21. Feb 2026 at 14:54

	Welcome, Guest. Please Login

Shop

Help

Members

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

Omega Owners Forum › Omega Help › Omega General Help › New key fob

‹ Previous Topic | Next Topic ›

Pages: 1 2

New key fob (Read 2053 times)

Bob G Junior Member Offline Posts: 79 Gloucester Gender: Drives: 2.0 L GLS X Reg	Re: New key fob Reply #15 - 24. Aug 2011 at 22:12 TheBoy wrote on 24. Aug 2011 at 20:23: The gallery pics, at a glance, look like 2.2 You mean my gallery pics will check the engine number in the morning that should solve something
Back to top	IP Logged

TheBoy Administrator Offline TBE has an MOT! Posts: 64817 Brackley, Northants Gender: Drives: 98 MV6, 03 Elite, 00 25, 89 ZX10	Re: New key fob Reply #16 - 24. Aug 2011 at 22:22 Bob G wrote on 24. Aug 2011 at 22:12: TheBoy wrote on 24. Aug 2011 at 20:23: The gallery pics, at a glance, look like 2.2 You mean my gallery pics will check the engine number in the morning that should solve something It is difficult to tell them (2.0 and 2.2) apart, and the resolution isn't high enough to zoom in enough
Back to top	If you are going to kick a car, remember to wear appropriate footwear Any posts are the result of my own views as a member of OOF, which may or may not be the same as my views as part of the Admin Team. IP Logged

Bob G

Junior Member

Offline

Posts: 79
Gloucester
Gender: male

Drives: 2.0 L GLS X Reg

Re: New key fob
Reply #17 - 24. Aug 2011 at 22:38

TheBoy wrote on 24. Aug 2011 at 22:22:

Bob G wrote on 24. Aug 2011 at 22:12:

TheBoy wrote on 24. Aug 2011 at 20:23:

The gallery pics, at a glance, look like 2.2 Undecided

You mean my gallery pics Shocked

will check the engine number in the morning that should solve something

It is difficult to tell them (2.0 and 2.2) apart, and the resolution isn't high enough to zoom in enough

Did not realise that, pics were 12mill pixels, if it has had an engine swop then suppose I could have problems as it seesms no one told DVLA, just what I need. Ho hum what fun, and I thought owning a cossie scorpio was fun. Grin

IP Logged

Andy B Over Active Poster Offline Posts: 21988 Bury Lancs Gender: Drives: 1999 3.0 Elite auto/TDM	Re: New key fob Reply #18 - 24. Aug 2011 at 22:40 TheBoy wrote on 24. Aug 2011 at 22:22: .... It is difficult to tell them (2.0 and 2.2) apart, and the resolution isn't high enough to zoom in enough Doesn't the 2.0 use a DIS pack & HT leads while a 2.2 use a coil pack directly onto the plugs?
Back to top	IP Logged

RobG Omega Lord Offline I might have a link, pic or part number for that Posts: 7968 Bristol Gender: Drives: 53 plate 2.2 CD auto	Re: New key fob Reply #19 - 24. Aug 2011 at 23:02 Andy B wrote on 24. Aug 2011 at 22:40: TheBoy wrote on 24. Aug 2011 at 22:22: .... It is difficult to tell them (2.0 and 2.2) apart, and the resolution isn't high enough to zoom in enough Doesn't the 2.0 use a DIS pack & HT leads while a 2.2 use a coil pack directly onto the plugs? Yep
Back to top	TC Holder Maxscan GS500 OBDII code reader/EML resetter available.. IP Logged

Martin Imber

Over Active Poster

Offline

LPG Omega V6 - Keyfobs
Rebuilt

Posts: 20110
Worcester
Gender: male

Drives: 2001 Omega 2.6CD LPG & 3.0 cams

Re: New key fob
Reply #20 - 24. Aug 2011 at 23:47

Bob G wrote on 24. Aug 2011 at 19:43:

Yes the internals were a black soggy mess so new internals

I thought that as it is a facelift it would not need anything else, it does not have a throttle cable as illustrated in the how to section so assumed that all was well, obviously not Sad

what else is needed)
Guess key will be a Newent job then I hope

Can be repaired.

Remove switches

Clean with meths

Fit new switches

The other tuned 2.6. DIY LPG, towbar, upgrade ICE & Wing Spoiler, Air shocks, Eibach Pro Springs, Poly WB bushes, WIM setup, HID conversion, 3.0 cams, ported ect.

IP Logged

Bob G Junior Member Offline Posts: 79 Gloucester Gender: Drives: 2.0 L GLS X Reg	Re: New key fob Reply #21 - 25. Aug 2011 at 08:57 Martin appreciate that but the board was so badly dmaged by whatever had melted, new internals were by far easier. It had made parts very fragile so gave up
Back to top	IP Logged

Bob G

Junior Member

Offline

Posts: 79
Gloucester
Gender: male

Drives: 2.0 L GLS X Reg

Re: New key fob
Reply #22 - 25. Aug 2011 at 09:01

Ok carrying on from last night I confirm it is the engine that should be there, it has HT leads at the rear and although time is short I think I have found the linkage, as said it is well hidden.

Now we have confirmed that and I know what parts to obtain is the job still very much as per the insructios as posted except modify for 2L?

Sorry to have caued so many posts but I was totally convinced it was fully servo served, but always prepared to be proved wrong if it helps, thanks for you patience and do hope to see some of you at Newent, now if anyone going happend to have above spares Grin

IP Logged

Jimbob Global Moderator Admin Team Offline Third nipple removal completed succesfuly Posts: 20462 Chester / Flintshire Gender: Drives: 52 3.2 MV6 Estate & 98 3.0 MV6 Manual Estate	Re: New key fob Reply #23 - 25. Aug 2011 at 09:04 If it helps...I think A vectra cruise setup also fits
Back to top	Maintenance Guides & Code Reading FAQ & Common Questions IP Logged

Pages: 1 2

‹ Previous Topic | Next Topic ›

This is the old site. Please use the new site.

« Home

‹ Board

Top of this page