Omega Owners Forum - Facelift door

...Matski... Newbie Offline Posts: 12 Drives: 1999 Omega 2.5v6 Elite	Facelift door 16. Feb 2011 at 09:11 Hi all, I had a dented passenger door on a 99 omega. I was wondering if a 2000 (facelift) door will fit as I think I've found one in the same color (z144 met gray) Thanks in advance, Matt.
Back to top	IP Logged

RobG Omega Lord Offline I might have a link, pic or part number for that Posts: 7968 Bristol Gender: Drives: 53 plate 2.2 CD auto	Re: Facelift door Reply #1 - 16. Feb 2011 at 09:18 Yep, it`ll fit.
Back to top	TC Holder Maxscan GS500 OBDII code reader/EML resetter available.. IP Logged

...Matski... Newbie Offline Posts: 12 Drives: 1999 Omega 2.5v6 Elite	Re: Facelift door Reply #2 - 16. Feb 2011 at 09:23 Great thanks. I take it it's just the mirror and card that are different? Presumably I could get the other mirror too?
Back to top	« Last Edit: 16. Feb 2011 at 09:27 by ...Matski... » IP Logged

RobG Omega Lord Offline I might have a link, pic or part number for that Posts: 7968 Bristol Gender: Drives: 53 plate 2.2 CD auto	Re: Facelift door Reply #3 - 16. Feb 2011 at 09:26 You`ll have to swap your door loom over (easy enough) unless the donor door is from an Elite.
Back to top	« Last Edit: 16. Feb 2011 at 09:27 by RobG » TC Holder Maxscan GS500 OBDII code reader/EML resetter available.. IP Logged

...Matski... Newbie Offline Posts: 12 Drives: 1999 Omega 2.5v6 Elite	Re: Facelift door Reply #4 - 16. Feb 2011 at 09:28 Thats grand I'll swap the guts out. Will the older loom work with the new style mirrors? Lastly are the chrome trims possible to swap?
Back to top	« Last Edit: 16. Feb 2011 at 09:29 by ...Matski... » IP Logged

RobG

Omega Lord

Offline

I might have a link, pic
or part number for that

Posts: 7968
Bristol
Gender: male

Drives: 53 plate 2.2 CD auto

Re: Facelift door
Reply #5 - 16. Feb 2011 at 09:39

...Matski... wrote on 16. Feb 2011 at 09:28:

Thats grand I'll swap the guts out. Will the older loom work with the new style mirrors?

Lastly are the chrome trims possible to swap?

If you mean the bump strip.....the facelift is held on by a small torx either end & slides off, yours will be bonded on, will come off with time, patience & heat. Don`t forget to use your speaker as your`s being an Elite will probably have Bose. Mirror will work

Back to top

« Last Edit: 16. Feb 2011 at 09:39 by RobG »

TC Holder Maxscan GS500 OBDII code reader/EML resetter available..

IP Logged

RobG Omega Lord Offline I might have a link, pic or part number for that Posts: 7968 Bristol Gender: Drives: 53 plate 2.2 CD auto	Re: Facelift door Reply #6 - 16. Feb 2011 at 09:41 Link for removing your door trim http://www.omegaowners.com/forum/YaBB.pl?num=1192324445
Back to top	TC Holder Maxscan GS500 OBDII code reader/EML resetter available.. IP Logged

...Matski... Newbie Offline Posts: 12 Drives: 1999 Omega 2.5v6 Elite	Re: Facelift door Reply #7 - 16. Feb 2011 at 09:46 Nice one thanks for your help. Getting the trim off to refit looks tricky!
Back to top	IP Logged

RobG Omega Lord Offline I might have a link, pic or part number for that Posts: 7968 Bristol Gender: Drives: 53 plate 2.2 CD auto	Re: Facelift door Reply #8 - 16. Feb 2011 at 09:47 ...Matski... wrote on 16. Feb 2011 at 09:46: Nice one thanks for your help. Getting the trim off to refit looks tricky! May be worth contacting VX getting cost for replacement
Back to top	TC Holder Maxscan GS500 OBDII code reader/EML resetter available.. IP Logged

...Matski... Newbie Offline Posts: 12 Drives: 1999 Omega 2.5v6 Elite	Re: Facelift door Reply #9 - 16. Feb 2011 at 09:53 I'll have a go first then spend out when I stuff it up!
Back to top	IP Logged

This is the old site. Please use the new site.

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

This is the old site. Please use the new site.

	Welcome, Guest. Please Login