Omega Owners Forum - New key fob

Bob G Junior Member Offline Posts: 79 Gloucester Gender: Drives: 2.0 L GLS X Reg	New key fob 24. Aug 2011 at 18:56 had to replace the key fob that came with car, does the new one need Tec2 programming? key is orginal with transponder and still works
Back to top	IP Logged

RobG Omega Lord Offline I might have a link, pic or part number for that Posts: 7968 Bristol Gender: Drives: 53 plate 2.2 CD auto	Re: New key fob Reply #1 - 24. Aug 2011 at 18:58 Bob G wrote on 24. Aug 2011 at 18:56: had to replace the key fob that came with car, does the new one need Tec2 programming? key is orginal with transponder and still works Just the casing, no. New internals in the fob, yes. Bob, being a 2.0 you will need everything for cruise not just a stalk. Need to find a 2.0 CDX as a donor
Back to top	« Last Edit: 24. Aug 2011 at 19:02 by RobG » TC Holder Maxscan GS500 OBDII code reader/EML resetter available.. IP Logged

Bob G Junior Member Offline Posts: 79 Gloucester Gender: Drives: 2.0 L GLS X Reg	Re: New key fob Reply #2 - 24. Aug 2011 at 19:43 Yes the internals were a black soggy mess so new internals I thought that as it is a facelift it would not need anything else, it does not have a throttle cable as illustrated in the how to section so assumed that all was well, obviously not what else is needed) Guess key will be a Newent job then I hope
Back to top	IP Logged

RobG Omega Lord Offline I might have a link, pic or part number for that Posts: 7968 Bristol Gender: Drives: 53 plate 2.2 CD auto	Re: New key fob Reply #3 - 24. Aug 2011 at 19:47 Cruise motor with bowden cable, bracket on throttle body for the cable and ideally the mounting bracket for the cruise motor. You will only get this from a 2.0 CDX spec
Back to top	TC Holder Maxscan GS500 OBDII code reader/EML resetter available.. IP Logged

TheBoy

Administrator

Offline

TBE has an MOT!

Posts: 64817
Brackley, Northants
Gender: male

Drives: 98 MV6, 03 Elite, 00 25, 89 ZX10

Re: New key fob
Reply #4 - 24. Aug 2011 at 20:20

Bob G wrote on 24. Aug 2011 at 19:43:

Yes the internals were a black soggy mess so new internals

I thought that as it is a facelift it would not need anything else, it does not have a throttle cable as illustrated in the how to section so assumed that all was well, obviously not Sad

what else is needed)
Guess key will be a Newent job then I hope

You sure no throttle cable?

Back to top

If you are going to kick a car, remember to wear appropriate footwear
Any posts are the result of my own views as a member of OOF, which may or may not be the same as my views as part of the Admin Team.

IP Logged

TheBoy Administrator Offline TBE has an MOT! Posts: 64817 Brackley, Northants Gender: Drives: 98 MV6, 03 Elite, 00 25, 89 ZX10	Re: New key fob Reply #5 - 24. Aug 2011 at 20:23 The gallery pics, at a glance, look like 2.2
Back to top	If you are going to kick a car, remember to wear appropriate footwear Any posts are the result of my own views as a member of OOF, which may or may not be the same as my views as part of the Admin Team. IP Logged

Bob G

Junior Member

Offline

Posts: 79
Gloucester
Gender: male

Drives: 2.0 L GLS X Reg

Re: New key fob
Reply #6 - 24. Aug 2011 at 20:27

TheBoy wrote on 24. Aug 2011 at 20:20:

Bob G wrote on 24. Aug 2011 at 19:43:

Yes the internals were a black soggy mess so new internals

I thought that as it is a facelift it would not need anything else, it does not have a throttle cable as illustrated in the how to section so assumed that all was well, obviously not Sad

what else is needed)
Guess key will be a Newent job then I hope

You sure no throttle cable?

Well two of us searched in vain today and can find nothing, assuming that we are looking in correct location, left of engine as you view from front, other person looking is ex AA and does know his stuff but we are prepared to be wrong Cheesy

Back to top

IP Logged

Andy B

Over Active Poster

Offline

Posts: 21988
Bury Lancs
Gender: male

Drives: 1999 3.0 Elite auto/TDM

Re: New key fob
Reply #7 - 24. Aug 2011 at 20:27

TheBoy wrote on 24. Aug 2011 at 20:20:

Bob G wrote on 24. Aug 2011 at 19:43:

Yes the internals were a black soggy mess so new internals

I thought that as it is a facelift it would not need anything else, it does not have a throttle cable as illustrated in the how to section so assumed that all was well, obviously not Sad

what else is needed)
Guess key will be a Newent job then I hope

You sure no throttle cable?

That confused me too. If his car has no throttle cable, where would the bowden cable of a cruise control kit fit? Huh

Back to top

IP Logged

Jimbob Global Moderator Admin Team Offline Third nipple removal completed succesfuly Posts: 20462 Chester / Flintshire Gender: Drives: 52 3.2 MV6 Estate & 98 3.0 MV6 Manual Estate	Re: New key fob Reply #8 - 24. Aug 2011 at 20:27 TheBoy wrote on 24. Aug 2011 at 20:23: The gallery pics, at a glance, look like 2.2 agreed - no flame trap as per 2.0
Back to top	Maintenance Guides & Code Reading FAQ & Common Questions IP Logged

Jimbob Global Moderator Admin Team Offline Third nipple removal completed succesfuly Posts: 20462 Chester / Flintshire Gender: Drives: 52 3.2 MV6 Estate & 98 3.0 MV6 Manual Estate	Re: New key fob Reply #9 - 24. Aug 2011 at 20:29 ok... why do you think its a 2.0? pm me your reg please, Ill check what it should be
Back to top	Maintenance Guides & Code Reading FAQ & Common Questions IP Logged

RobG Omega Lord Offline I might have a link, pic or part number for that Posts: 7968 Bristol Gender: Drives: 53 plate 2.2 CD auto	Re: New key fob Reply #10 - 24. Aug 2011 at 21:02 2.0ltr. Look at OP`s engine pic in gallery
Back to top	TC Holder Maxscan GS500 OBDII code reader/EML resetter available.. IP Logged

Jimbob Global Moderator Admin Team Offline Third nipple removal completed succesfuly Posts: 20462 Chester / Flintshire Gender: Drives: 52 3.2 MV6 Estate & 98 3.0 MV6 Manual Estate	Re: New key fob Reply #11 - 24. Aug 2011 at 21:02 Well just checked, and this left VX with a 2 Litre. X20XEV serial number 31105679 who knows whats happened since then though
Back to top	Maintenance Guides & Code Reading FAQ & Common Questions IP Logged

Bob G Junior Member Offline Posts: 79 Gloucester Gender: Drives: 2.0 L GLS X Reg	Re: New key fob Reply #12 - 24. Aug 2011 at 21:06 pic of my engine in the gallery, i think that best way forward is to wait till newent and then let those in the know look, but i am blowed if i can see a throttle cable.
Back to top	IP Logged

RobG Omega Lord Offline I might have a link, pic or part number for that Posts: 7968 Bristol Gender: Drives: 53 plate 2.2 CD auto	Re: New key fob Reply #13 - 24. Aug 2011 at 21:14 It emerges from the bulkhead, you won`t see it at the throttle body unless you remove the air intake pipe (big black fat one on top of TB)
Back to top	TC Holder Maxscan GS500 OBDII code reader/EML resetter available.. IP Logged

Bob G Junior Member Offline Posts: 79 Gloucester Gender: Drives: 2.0 L GLS X Reg	Re: New key fob Reply #14 - 24. Aug 2011 at 21:17 ok Rob wil try that tommorow.
Back to top	IP Logged

This is the old site. Please use the new site.

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

This is the old site. Please use the new site.

	Welcome, Guest. Please Login