This is the old site. Please use the new site.

  Welcome, Guest. Please Login
Omega Owners Forum
 
  Home Shop Help Search Members Login  
 

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

 
Page Index Toggle Pages: 1
Send Topic Print
Intermittant starting problem, (Read 662 times)
alfie
Intermediate Member
***
Offline



Posts: 409
Gwent
Gender: male

Drives: 2.5 cdx
Intermittant starting problem,
05. May 2011 at 16:16
 
Problem starting sometimes,engine cranks over,plenty of battery power,but will not fire.
Seems that there is no fuel geting through,but if I bump start it,it fires up straight away,I'm pulling my hair out trying to suss out the fault.
Like I said this only happens now and then,its really a pain in the butt trying to pin it down,no engine management lights on.
Could it be the fuel pump? .
Back to top
 
 
IP Logged
 
henryd
Omega Baron
******
Offline



Posts: 2172
west cornwall
Gender: male

Drives: Merc E220 estate,previous ride 2.5 elite estate
Re: Intermittant starting problem,
Reply #1 - 05. May 2011 at 16:19
 
try the paper clip to see what codes you have stored,crank sensor could cause this and may not throw up a code
Back to top
 

other drives Fiat ulysses 2.0 16v
                    peugeot 406 hdi 110
                    Fiesta 1.3 encore yuk
swift utopia to slow the mig down a bit !!

v6 lock kit available locally
 
IP Logged
 
Greeny18
Newbie
*
Offline



Posts: 22
Sandy, Beds
Gender: male

Drives: Omega 2.6 CDx Estate
Re: Intermittant starting problem,
Reply #2 - 05. May 2011 at 16:19
 
Does it start from cold ok and then has problems warm/hot
Back to top
 
 
IP Logged
 
Psychoca
Senior Member
****
Offline



Posts: 716
Peterborough
Gender: male

Drives: Omega 2.5TD Estate (chipped)
Re: Intermittant starting problem,
Reply #3 - 05. May 2011 at 18:27
 
Is it petrol or diesel???

If it is a hot engine and diesel, it could well be hot start issue...  If it is anytime (either petrol or diesel), then get your codes (paperclip trick in maintenance guides) and expect to see code 19 for the crank sensor...
Back to top
 
 
IP Logged
 
blob
Newbie
*
Offline



Posts: 28
london
Gender: male

Drives: Omega B 3.0L Elite/Sabb95 2.3L
Re: Intermittant starting problem,
Reply #4 - 05. May 2011 at 19:07
 
i have got the same problem but it wont start fro cold fine when hot.i thought crank sensor would not start from hot??
Back to top
 
 
IP Logged
 
alfie
Intermediate Member
***
Offline



Posts: 409
Gwent
Gender: male

Drives: 2.5 cdx
Re: Intermittant starting problem,
Reply #5 - 05. May 2011 at 20:36
 
Crank sensor was replaced about 2 yrs ago,no smell of petrol when it refuse's to fire,hot or cold no different.As I said it only happens now and then.
I'll try the paperclip test over the weekend,I've never done that before through.
It only needs a tow a few yards before it starts,so it's really baffling me.
                            Thanks for suggestions
                                   Alfie.
Back to top
 
 
IP Logged
 
alfie
Intermediate Member
***
Offline



Posts: 409
Gwent
Gender: male

Drives: 2.5 cdx
Re: Intermittant starting problem,
Reply #6 - 05. May 2011 at 20:52
 
Please could someone point me towards how to do the paperclip test,never done one before.
Back to top
 
 
IP Logged
 
Entwood
Omega King
********
Offline


Quietly Confident

Posts: 13708
North Wiltshire
Gender: male

Drives: 3.2 Elite (with LPG)
Re: Intermittant starting problem,
Reply #7 - 05. May 2011 at 21:00
 
alfie wrote on 05. May 2011 at 20:52:
Please could someone point me towards how to do the paperclip test,never done one before.



http://www.omegaowners.com/forum/YaBB.pl?num=1189022687

Smiley
Back to top
 

V6 Cam locking/setting kit, Maxscan GS500 OBDII code reader/EML resetter available.   Click for some Pictures
 
IP Logged
 
alfie
Intermediate Member
***
Offline



Posts: 409
Gwent
Gender: male

Drives: 2.5 cdx
Re: Intermittant starting problem,
Reply #8 - 06. May 2011 at 07:42
 
Thanks,that seems simple enough even for me.
Back to top
 
 
IP Logged
 
alfie
Intermediate Member
***
Offline



Posts: 409
Gwent
Gender: male

Drives: 2.5 cdx
Re: Intermittant starting problem,
Reply #9 - 07. May 2011 at 21:20
 
Sorted,tried the paper clip trick,got a code 19.
the cable connecter was at fault,wasn't fully clicked into each other. Cleaned it up,resecured with a new tie and all ok.
    Thanks for the help.
              Alfie.
Back to top
 
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print

This is the old site. Please use the new site.