Omega Owners Forum - New code P0017

Raymienets Intermediate Member Offline Posts: 373 Glasgow Gender: Drives: 2.2 CD Auto	New code P0017 15. Apr 2011 at 17:31 Bought a new code reader and after having replaced the solonioid have managed to get rid of code p0743 spanner light still not going out new code p0017
Back to top	IP Logged

PhilRich Omega Lord Offline Proud to be English, with no apologies to ANYONE! Posts: 6825 NorthEast Coast Gender: Drives: 2002 2.2CDX 4dr Auto. LPG Converted.	Re: New code P0017 Reply #1 - 15. Apr 2011 at 18:04 Are you sure it is P0070 as this isn't a listed faultcode for the 2.2? If your codereader can reset stored codes, I would try clearing them & see if they/it re-appears?
Back to top	Apparently the Skipper said "Hard a Port!" but I went to Starboard, 'cos i'm Hard a Hearin'! IP Logged

Raymienets Intermediate Member Offline Posts: 373 Glasgow Gender: Drives: 2.2 CD Auto	Re: New code P0017 Reply #2 - 15. Apr 2011 at 18:07 The code is P0017.When I try to reset it it just comes back on again.
Back to top	« Last Edit: 15. Apr 2011 at 18:08 by Raymienets » IP Logged

Raymienets Intermediate Member Offline Posts: 373 Glasgow Gender: Drives: 2.2 CD Auto	Re: New code P0017 Reply #3 - 15. Apr 2011 at 18:09 PhilRich wrote on 15. Apr 2011 at 18:04: Are you sure it is P0070 as this isn't a listed faultcode for the 2.2? If your codereader can reset stored codes, I would try clearing them & see if they/it re-appears? Not P0070
Back to top	IP Logged

PhilRich Omega Lord Offline Proud to be English, with no apologies to ANYONE! Posts: 6825 NorthEast Coast Gender: Drives: 2002 2.2CDX 4dr Auto. LPG Converted.	Re: New code P0017 Reply #4 - 15. Apr 2011 at 18:11 Sorry Raymienets, slip of the finger I meant to say there is no P0017 listed for the 2.2 A search for the generic Code P0017 comes up with this: P0017 Crankshaft Position Camshaft Position Correlation but the crankshaft fault code for the 2.2 is P0335 afaiaa, so not sure what's going on there
Back to top	« Last Edit: 15. Apr 2011 at 18:26 by PhilRich » Apparently the Skipper said "Hard a Port!" but I went to Starboard, 'cos i'm Hard a Hearin'! IP Logged

Raymienets Intermediate Member Offline Posts: 373 Glasgow Gender: Drives: 2.2 CD Auto	Re: New code P0017 Reply #5 - 15. Apr 2011 at 18:23 PhilRich wrote on 15. Apr 2011 at 18:11: Sorry Raymienets, slip of the finger I meant to say there is no P0017 listed for the 2.2 P0017 - Crankshaft position Camshaft position (Bank 1 Sensor B) whatever that means
Back to top	IP Logged

GooseMan

Omega Knight

Offline

Posts: 1351
Shropshire
Gender: male

Drives: 3.2 saloon special

Re: New code P0017
Reply #6 - 15. Apr 2011 at 19:54

Raymienets wrote on 15. Apr 2011 at 17:31:

Bought a new code reader and after having replaced the solonioid have managed to get rid of code p0743 spanner light still not going out new code p0017

Okay lets go back to the beginning and maybe an idea to explain what problems / issues you were having before you replaced the solenoid, may help to diagnose. Was the replacement solenoid a new or 2nd hand one? etc, etc.

We maybe able to help better once there's a few more details to hand Thumbs Up!

Back to top

« Last Edit: 15. Apr 2011 at 19:55 by GooseMan »

IP Logged

Raymienets

Intermediate Member

Offline

Posts: 373
Glasgow
Gender: male

Drives: 2.2 CD Auto

Re: New code P0017
Reply #7 - 15. Apr 2011 at 20:08

Problem started with P0743 codeand car going into limp mode, took miggy to auto transmission specialist who said it was either solenoid ot torque converter and he advised to try cheaper option and replace solenoid. Purchased new solenoid from vauxhall and replaced gaskets and ATF fluid. Bought £30 code reader which said it had 2 stored faults. Never read them just reset them then did a scan and got P0017. When I try to reset this code it just comes back on. any advice would be much appreciated as i am pulling my hair out over this.

Back to top

IP Logged

Entwood

Omega King

Offline

Quietly Confident

Posts: 13708
North Wiltshire
Gender: male

Drives: 3.2 Elite (with LPG)

Re: New code P0017
Reply #8 - 15. Apr 2011 at 20:12

Most "cheap" - fake/copy/pirate .. whatever it is - code readers are not good, and do not read the gearbox codes properly ... most are based on ELM327 chip AFAIK

So it might be best to get the codes read by a proper reader ... I believe Broocie (Hotel21) will be the closest forum Tech2 to you.

TBH .. without knowing that the codes given are true and accurate we are just pissing in the wind ... Sad

Back to top

V6 Cam locking/setting kit, Maxscan GS500 OBDII code reader/EML resetter available. Click for some Pictures

IP Logged

Raymienets Intermediate Member Offline Posts: 373 Glasgow Gender: Drives: 2.2 CD Auto	Re: New code P0017 Reply #9 - 15. Apr 2011 at 21:23 Back to square one code P1700 P0743 P0753 Think miggy might be getting cremated shortly
Back to top	IP Logged

TheBoy Administrator Offline TBE has an MOT! Posts: 64817 Brackley, Northants Gender: Drives: 98 MV6, 03 Elite, 00 25, 89 ZX10	Re: New code P0017 Reply #10 - 16. Apr 2011 at 09:49 Which ECU are you getting these codes from?
Back to top	If you are going to kick a car, remember to wear appropriate footwear Any posts are the result of my own views as a member of OOF, which may or may not be the same as my views as part of the Admin Team. IP Logged

This is the old site. Please use the new site.

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

This is the old site. Please use the new site.

	Welcome, Guest. Please Login