26. Feb 2026 at 18:52

	Welcome, Guest. Please Login

Shop

Help

Members

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

Omega Owners Forum › Chat › General Car Chat › Thanks for the guides

(Moderators: Marks DTM Calib, TheBoy, Darth Loo-knee, Auto Addict, hotel21)

‹ Previous Topic | Next Topic ›

Pages: 1

Thanks for the guides (Read 373 times)

Jimbob Global Moderator Admin Team Offline Third nipple removal completed succesfuly Posts: 20462 Chester / Flintshire Gender: Drives: 52 3.2 MV6 Estate & 98 3.0 MV6 Manual Estate	Thanks for the guides 13. Apr 2011 at 09:37 Big Thanks to Razzo for a guide on removing wishbone bushes ready for sliding in the new poly bushes and to Marks DTM Calib for a guide on replacing your bonnet catch spring, great when you r bonnet wont release even if the cable is the correct tension, and I guide I need myself!
Back to top	Maintenance Guides & Code Reading FAQ & Common Questions IP Logged

chrisgixer Omega King Offline Black ones are faster. Posts: 14570 Wokingham Gender: Drives: "Omega Black" 3.2 Elite. Thanks to Joshwyatt.	Re: Thanks for the guides Reply #1 - 13. Apr 2011 at 10:34 And me, been fiddling with the bonnet catch on the other car constantly. To no avail. Thanks Mark, and Razzo.
Back to top	IP Logged

Marks DTM Calib Administrator Offline Ex Member Posts: 25671 Northern Hemisphere Gender: Drives: Astra J, Mum Bus, Dexta Tractor, 108 DMU wip	Re: Thanks for the guides Reply #2 - 14. Apr 2011 at 09:15 All feedback on the guide appreciated (as it sometimes seems easy to me yet I may be assuming certain stages)
Back to top	IP Logged

chrisgixer

Omega King

Offline

Black ones are faster.

Posts: 14570
Wokingham
Gender: male

Drives: "Omega Black" 3.2 Elite. Thanks to Joshwyatt.

Re: Thanks for the guides
Reply #3 - 14. Apr 2011 at 09:30

Previously I couldn't gain access to the underside of the slam panel to release the spring from the cable. Noticed the small nut by the rad to take the under cover off but asn't sure I wouldn't end up with a load of bits pinging off in all directions. Should be easy enough now I can see how it works. Thumbs Up!

Spring is badly worn as it was set up loose and bonnet was rattling while driving. Presumably because they hadn't sussed the cable adjustment. Undecided

IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

This is the old site. Please use the new site.

« Home

‹ Board

Top of this page