Omega Owners Forum - HEEEEEELP !!!!

Martin Imber Over Active Poster Offline LPG Omega V6 - Keyfobs Rebuilt Posts: 20110 Worcester Gender: Drives: 2001 Omega 2.6CD LPG & 3.0 cams	Re: HEEEEEELP !!!! Reply #30 - 31. Mar 2011 at 15:31 For now cover in silicone sealer?
Back to top	The other tuned 2.6. DIY LPG, towbar, upgrade ICE & Wing Spoiler, Air shocks, Eibach Pro Springs, Poly WB bushes, WIM setup, HID conversion, 3.0 cams, ported ect. IP Logged

Entwood

Omega King

Offline

Quietly Confident

Posts: 13708
North Wiltshire
Gender: male

Drives: 3.2 Elite (with LPG)

Re: HEEEEEELP !!!!
Reply #31 - 31. Mar 2011 at 17:18

TheBoy wrote on 31. Mar 2011 at 14:30:

TheBoy wrote on 31. Mar 2011 at 13:56:

Entwood wrote on 31. Mar 2011 at 13:48:

TheBoy wrote on 31. Mar 2011 at 13:46:

Bugger, just threw away an ABS sensor (attached to a front hub) last weekend. Law of bloody sod.

Might have another sensor if you need Entwood...

If you have one I'll willing purchase it ... unprotected its bound to fail .. even if it works now !!!

Looks like its changeable from the rear without taking the hub apart .. again ..

PM me your address, I'll get it in post over weekend. Free.

Scrub that, I damaged it whilst removing Embarrassed

Seems (unless mine was particularly seized) that drifting the old one out isn't going to work Embarrassed

Not to worry .. wanted ad going up shortly ... and a PM to AndyC for a price ..

if its cheap enough I'll go for a new one ..

Just been to swidnod and back - returning the 400 Nm torque wrench £12 + VAT for 1/2 a day .. not bad IMHO - horrible "drone" has gone, no play in steering

But we now have TC + ABS lights on ... so I guess I did a good job in mullering the sensor..

Back to top

« Last Edit: 31. Mar 2011 at 17:19 by Entwood »

V6 Cam locking/setting kit, Maxscan GS500 OBDII code reader/EML resetter available. Click for some Pictures

IP Logged

Lazydocker Omega King Offline Victim of Pinky's Power Trip! Posts: 11336 Woodbridge, Suffolk Gender: Drives: 2003 3.2 Elite Estate LPG Converted, inspected and Certified	Re: HEEEEEELP !!!! Reply #32 - 31. Mar 2011 at 17:25 Glad you got it all done... Shame about the sensor though. I think they may be the same front/rear If they are, a 2nd hand rear in better condition may be easier to come by
Back to top	Whatever it is... I didn't do it IP Logged

Entwood Omega King Offline Quietly Confident Posts: 13708 North Wiltshire Gender: Drives: 3.2 Elite (with LPG)	Re: HEEEEEELP !!!! Reply #33 - 31. Mar 2011 at 17:32 Looking at EPC fronts are different part numbers to rears Fronts - 90509421 Rears - 90510494 According to this site .. £40.47 .... http://www.genuinepartsearch.co.uk/vauxhall-parts-stock-list.aspx?page=183
Back to top	« Last Edit: 31. Mar 2011 at 17:34 by Entwood » V6 Cam locking/setting kit, Maxscan GS500 OBDII code reader/EML resetter available. Click for some Pictures IP Logged

Desperate Den Omega King Offline Posts: 11881	Re: HEEEEEELP !!!! Reply #34 - 31. Mar 2011 at 17:39 Well done all the same E.
Back to top	IP Logged

davethediver Omega Knight Offline Posts: 1323 Blackburn, Lancs. Gender: Drives: 2.2 CD Facelift (2001)	Re: HEEEEEELP !!!! Reply #35 - 31. Mar 2011 at 20:54 Well done Nige i found the hardest bit on mine was undoing the old nut and watching pete bounce up and down on a long pole
Back to top	“It is not necessary to understand things in order to argue about them.” P.A. Caron de Beaumarchais IP Logged

Andy B Over Active Poster Offline Posts: 21988 Bury Lancs Gender: Drives: 1999 3.0 Elite auto/TDM	Re: HEEEEEELP !!!! Reply #36 - 31. Mar 2011 at 21:08 davethediver wrote on 31. Mar 2011 at 20:54: ...... pete bounce up and down on a long pole Ooooer!
Back to top	IP Logged

chrisgixer Omega King Offline Black ones are faster. Posts: 14570 Wokingham Gender: Drives: "Omega Black" 3.2 Elite. Thanks to Joshwyatt.	Re: HEEEEEELP !!!! Reply #37 - 31. Mar 2011 at 23:15 So who was it implied removing the abs sensor was an easy job? I had a new baring that fell apart like that out of the box. Fitted it anyway.
Back to top	IP Logged

sassanach Senior Member Offline Posts: 805 trowbridge Gender:	Re: HEEEEEELP !!!! Reply #38 - 01. Apr 2011 at 10:13 should of come to trowbridge mate,(as per my offer) where you would off been surrounded by every weapon the diy motor mech could possibly have needed,(and then some)
Back to top	IP Logged

TheBoy Administrator Offline TBE has an MOT! Posts: 64817 Brackley, Northants Gender: Drives: 98 MV6, 03 Elite, 00 25, 89 ZX10	Re: HEEEEEELP !!!! Reply #39 - 01. Apr 2011 at 11:18 sassanach wrote on 01. Apr 2011 at 10:13: should of come to trowbridge mate,(as per my offer) where you would off been surrounded by every weapon the diy motor mech could possibly have needed,(and then some) Indeed, far too many toys for a simple country boy like me, don't know what most of them do
Back to top	If you are going to kick a car, remember to wear appropriate footwear Any posts are the result of my own views as a member of OOF, which may or may not be the same as my views as part of the Admin Team. IP Logged

Entwood

Omega King

Offline

Quietly Confident

Posts: 13708
North Wiltshire
Gender: male

Drives: 3.2 Elite (with LPG)

Re: HEEEEEELP !!!!
Reply #40 - 01. Apr 2011 at 11:22

sassanach wrote on 01. Apr 2011 at 10:13:

should of come to trowbridge mate,(as per my offer) where you would off been surrounded by every weapon the diy motor mech could possibly have needed,(and then some) Thumbs Up!

Perhaps with hindsight Thumbs Up!

.. but it's still nice to get the job done myself.

OK .. I broke the ABS sensor by careless use of a percussion instrument..... still might have done the same using your selection of weapons....

Back to top

V6 Cam locking/setting kit, Maxscan GS500 OBDII code reader/EML resetter available. Click for some Pictures

IP Logged

Marks DTM Calib Administrator Offline Ex Member Posts: 25671 Northern Hemisphere Gender: Drives: Astra J, Mum Bus, Dexta Tractor, 108 DMU wip	Re: HEEEEEELP !!!! Reply #41 - 01. Apr 2011 at 12:14 sassanach wrote on 01. Apr 2011 at 10:13: should of come to trowbridge mate,(as per my offer) where you would off been surrounded by every weapon the diy motor mech could possibly have needed,(and then some) Can you ream little ends....
Back to top	IP Logged

Andy B Over Active Poster Offline Posts: 21988 Bury Lancs Gender: Drives: 1999 3.0 Elite auto/TDM	Re: HEEEEEELP !!!! Reply #42 - 01. Apr 2011 at 12:55 Marks DTM Calib wrote on 01. Apr 2011 at 12:14: ...... Can you ream little ends.... Doesn't that depend on the size of your little end?
Back to top	IP Logged

Marks DTM Calib Administrator Offline Ex Member Posts: 25671 Northern Hemisphere Gender: Drives: Astra J, Mum Bus, Dexta Tractor, 108 DMU wip	Re: HEEEEEELP !!!! Reply #43 - 01. Apr 2011 at 13:04 Excuse the use of out of date measurements (it is an out of date engine!)....1.25 inches !
Back to top	IP Logged

Andy B Over Active Poster Offline Posts: 21988 Bury Lancs Gender: Drives: 1999 3.0 Elite auto/TDM	Re: HEEEEEELP !!!! Reply #44 - 01. Apr 2011 at 13:07 Marks DTM Calib wrote on 01. Apr 2011 at 13:04: Excuse the use of out of date measurements (it is an out of date engine!)....1.25 inches ! Do you seriously need a reamer that size? Hand or machine? I'm not in work till next Tues, but I'll have a look round to see what's about.
Back to top	IP Logged

This is the old site. Please use the new site.

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

This is the old site. Please use the new site.

	Welcome, Guest. Please Login