12. Feb 2026 at 12:53

	Welcome, Guest. Please Login

Shop

Help

Members

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

Omega Owners Forum › Omega Help › Omega General Help › glove box removal help

‹ Previous Topic | Next Topic ›

Pages: 1

glove box removal help (Read 767 times)

markspark Intermediate Member Offline Posts: 449 Bolton Manchester Gender: Drives: irmscher omega 3.2 elite 2.2 Dti Saloon	glove box removal help 01. Sep 2011 at 00:25 Hi guys how do you remove the glove box on a f/l omega ive found some screws but it still wont come out it feels like its still screwed in somewhere
Back to top	IP Logged

mathewst Omega Knight Offline Posts: 1499 Split, Croatia Gender: Drives: omega 2.2i 16v	Re: glove box removal help Reply #1 - 01. Sep 2011 at 00:33 You have everything in a manual section I believe.
Back to top	IP Logged

Andy B Over Active Poster Offline Posts: 21988 Bury Lancs Gender: Drives: 1999 3.0 Elite auto/TDM	Re: glove box removal help Reply #2 - 01. Sep 2011 at 00:33 markspark wrote on 01. Sep 2011 at 00:25: Hi guys how do you remove the glove box on a f/l omega ive found some screws but it still wont come out it feels like its still screwed in somewhere late MFL have the screws shown by Mr Haynes plus an extra fastener on the A post. HTH
Back to top	IP Logged

mathewst Omega Knight Offline Posts: 1499 Split, Croatia Gender: Drives: omega 2.2i 16v	Re: glove box removal help Reply #3 - 01. Sep 2011 at 00:36 Think it is in maintenance section topic is glovebox handle replacement. I used it
Back to top	IP Logged

YZ250

Intermediate Member

Offline

Posts: 289
Thame, Oxfordshire
Gender: male

Drives: 3.2 Omega Elite Estate,bmw E92 330d M Sport (but don't tell anyone)

Re: glove box removal help
Reply #4 - 01. Sep 2011 at 07:39

When you have removed the three torx screws there are a couple of screws under the lower edge of the airbag. When the three torx screws are removed you can lift the airbag slightly
(shown in picture 5 in guide below) to gain access to these screws.Then there's the vent screws as shown in guide. Thumbs Up!

HTH

http://www.omegaowners.com/forum/YaBB.pl?num=1214169060

« Last Edit: 01. Sep 2011 at 08:39 by YZ250 »

IP Logged

markspark Intermediate Member Offline Posts: 449 Bolton Manchester Gender: Drives: irmscher omega 3.2 elite 2.2 Dti Saloon	Re: glove box removal help Reply #5 - 01. Sep 2011 at 23:04 Thanks guys
Back to top	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

This is the old site. Please use the new site.

« Home

‹ Board

Top of this page