06. Apr 2026 at 14:16

	Welcome, Guest. Please Login

Shop

Help

Members

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

Omega Owners Forum › Omega Help › Omega General Help › re programming of the multi information display

‹ Previous Topic | Next Topic ›

Pages: 1

re programming of the multi information display (Read 513 times)

Markone

Newbie

Offline

Posts: 2

Drives: Omega 2.2cd

re programming of the multi information display
12. May 2011 at 21:47

Hi can anyone help here?

I have recently put a new battery on my car as it has been unused and something keeps draining it. The multifunction info display now just says programme and the reset button on the washer lever doesnt seem to do anything. Its not a major problem given that all the electrics work fine, the car has just sailed through its MOT and I love driving it anyway but it would be nice to have all the information working as it should. I have been through the manual but cant seem to find any literature that advises of a solution. I would be really grateful if someone had the answer. Many thanks

IP Logged

Jimbob Global Moderator Admin Team Offline Third nipple removal completed succesfuly Posts: 20462 Chester / Flintshire Gender: Drives: 52 3.2 MV6 Estate & 98 3.0 MV6 Manual Estate	Re: re programming of the multi information display Reply #1 - 13. May 2011 at 07:37 Thats a new one on me sorry.
Back to top	Maintenance Guides & Code Reading FAQ & Common Questions IP Logged

TheBoy

Administrator

Offline

TBE has an MOT!

Posts: 64817
Brackley, Northants
Gender: male

Drives: 98 MV6, 03 Elite, 00 25, 89 ZX10

Re: re programming of the multi information display
Reply #2 - 13. May 2011 at 10:17

- its lost its configuration from its flash memory. Never, ever seen that, only seen that with a brand new one.

Tech2 job, assuming the MID isn't faulty.

Where are you, as if you go to a dealer, might be cheaper to buy a 2nd hand MID from here (later type are reliable, 2nd hand is fine - BUT it must be from same engine/gearbox/headlight/tyre configuration)

If you are going to kick a car, remember to wear appropriate footwear
Any posts are the result of my own views as a member of OOF, which may or may not be the same as my views as part of the Admin Team.

IP Logged

Markone Newbie Offline Posts: 2 Drives: Omega 2.2cd	Re: re programming of the multi information display Reply #3 - 13. May 2011 at 21:45 Hi, I am in lincolnshire, My car is an X plate 2.2CD. Thanks for your help I really appreciate it.
Back to top	IP Logged

TheBoy Administrator Offline TBE has an MOT! Posts: 64817 Brackley, Northants Gender: Drives: 98 MV6, 03 Elite, 00 25, 89 ZX10	Re: re programming of the multi information display Reply #4 - 14. May 2011 at 12:23 Markone wrote on 13. May 2011 at 21:45: Hi, I am in lincolnshire, My car is an X plate 2.2CD. Thanks for your help I really appreciate it. Now far are you from Nottingham? Marks DTM Calib has a Tech2, and knows how to use it (which immediately makes him better than any dealer)
Back to top	If you are going to kick a car, remember to wear appropriate footwear Any posts are the result of my own views as a member of OOF, which may or may not be the same as my views as part of the Admin Team. IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

This is the old site. Please use the new site.

« Home

‹ Board

Top of this page