This is the old site. Please use the new site.

  Welcome, Guest. Please Login
Omega Owners Forum
 
  Home Shop Help Search Members Login  
 

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

 
Page Index Toggle Pages: 1
Send Topic Print
Someone has already done this? (Read 860 times)
blackviper90210
Senior Member
****
Offline



Posts: 836
Bromsgrove, West Midlands
Gender: male

Drives: 1999 Omega Elite Estate 3.0 LPG
Someone has already done this?
03. May 2011 at 21:10
 
I'm sure not long ago, someone modded their mini facelift with a facelift bonnet & bumper. Can anyone direct me in that direction please?
Just curious how easy/difficult it is, also, can the facelift door mirrors be fitted on the mini facelift?

TIA Thumbs Up!
Back to top
 
 
IP Logged
 
Broomies Mate
Omega Knight
*****
Offline


Champagne Coloured Cars
Are Gay!

Posts: 1448
Bristol, UK
Gender: male

Drives: 97 BMW 535i V8
Re: Someone has already done this?
Reply #1 - 03. May 2011 at 21:13
 
Bonnet & Bumper.  Headlights are different, as are the trim pieces below the headlights.  The different headlight washer jets will have to be plumbed in too.

The good news is, everything should bolt on fine.
Back to top
 
 
IP Logged
 
RobG
Omega Lord
*******
Offline


I might have a link, pic
or part number for that

Posts: 7968
Bristol
Gender: male

Drives: 53 plate 2.2 CD auto
Re: Someone has already done this?
Reply #2 - 03. May 2011 at 21:22
 
1. Facelift Bumper
2. Facelift Bumper Beam
3. Bumper Foam (absorber)
4. Facelift Bumper Brackets + Nuts
5. Facelift washer bottle.
Bumper`s a tight fit but will go. The grille can be refitted, if you have the standard grille you can cut this down to make it fit back on, if you have the irmscher grille fitted you will have to slant the grille for it to sit properly and allow the bonnet to shut.
If fitting F/L bonnet I imagine you will need a new slam panel.
Door mirrors....straight swap

Back to top
« Last Edit: 03. May 2011 at 21:23 by RobG »  

TC Holder Maxscan GS500 OBDII code reader/EML resetter available..
 
IP Logged
 
blackviper90210
Senior Member
****
Offline



Posts: 836
Bromsgrove, West Midlands
Gender: male

Drives: 1999 Omega Elite Estate 3.0 LPG
Re: Someone has already done this?
Reply #3 - 03. May 2011 at 21:23
 
Broomies Mate wrote on 03. May 2011 at 21:13:
Bonnet & Bumper.  Headlights are different, as are the trim pieces below the headlights.  The different headlight washer jets will have to be plumbed in too.

The good news is, everything should bolt on fine.


Does the bonnet just bolt back in place and does the slam panel need to be "adjusted"?
Back to top
 
 
IP Logged
 
Andy B
Over Active Poster
*********
Offline



Posts: 21988
Bury Lancs
Gender: male

Drives: 1999 3.0 Elite auto/TDM
Re: Someone has already done this?
Reply #4 - 03. May 2011 at 21:24
 
blackviper90210 wrote on 03. May 2011 at 21:10:
I'm sure not long ago, someone modded their mini facelift with a facelift bonnet & bumper. Can anyone direct me in that direction please?
Just curious how easy/difficult it is, also, can the facelift door mirrors be fitted on the mini facelift?

TIA Thumbs Up!


Just buy an Astra G  Roll Eyes Roll Eyes Roll Eyes Roll Eyes Roll Eyes  Wink


Back to top
 
 
IP Logged
 
Andy B
Over Active Poster
*********
Offline



Posts: 21988
Bury Lancs
Gender: male

Drives: 1999 3.0 Elite auto/TDM
Re: Someone has already done this?
Reply #5 - 03. May 2011 at 21:25
 
blackviper90210 wrote on 03. May 2011 at 21:23:
... and does the slam panel need to be "adjusted"?


the slam panel is welded in  Wink
Back to top
 
 
IP Logged
 
RobG
Omega Lord
*******
Offline


I might have a link, pic
or part number for that

Posts: 7968
Bristol
Gender: male

Drives: 53 plate 2.2 CD auto
Re: Someone has already done this?
Reply #6 - 03. May 2011 at 21:26
 
Andy B wrote on 03. May 2011 at 21:25:
blackviper90210 wrote on 03. May 2011 at 21:23:
... and does the slam panel need to be "adjusted"?


the slam panel is welded in  Wink

With a million spot welds give or take a couple Grin Grin Grin
Back to top
 

TC Holder Maxscan GS500 OBDII code reader/EML resetter available..
 
IP Logged
 
blackviper90210
Senior Member
****
Offline



Posts: 836
Bromsgrove, West Midlands
Gender: male

Drives: 1999 Omega Elite Estate 3.0 LPG
Re: Someone has already done this?
Reply #7 - 03. May 2011 at 21:28
 
Andy B wrote on 03. May 2011 at 21:24:
blackviper90210 wrote on 03. May 2011 at 21:10:
I'm sure not long ago, someone modded their mini facelift with a facelift bonnet & bumper. Can anyone direct me in that direction please?
Just curious how easy/difficult it is, also, can the facelift door mirrors be fitted on the mini facelift?

TIA Thumbs Up!


Just buy an Astra G  Roll Eyes Roll Eyes Roll Eyes Roll Eyes Roll Eyes  Wink




Not in the same league as the mig though!  Grin Grin Grin
Back to top
 
 
IP Logged
 
Broomies Mate
Omega Knight
*****
Offline


Champagne Coloured Cars
Are Gay!

Posts: 1448
Bristol, UK
Gender: male

Drives: 97 BMW 535i V8
Re: Someone has already done this?
Reply #8 - 03. May 2011 at 21:29
 
Andy B wrote on 03. May 2011 at 21:24:
blackviper90210 wrote on 03. May 2011 at 21:10:
I'm sure not long ago, someone modded their mini facelift with a facelift bonnet & bumper. Can anyone direct me in that direction please?
Just curious how easy/difficult it is, also, can the facelift door mirrors be fitted on the mini facelift?

TIA Thumbs Up!


Just buy an Astra G  Roll Eyes Roll Eyes Roll Eyes Roll Eyes Roll Eyes  Wink




Too true!  Grin



As far as I know, the Slam Panel is the same and will accept the F/L Bonnet.
Back to top
 
 
IP Logged
 
Andy B
Over Active Poster
*********
Offline



Posts: 21988
Bury Lancs
Gender: male

Drives: 1999 3.0 Elite auto/TDM
Re: Someone has already done this?
Reply #9 - 03. May 2011 at 21:29
 
blackviper90210 wrote on 03. May 2011 at 21:28:
...

Not in the same league as the mig though!  Grin Grin Grin


Looks the same though as a facelift . Roll Eyes Roll Eyes Roll Eyes

Keep the pre facelift look, far nicer IMHO than the later cars.  Wink Wink
Back to top
 
 
IP Logged
 
RobG
Omega Lord
*******
Offline


I might have a link, pic
or part number for that

Posts: 7968
Bristol
Gender: male

Drives: 53 plate 2.2 CD auto
Re: Someone has already done this?
Reply #10 - 03. May 2011 at 21:30
 
blackviper90210 wrote on 03. May 2011 at 21:10:
I'm sure not long ago, someone modded their mini facelift with a facelift bonnet & bumper. Can anyone direct me in that direction please?
Just curious how easy/difficult it is, also, can the facelift door mirrors be fitted on the mini facelift?

TIA Thumbs Up!

Send Paul a PM. He`s done it http://www.omegaowners.com/forum/YaBB.pl?action=viewprofile;username=5146525F4F4...
Back to top
 

TC Holder Maxscan GS500 OBDII code reader/EML resetter available..
 
IP Logged
 
blackviper90210
Senior Member
****
Offline



Posts: 836
Bromsgrove, West Midlands
Gender: male

Drives: 1999 Omega Elite Estate 3.0 LPG
Re: Someone has already done this?
Reply #11 - 03. May 2011 at 21:31
 
RobG wrote on 03. May 2011 at 21:26:
Andy B wrote on 03. May 2011 at 21:25:
blackviper90210 wrote on 03. May 2011 at 21:23:
... and does the slam panel need to be "adjusted"?


the slam panel is welded in  Wink

With a million spot welds give or take a couple Grin Grin Grin


Well another point noted! I did say before that I know jack about cars/mechanics  Roll Eyes
If you don't know....ask  Thumbs Up!

Cheers RobG!!!!
Back to top
« Last Edit: 03. May 2011 at 21:32 by blackviper90210 »  
 
IP Logged
 
Andy B
Over Active Poster
*********
Offline



Posts: 21988
Bury Lancs
Gender: male

Drives: 1999 3.0 Elite auto/TDM
Re: Someone has already done this?
Reply #12 - 03. May 2011 at 21:33
 
Broomies Mate wrote on 03. May 2011 at 21:29:
.....
As far as I know, the Slam Panel is the same and will accept the F/L Bonnet.


both cars are the same underneath (rear wings excepted).
The swap has been done both ways. There are/used to be pictures of a OOFers prefacelift with facelift bonnet, bumpers etc fitted and also a few months ago a facelift car on Autotrader/eBay that had had a front end bump repaired with a preface lift front end. The seller apparently knew nothing about it  Huh Huh Grin Grin
Back to top
 
 
IP Logged
 
blackviper90210
Senior Member
****
Offline



Posts: 836
Bromsgrove, West Midlands
Gender: male

Drives: 1999 Omega Elite Estate 3.0 LPG
Re: Someone has already done this?
Reply #13 - 03. May 2011 at 21:41
 
RobG wrote on 03. May 2011 at 21:30:
blackviper90210 wrote on 03. May 2011 at 21:10:
I'm sure not long ago, someone modded their mini facelift with a facelift bonnet & bumper. Can anyone direct me in that direction please?
Just curious how easy/difficult it is, also, can the facelift door mirrors be fitted on the mini facelift?

TIA Thumbs Up!

Send Paul a PM. He`s done it http://www.omegaowners.com/forum/YaBB.pl?action=viewprofile;username=5146525F4F4...


Sent him a PM, cheers!  Thumbs Up!
Back to top
 
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print

This is the old site. Please use the new site.