02. Apr 2026 at 23:55

	Welcome, Guest. Please Login

Shop

Help

Members

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

Omega Owners Forum › Omega Help › Omega General Help › 2.2 auto gearbox ecu

‹ Previous Topic | Next Topic ›

Pages: 1

2.2 auto gearbox ecu (Read 632 times)

vomega51 Newbie Offline Posts: 30 east london Gender: Drives: elite 3.2,omega 2.6 cdx auto,astra 2.2 sri,range rover vogue,vivaro van	2.2 auto gearbox ecu 04. Apr 2011 at 19:01 hi, can anyone tell me where to find the gearbox ecu on an omega 2002 2.2 auto please, any help would be most appreciated, thanks
Back to top	IP Logged

Jimbob Global Moderator Admin Team Offline Third nipple removal completed succesfuly Posts: 20462 Chester / Flintshire Gender: Drives: 52 3.2 MV6 Estate & 98 3.0 MV6 Manual Estate	Re: 2.2 auto gearbox ecu Reply #1 - 04. Apr 2011 at 19:02 drivers kick panel iirc.... Why though? they dont normally need 'finding'
Back to top	Maintenance Guides & Code Reading FAQ & Common Questions IP Logged

vomega51 Newbie Offline Posts: 30 east london Gender: Drives: elite 3.2,omega 2.6 cdx auto,astra 2.2 sri,range rover vogue,vivaro van	Re: 2.2 auto gearbox ecu Reply #2 - 04. Apr 2011 at 19:08 my gearbox seems to be a bit erratic, not as smooth as it used to be, it will hold on for what seems like ages before it changes from 2nd to 3rd and sounds like im thrashing it when i am not on kick down it just stays there for ages even when i release the throttle it still wont change up for about 40 secs
Back to top	IP Logged

Jimbob

Global Moderator
Admin Team

Offline

Third nipple removal completed
succesfuly

Posts: 20462
Chester / Flintshire
Gender: male

Drives: 52 3.2 MV6 Estate & 98 3.0 MV6 Manual Estate

Re: 2.2 auto gearbox ecu
Reply #3 - 04. Apr 2011 at 19:12

finding the ecu wont help, there will be nothing wrong with it.
(can possibly run a later software version, but it need to remain in the car to be updated)

Have you checked the gearbox fluid level? or even better given it a full ATF change?
or had a code reader on the gearbox to see if any codes stored? has it ever given you the automatic gearbox message on the display.
Does it ever really thump into gear?

Maintenance Guides & Code Reading
FAQ & Common Questions

IP Logged

vomega51 Newbie Offline Posts: 30 east london Gender: Drives: elite 3.2,omega 2.6 cdx auto,astra 2.2 sri,range rover vogue,vivaro van	Re: 2.2 auto gearbox ecu Reply #4 - 04. Apr 2011 at 19:42 hi jimbob, i will try changing the atf, it thumps into gear after holding on to the revs, have had no messages in the display, will try a code reader tommorrow to see if anything comes up, thanks for your advice
Back to top	IP Logged

PhilRich

Omega Lord

Offline

Proud to be English, with
no apologies to ANYONE!

Posts: 6825
NorthEast Coast
Gender: male

Drives: 2002 2.2CDX 4dr Auto. LPG Converted.

Re: 2.2 auto gearbox ecu
Reply #5 - 04. Apr 2011 at 19:59

vomega51 wrote on 04. Apr 2011 at 19:42:

hi jimbob, i will try changing the atf, it thumps into gear after holding on to the revs, have had no messages in the display, will try a code reader tommorrow to see if anything comes up, thanks for your advice

Hi mate, have a look here and follow the guides Thumbs Up!

http://www.omegaowners.com/forum/YaBB.pl?num=1152783586

http://www.omegaowners.com/forum/YaBB.pl?num=1289757627

http://www.omegaowners.com/forum/YaBB.pl?num=1267956397

Apparently the Skipper said "Hard a Port!" but I went to Starboard, 'cos i'm Hard a Hearin'!

IP Logged

TheBoy Administrator Offline TBE has an MOT! Posts: 64817 Brackley, Northants Gender: Drives: 98 MV6, 03 Elite, 00 25, 89 ZX10	Re: 2.2 auto gearbox ecu Reply #6 - 04. Apr 2011 at 20:44 The TCMs are supremely reliable, so that definately wouldn't be my first port of call. Check the ATF, both for level and its condition. And codes stored in the TCM (most code readers cannot read the TCM) might give some clues, but I suspect its a hydromechanical fault
Back to top	If you are going to kick a car, remember to wear appropriate footwear Any posts are the result of my own views as a member of OOF, which may or may not be the same as my views as part of the Admin Team. IP Logged

Jimac Junior Member Offline Posts: 71 Newcastle upon Tyne Gender: Drives: 2003 Omega 2.2 CD Petrol Auto	Re: 2.2 auto gearbox ecu Reply #7 - 05. Apr 2011 at 10:49 Could be a failing cam sensor (code P0340). Mine did this couple of times when I was getting the spanner or engine light on. It's worth just disconnecting the cam sensor and reconnecting again. This worked for me, but YMMV!
Back to top	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

This is the old site. Please use the new site.

« Home

‹ Board

Top of this page