24. Apr 2025 at 13:03

	Welcome, Guest. Please Login

Shop

Help

Members

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

Omega Owners Forum › Omega Help › Omega General Help › Cam gasket problem

‹ Previous Topic | Next Topic ›

Pages: 1

Cam gasket problem (Read 420 times)

henri Junior Member Offline Posts: 65 Vendee France near La Sable D' Gender: Drives: 2003 omega cdx 2.6	Cam gasket problem 27. May 2011 at 15:48 Need some help guys ,Started the strip down to replace gaskets got as far as taking the plenum off and had to stop have had an emergency come up so had to put everything back. Started the engine and the emissions light is staying on,not blinking,constant,have not driven anywhere yet so dont know if it will go off.What have I done wrong?
Back to top	IP Logged

JamesV6CDX Omega Baron Offline Posts: 3202 Gloucestershire Gender: Drives: 2002 (02) 3.2 Retail MV6 in Star Silver with Leather	Re: Cam gasket problem Reply #1 - 27. May 2011 at 16:34 My money is on you not reconnecting either A - Front drive by wire connector B - Rear multiram connector Does it rev when you press the go pedal? If no, then A is your fault. Otherwise it's probably B! Less likely, are all the O rings seated, just thinking you may have introduced an airleak? Cheers, James
Back to top	www.omegamechanic.co.uk - Mobile Mechanics Service in support of Help for Heroes. IP Logged

henri

Junior Member

Offline

Posts: 65
Vendee France near La Sable D'
Gender: male

Drives: 2003 omega cdx 2.6

Re: Cam gasket problem
Reply #2 - 28. May 2011 at 13:32

JamesV6CDX wrote on 27. May 2011 at 16:34:

My money is on you not reconnecting either

A - Front drive by wire connector
B - Rear multiram connector

Does it rev when you press the go pedal? If no, then A is your fault.

Otherwise it's probably B!

Less likely, are all the O rings seated, just thinking you may have introduced an airleak?

Cheers,
James

Thanks for the advice James,checked the items you mentioned and all connected,loosed the torque bolts slightly and retightened ,left it overnight and the next day when I started the light went out as normal so fingers crossed the problems gone lol Thumbs Up!

IP Logged

chrisgixer Omega King Offline Black ones are faster. Posts: 14570 Wokingham Gender: Drives: "Omega Black" 3.2 Elite. Thanks to Joshwyatt.	Re: Cam gasket problem Reply #3 - 29. May 2011 at 07:49 Pedal trick for fault code.
Back to top	« Last Edit: 29. May 2011 at 07:50 by chrisgixer » IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

This is the old site. Please use the new site.

« Home

‹ Board

Top of this page