This is the old site. Please use the new site.

  Welcome, Guest. Please Login
Omega Owners Forum
 
  Home Shop Help Search Members Login  
 

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

 
Page Index Toggle Pages: 1
Send Topic Print
P.S. problem after MOT (Read 253 times)
geoffr70
Omega Knight
*****
Offline


Join the 3 litre club!
Then the 10.5 l club
woo!

Posts: 1881
Sunderland
Gender: male

Drives: 2000 f/l 3.0 Elite Saloon auto, 2000 f/l 3.0 MV6 Saloon manual,  Dennis RS133 (occasionally!)
P.S. problem after MOT
12. May 2011 at 21:40
 
Hi peeps. My 3.0 auto elite has only on a handful of times in the past showed any signs of a weak power steering pump, like very stiff at low revs and almost no assistance at engine idle.

I replaced the fluid after I did my ABS ECU, and it hasn't done the same since. I never give the steering stick, i.e. lock to lock fast, static steering etc.

After its test the steering was rock hard when I first pulled away, then when I gave it some revs got better, but it's been stiffer than normal ever since. To get the cars in and out the test bay requires full lock, and it is very tight.

Does anyone think this has caused it? I'm not going to go and chase them demanding a new pump etc, just curious, it seems like too much of a coincidence.

Also, I know it's been discussed before, but what is the weak point in the pumps? It's ok most of the time. I heard that the relay could be shot,, but surely if that's the case it would be duff all the time? I also heard they're £90 Undecided I have an unknown spare pump.

Thanks peeps
Back to top
 

TC and BnQ Trade holder.
I'll out pull you with my caravan!
 
IP Logged
 
ndmv6
Newbie
*
Offline



Posts: 42

Drives: omega 2.2 cd auto
Re: P.S. problem after MOT
Reply #1 - 12. May 2011 at 21:43
 
sounds like a worn out pump,had a cavalier with similar symptoms no assistance at low revs ,changed pump,all was well again..
Back to top
 
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print

This is the old site. Please use the new site.