25. Mar 2026 at 22:26

	Welcome, Guest. Please Login

Shop

Help

Members

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

Omega Owners Forum › Omega Help › Omega General Help › error code 61 bosch ecu 2.8.1 2.5 model v6 auto

‹ Previous Topic | Next Topic ›

Pages: 1

error code 61 bosch ecu 2.8.1 2.5 model v6 auto (Read 730 times)

rays

Newbie

Offline

Posts: 2

Drives: omega 2.5 v6 auto

error code 61 bosch ecu 2.8.1 2.5 model v6 auto
02. Apr 2011 at 00:29

I have error code 61 , low voltage on purge valve. I have checked out valve and wiring and valve works if I earth earth pin 5 to pin 19 (earth pin) but warning light still stays on presumable beacause it has not switched earth thro. the ecu, Is it possible to change the ecu for a spare of another car without recoding etc. if it is an ecu fault.
Thanks , Ray

IP Logged

TheBoy Administrator Offline TBE has an MOT! Posts: 64817 Brackley, Northants Gender: Drives: 98 MV6, 03 Elite, 00 25, 89 ZX10	Re: error code 61 bosch ecu 2.8.1 2.5 model v6 auto Reply #1 - 02. Apr 2011 at 11:05 I very much doubt the ECU has a fault, I'd be looking at the valve and associated wiring to be honest
Back to top	If you are going to kick a car, remember to wear appropriate footwear Any posts are the result of my own views as a member of OOF, which may or may not be the same as my views as part of the Admin Team. IP Logged

TheBoy Administrator Offline TBE has an MOT! Posts: 64817 Brackley, Northants Gender: Drives: 98 MV6, 03 Elite, 00 25, 89 ZX10	Re: error code 61 bosch ecu 2.8.1 2.5 model v6 auto Reply #2 - 02. Apr 2011 at 11:05 But to directly answer your Q, it depends on the age of the car.
Back to top	If you are going to kick a car, remember to wear appropriate footwear Any posts are the result of my own views as a member of OOF, which may or may not be the same as my views as part of the Admin Team. IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

This is the old site. Please use the new site.

« Home

‹ Board

Top of this page