07. Apr 2026 at 12:43

	Welcome, Guest. Please Login

Shop

Help

Members

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

Omega Owners Forum › Omega Help › Omega General Help › Sizes of seals / O-rings / dowty washers

‹ Previous Topic | Next Topic ›

Pages: 1

Sizes of seals / O-rings / dowty washers (Read 1536 times)

kcl

Senior Member

Offline

Posts: 696
Finland
Gender: male

Drives: 2002 Opel Omega 2,6 Caravan Auto

Sizes of seals / O-rings / dowty washers
10. May 2011 at 07:45

For a start, going to the "marbel-counter" is not an option for a reason. Thumbs Up!

Does anyone have the dimensions for oil cooler O-rings and coolant bridge seals? I know the dowtys for cooler are 16,2x19,9 mm and the banjo bolts should be 16x1,5x28 with two 7,5mm holes but what size are the O-rings? And the coolant bridge seals?

Also, the grey goo: is there a Loctite product that is the same or can be used?

« Last Edit: 10. May 2011 at 07:47 by kcl »

IP Logged

Mantahatch

Omega Knight

Offline

Posts: 1637
Gender: male

Re: Sizes of seals / O-rings / dowty washers
Reply #1 - 10. May 2011 at 09:31

I first used the original seals sourced from Vauxhall dealer on the coolant bridge and oil cooler. But for some reason I had a leak on the oil cooler banjo bolts. So I used dowty type seals on both coolant bridhe and oil cooler.

I have the O rings at home and can measure them this evening. ButI am sure someone will no the measurements before this evening.

IP Logged

kcl Senior Member Offline Posts: 696 Finland Gender: Drives: 2002 Opel Omega 2,6 Caravan Auto	Re: Sizes of seals / O-rings / dowty washers Reply #2 - 10. May 2011 at 10:30 That would be very helpful from you, thanks. I have usit -seals available (brand for dowty-type washers) as well as o-rings, hence the question. Anyone for the grey sealant? What "commercial" product is the same?
Back to top	IP Logged

Martin Imber Over Active Poster Offline LPG Omega V6 - Keyfobs Rebuilt Posts: 20110 Worcester Gender: Drives: 2001 Omega 2.6CD LPG & 3.0 cams	Re: Sizes of seals / O-rings / dowty washers Reply #3 - 10. May 2011 at 16:49 Can Andy parts man post them to you?
Back to top	The other tuned 2.6. DIY LPG, towbar, upgrade ICE & Wing Spoiler, Air shocks, Eibach Pro Springs, Poly WB bushes, WIM setup, HID conversion, 3.0 cams, ported ect. IP Logged

Mantahatch Omega Knight Offline Posts: 1637 Gender:	Re: Sizes of seals / O-rings / dowty washers Reply #4 - 10. May 2011 at 17:53 Just got in from work. bit awkward to measure but 25mm to 26mm outside diameter. 2mm thickness and 22mm internal diameter. I have the standard O rng kit from RS Components and there is not an equivilant in the kit. But I am sure they would be available.
Back to top	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

This is the old site. Please use the new site.

« Home

‹ Board

Top of this page