Omega Owners Forum - Engine management light

richardw Newbie Offline Posts: 9 Drives: Omega 2.0 GLS '97	Engine management light 30. Apr 2011 at 16:36 Hi all, I just bought my Omega 2.0 gls today and joined up straight away.Great forum by the way. I noticed that the yellow em light was on and wondered how to turn this off. Thanks in advance. Rich.
Back to top	IP Logged

Andy B

Over Active Poster

Offline

Posts: 21988
Bury Lancs
Gender: male

Drives: 1999 3.0 Elite auto/TDM

Re: Engine management light
Reply #1 - 30. Apr 2011 at 16:42

richardw wrote on 30. Apr 2011 at 16:36:

......

I noticed that the yellow em light was on and wondered how to turn this off.

....

.

Hi, welcome to the forum.
If the EML is on there is a fault. You need to identify the fault & fix it. Wink

Have a look here ..... http://www.omegaowners.com/forum/YaBB.pl?num=1189022687
and go from there. Thumbs Up!

IP Logged

richardw Newbie Offline Posts: 9 Drives: Omega 2.0 GLS '97	Re: Engine management light Reply #2 - 30. Apr 2011 at 17:41 hi, thanks i have done the paper clip check i got 10335 101310 103410 any idea where i can get the codes
Back to top	IP Logged

RobG Omega Lord Offline I might have a link, pic or part number for that Posts: 7968 Bristol Gender: Drives: 53 plate 2.2 CD auto	Re: Engine management light Reply #3 - 30. Apr 2011 at 17:46 richardw wrote on 30. Apr 2011 at 17:41: hi, thanks i have done the paper clip check i got 10335 101310 103410 any idea where i can get the codes 10 flashes = 0 so you`ve got 0335 0130 0340 Codes......http://www.omegaowners.com/forum/YaBB.pl?num=1206569945
Back to top	TC Holder Maxscan GS500 OBDII code reader/EML resetter available.. IP Logged

richardw Newbie Offline Posts: 9 Drives: Omega 2.0 GLS '97	Re: Engine management light Reply #4 - 01. May 2011 at 20:29 hi now i know the codes. code 335 is incorrect rpm signal. my car doesnt allow me to rev above 4300 rpm when the eml is on would that be the problem and also what does the eco buttom do thanks
Back to top	IP Logged

Andy B Over Active Poster Offline Posts: 21988 Bury Lancs Gender: Drives: 1999 3.0 Elite auto/TDM	Re: Engine management light Reply #5 - 01. May 2011 at 20:32 richardw wrote on 01. May 2011 at 20:29: .... and also what does the eco buttom do thanks Knocks the a/c compressor off.
Back to top	IP Logged

richardw Newbie Offline Posts: 9 Drives: Omega 2.0 GLS '97	Re: Engine management light Reply #6 - 01. May 2011 at 20:33 sorry do you mean air con didnt know i had that
Back to top	IP Logged

richardw Newbie Offline Posts: 9 Drives: Omega 2.0 GLS '97	Re: Engine management light Reply #7 - 01. May 2011 at 20:37 also i forgot to mention when the eml is off i can rev as much as i like but engine can cutt out
Back to top	IP Logged

RobG Omega Lord Offline I might have a link, pic or part number for that Posts: 7968 Bristol Gender: Drives: 53 plate 2.2 CD auto	Re: Engine management light Reply #8 - 01. May 2011 at 20:38 richardw wrote on 01. May 2011 at 20:29: hi now i know the codes. code 335 is incorrect rpm signal. my car doesnt allow me to rev above 4300 rpm when the eml is on would that be the problem and also what does the eco buttom do thanks Symptomatic of failing cam sensor (0340)
Back to top	TC Holder Maxscan GS500 OBDII code reader/EML resetter available.. IP Logged

Andy B Over Active Poster Offline Posts: 21988 Bury Lancs Gender: Drives: 1999 3.0 Elite auto/TDM	Re: Engine management light Reply #9 - 01. May 2011 at 20:38 richardw wrote on 01. May 2011 at 20:33: sorry do you mean air con didnt know i had that if you have an 'eco' button I'd say you have air conditioning Look for the compressor under the bonnet ........ I can't give you a clue as I've never owned a 4 pot.
Back to top	IP Logged

richardw Newbie Offline Posts: 9 Drives: Omega 2.0 GLS '97	Re: Engine management light Reply #10 - 01. May 2011 at 20:39 [/quote] Symptomatic of failing cam sensor (0340) [/quote] is that an expensive job
Back to top	IP Logged

RobG Omega Lord Offline I might have a link, pic or part number for that Posts: 7968 Bristol Gender: Drives: 53 plate 2.2 CD auto	Re: Engine management light Reply #11 - 01. May 2011 at 20:43 About £40 for the sensor (only get VX genuine) 15 minute job. Where are you located
Back to top	TC Holder Maxscan GS500 OBDII code reader/EML resetter available.. IP Logged

RobG

Omega Lord

Offline

I might have a link, pic
or part number for that

Posts: 7968
Bristol
Gender: male

Drives: 53 plate 2.2 CD auto

Re: Engine management light
Reply #12 - 01. May 2011 at 20:44

Andy B wrote on 01. May 2011 at 20:38:

richardw wrote on 01. May 2011 at 20:33:

sorry do you mean air con didnt know i had that

if you have an 'eco' button I'd say you have air conditioning Wink

Look for the compressor under the bonnet ........ I can't give you a clue as I've never owned a 4 pot. Wink

Same place as the abnormal engines Grin

bottom passenger side of aux belt run

TC Holder Maxscan GS500 OBDII code reader/EML resetter available..

IP Logged

richardw Newbie Offline Posts: 9 Drives: Omega 2.0 GLS '97	Re: Engine management light Reply #13 - 01. May 2011 at 20:46 im in leeds
Back to top	IP Logged

TheBoy Administrator Offline TBE has an MOT! Posts: 64817 Brackley, Northants Gender: Drives: 98 MV6, 03 Elite, 00 25, 89 ZX10	Re: Engine management light Reply #14 - 01. May 2011 at 20:47 Given the codes and the symptoms, cam sensor needs replacing. Geuine GM one needed. If you're near me, pop it over and I will show you. I suspect it may need crank sensor at some point, but lets do one thing at a time
Back to top	If you are going to kick a car, remember to wear appropriate footwear Any posts are the result of my own views as a member of OOF, which may or may not be the same as my views as part of the Admin Team. IP Logged

This is the old site. Please use the new site.

	Welcome, Guest. Please Login