18. Feb 2026 at 18:12

	Welcome, Guest. Please Login

Shop

Help

Members

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

Omega Owners Forum › Omega Help › Omega General Help › Alloy wheel compatibility

‹ Previous Topic | Next Topic ›

Pages: 1

Alloy wheel compatibility (Read 558 times)

Newbie

Offline

Posts: 20

Drives: 2.2 Sport

Alloy wheel compatibility
29. Apr 2011 at 16:33

I have been looking around for some wheels to replace my ageing sport alloys. Now I would prefer to retain the OE look but it would seem that prices for well looked after 16 or 17" Vx alloys are pretty high on the bay:

http://cgi.ebay.co.uk/VAUXHALL-OMEGA-16-ALLOY-WHEELS-AND-TYRE-225-55-WR16-/37050...

http://cgi.ebay.co.uk/17-Irmscher-Softstars-alloy-wheels-and-tyres-vauxhall-/140...

Alternatives to original equipment seems to be this:

http://cgi.ebay.co.uk/NEW-16-IRMSCHER-alloy-wheels-Opel-Vauxhall-Vectra-Astr-/31...

Add in the fact that they are new and hopefully more relaible that a second hand pair that may or may not have been repaired

But I suppose the question is whether they would fit. PCD seems ok, but the offset is ET38. I am pretty sure my 17" alloys are ET33. In addition would 6.5J be the right width to maitain original 16" tyre spec?

Any help would be appreciated. Dont want to end up buying the wrong size alloys.

« Last Edit: 29. Apr 2011 at 16:38 by D »

IP Logged

mrgreen

Senior Member

Offline

Posts: 766
Salzburg/austria
Gender: male

Drives: 2.2 facelift caravan

Re: Alloy wheel compatibility
Reply #1 - 29. Apr 2011 at 23:16

don't know whether the extra .5 makes a huge difference in what tyres you can put onbut my registration states 6.5j for 205's so should be alright the big question is with an et of 38 will you get rubbing? from what i understand i maybe fully wrong is that an etof 38 should sit further away from the suspension than an et of 33 but decide for yourself have a look at this website

http://www.tyresave.co.uk/choose.html

the funniest thing about this particular signature is that by the time you realise it doesn't say anything it's to late to stop reading it

IP Logged

o-meg-a Senior Member Offline avatar disabled meantime as its mahoosive! Posts: 592 south wales Gender: Drives: '97 2.5td estate - Manual - chipped	Re: Alloy wheel compatibility Reply #2 - 30. Apr 2011 at 00:57 The lower the offset the further out the wheel will sit. omega wheels differ form many Vectra wheels for instance in that the equivalent vectra wheel may on have an offset of 49, which makes it sit very far in on the omega.
Back to top	IP Logged

D Newbie Offline Posts: 20 Drives: 2.2 Sport	Re: Alloy wheel compatibility Reply #3 - 30. Apr 2011 at 14:39 So does that mean that there is a good possibility that the irmscher wheels would rub? I thought I had seen someones car on here with Irmscher wheels with a ET38 offset.
Back to top	IP Logged

Mr Gav

Junior Member

Offline

Posts: 107

Drives: Facelift MV6 3.0l

Re: Alloy wheel compatibility
Reply #4 - 30. Apr 2011 at 14:48

D wrote on 30. Apr 2011 at 14:39:

So does that mean that there is a good possibility that the irmscher wheels would rub? I thought I had seen someones car on here with Irmscher wheels with a ET38 offset.

Depends on the width of the rim, the difference between the et33 and et38 is only 5mm but the difference between a 6.5j and a 7j rim is 12.5 mm so a 6.5 inch rim with a et38 offset would be further away from the strut than a 7 inch rim with et33 offset.
I have some 7 inch rims with a et40 and these don`t rub but this effectively narrows the track by 14mm which is why I`ll be putting some wheels on with the correct et33 offset.

IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

This is the old site. Please use the new site.

« Home

‹ Board

Top of this page