07. Apr 2026 at 18:11

	Welcome, Guest. Please Login

Shop

Help

Members

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

Omega Owners Forum › Omega Help › Omega General Help › Omega sump depth? v6!

‹ Previous Topic | Next Topic ›

Pages: 1

Omega sump depth? v6! (Read 1009 times)

michaelprg Newbie Offline Posts: 29 boston, Lincolnshire Gender: Drives: haynes roadster	Omega sump depth? v6! 08. May 2011 at 15:28 hallo! I have a quick question! or 2!! I need to know the depth of the sump from the engine mating face to the most deepest point (external) and also the width of the sump wing I would greatly appreciate if some one could tell me these dimensions Many thanks Michael
Back to top	« Last Edit: 08. May 2011 at 16:46 by michaelprg » IP Logged

Abiton Omega Knight Offline Posts: 1064 Under Bonnet, nr Abingdon Gender: Drives: Mk2 Golf, but the missus has a '96 2.0 'Select' woohoo!	Re: Omega sump depth? Reply #1 - 08. May 2011 at 16:42 Which engine?
Back to top	People are just about as happy as they have a mind to be. Abraham Lincoln IP Logged

michaelprg Newbie Offline Posts: 29 boston, Lincolnshire Gender: Drives: haynes roadster	Re: Omega sump depth? Reply #2 - 08. May 2011 at 16:46 AH yeah sorry! v6!
Back to top	IP Logged

michaelprg Newbie Offline Posts: 29 boston, Lincolnshire Gender: Drives: haynes roadster	Re: Omega sump depth? v6! Reply #3 - 08. May 2011 at 22:46 anyone?
Back to top	IP Logged

Albs Omega King Offline The upgrades are ongoing. Posts: 15083 North Essex Gender: Drives: 2000 2.5CD with LPG/Honda cbr600 FX	Re: Omega sump depth? v6! Reply #4 - 08. May 2011 at 23:07 Are you including the alloy sandwich plate between the sump and block in your calculations ? I dont know the answer to your question by the way.
Back to top	Breaking - facelift 2.5 Elite.in Z20H Blue. PM your parts requirements. IP Logged

michaelprg

Newbie

Offline

Posts: 29
boston, Lincolnshire
Gender: male

Drives: haynes roadster

Re: Omega sump depth? v6!
Reply #5 - 09. May 2011 at 00:07

Albs wrote on 08. May 2011 at 23:07:

Are you including the alloy sandwich plate between the sump and block in your calculations ?
I dont know the answer to your question by the way.

Yeah

its a pain to be honest i need to find out as i don't have my engine yet and i need to make my gear tunnel and without knowing my desired engine height its just a ball lake haha!

If your wondering i'm building a kit car

IP Logged

Albs Omega King Offline The upgrades are ongoing. Posts: 15083 North Essex Gender: Drives: 2000 2.5CD with LPG/Honda cbr600 FX	Re: Omega sump depth? v6! Reply #6 - 09. May 2011 at 00:11 I will try and remember to measure it tomorrow and post up my findings.
Back to top	Breaking - facelift 2.5 Elite.in Z20H Blue. PM your parts requirements. IP Logged

michaelprg Newbie Offline Posts: 29 boston, Lincolnshire Gender: Drives: haynes roadster	Re: Omega sump depth? v6! Reply #7 - 09. May 2011 at 00:12 Many thanks in advance!! will be a huge help!! Cheers Michael
Back to top	IP Logged

Albs Omega King Offline The upgrades are ongoing. Posts: 15083 North Essex Gender: Drives: 2000 2.5CD with LPG/Honda cbr600 FX	Re: Omega sump depth? v6! Reply #8 - 10. May 2011 at 09:58 OK - The widest part of the sump (front) is 470mm From the bottom of the block to trhe bottom of the sump is 140mm (including the alloy part between bottom of block and top of sump. The sump on its own is only approx. 45mm deep. Hope that is of some help.
Back to top	Breaking - facelift 2.5 Elite.in Z20H Blue. PM your parts requirements. IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

This is the old site. Please use the new site.

« Home

‹ Board

Top of this page