This is the old site. Please use the new site.

 
13. Feb 2026 at 14:27
  
  Welcome, Guest. Please Login
 Omega Owners Forum
 
 
  Home Shop Help Search Members Login  
 

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

 
  Omega Owners Forum › Omega Help › Omega General Help › help car not start
‹ Previous Topic | Next Topic ›
Pages: 1 2 3 
Send Topic Print
help car not start (Read 3337 times)
mick-1975
Senior Member
****
Offline



Posts: 592
nottingham
Gender: male

Drives: 2.2 estate auto
Re: help car not start
Reply #30 - 31. Aug 2011 at 12:21  
checked round the filter all seems to be ok cant see anything out of place
Back to top
 
mick-1975  
IP Logged
 
RobG
Omega Lord
*******
Offline


I might have a link, pic
or part number for that

Posts: 7968
Bristol
Gender: male

Drives: 53 plate 2.2 CD auto
Re: help car not start
Reply #31 - 31. Aug 2011 at 12:26  
Either put a jumper from ECU pin 3 to pin 2 or remove the fuel pump relay and bridge the two contacts with a short wire link with two spade connectors attached and get someone to crank engine while you listen for the pump. Failing that, apply 12v direct to the pump
Back to top
 
TC Holder Maxscan GS500 OBDII code reader/EML resetter available..
 
IP Logged
 
RobG
Omega Lord
*******
Offline


I might have a link, pic
or part number for that

Posts: 7968
Bristol
Gender: male

Drives: 53 plate 2.2 CD auto
Re: help car not start
Reply #32 - 31. Aug 2011 at 12:40  
taxi al wrote on 29. Aug 2011 at 19:39:
Fuel pump easy enough to change on an estate. Cheap ish too, 'bout £50 iirc. Thumbs Up!

Being an auto, could it be the selector switch? Undecided

And the rest Shocked
Back to top
 
TC Holder Maxscan GS500 OBDII code reader/EML resetter available..
 
IP Logged
 
mick-1975
Senior Member
****
Offline



Posts: 592
nottingham
Gender: male

Drives: 2.2 estate auto
Re: help car not start
Reply #33 - 31. Aug 2011 at 12:41  
ive ordered a crank sensor as people are telling me that it could be the problem .as someone a friend knows had the same problem and he changed the sensor so just got to wait for it to arrive in stock . i shall do as you say and try that .

if not think it be towed to main deeler im affraid or scrap . as really doing me head in
Back to top
 
mick-1975  
IP Logged
 
RobG
Omega Lord
*******
Offline


I might have a link, pic
or part number for that

Posts: 7968
Bristol
Gender: male

Drives: 53 plate 2.2 CD auto
Re: help car not start
Reply #34 - 31. Aug 2011 at 12:44  
Forget the crank sensor, you haven`t got a code for it and on the 2.2 a failed C/S will always throw a 0335. Put 12v direct to the pump. If it doesn`t run the pump is knackered. I`ve got a working one here if it`s donald
Back to top
 
TC Holder Maxscan GS500 OBDII code reader/EML resetter available..
 
IP Logged
 
mick-1975
Senior Member
****
Offline



Posts: 592
nottingham
Gender: male

Drives: 2.2 estate auto
Re: help car not start
Reply #35 - 31. Aug 2011 at 13:01  
do u know which wires are the earth and live as got full tank of fuel .
Back to top
 
mick-1975  
IP Logged
 
mick-1975
Senior Member
****
Offline



Posts: 592
nottingham
Gender: male

Drives: 2.2 estate auto
Re: help car not start
Reply #36 - 31. Aug 2011 at 19:03  
mick-1975 wrote on 31. Aug 2011 at 13:01:
do u know which wires are the earth and live as got full tank of fuel .


  all done after changing fuel pump not another fault . see next post
Back to top
 
mick-1975  
IP Logged
 
Pages: 1 2 3 
Send Topic Print
‹ Previous Topic | Next Topic ›

This is the old site. Please use the new site.

  « Home ‹ Board Top of this page

Omega Owners Forum » Powered by YaBB 2.5 AE!
YaBB Forum Software © 2000-2010. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge