists up inside really quick unless the fans on trying the heat the car...

Could well be some dampness due to it being winter with no heat but think it may be more than coincidience tbh and the condensation is from the heating system leaking??

My thoughts are that either the particulate filter thing needs cleaning/unblocking or the heater system needs flushing...any other ideas??

Lots of Omega Parts Available...Anyone Need Anything??

IP Logged

PhilRich Omega Lord Offline Proud to be English, with no apologies to ANYONE! Posts: 6825 NorthEast Coast Gender: Drives: 2002 2.2CDX 4dr Auto. LPG Converted.	Re: No Heater From 99 Elite Reply #1 - 13. Feb 2011 at 21:00 Check the scuttle drains are clear of debris & the pollen filter is dry.
Back to top	Apparently the Skipper said "Hard a Port!" but I went to Starboard, 'cos i'm Hard a Hearin'! IP Logged

MutantCav Omega Baron Offline Posts: 4585 Gainsborough Gender: Drives: 3.0 2000 Mini Facelift Elite Saloon	Re: No Heater From 99 Elite Reply #2 - 13. Feb 2011 at 23:04 Was my first thought along with washing the filter...will try it tomorrow and see if we need more thought
Back to top	Lots of Omega Parts Available...Anyone Need Anything?? IP Logged

Entwood

Omega King

Offline

Quietly Confident

Posts: 13708
North Wiltshire
Gender: male

Drives: 3.2 Elite (with LPG)

Re: No Heater From 99 Elite
Reply #3 - 13. Feb 2011 at 23:08

No heat .. possible HBV stuck closed ??? check the pipes from the HBV to the heater matrix for heat .. should be VERY hot. Take the vac pipe off the HBV, no vac = heat .. (but block the vac pipe with a screw or similar)

Misting up .. as mentioned .. scuttle, filter .. but also the little cubby hole in the boot -right hand side, right down the bottom the vents that get rid of all the stale air in the car .. make sure they are not blocked by bits of rag/paper etc etc..

V6 Cam locking/setting kit, Maxscan GS500 OBDII code reader/EML resetter available. Click for some Pictures

IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

This is the old site. Please use the new site.

« Home

‹ Board

Top of this page