This is the old site. Please use the new site.

  Welcome, Guest. Please Login
Omega Owners Forum
 
  Home Shop Help Search Members Login  
 

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

 
Page Index Toggle Pages: 1
Send Topic Print
Kenwood radio, standby mode when ign turned off (Read 1495 times)
Arrolman
Senior Member
****
Offline



Posts: 534
Renfrew,Scotland
Gender: male

Drives: 3.2 Special
Kenwood radio, standby mode when ign turned off
01. Sep 2011 at 22:39
 
Hi,

Got a Kenwood radio in my Omega and every time I switch the ignition off it resets to standby and I lose all the stations. I remember a while ago someone saying I had to switch around some wires to maintain a live feed? Can anyone elaborate on which ones?

Cheers,
Ian
Back to top
 

Looking to win the lottery..........
Arrolman  
IP Logged
 
Andy B
Over Active Poster
*********
Offline



Posts: 21988
Bury Lancs
Gender: male

Drives: 1999 3.0 Elite auto/TDM
Re: Kenwood radio, standby mode when ign turned off
Reply #1 - 01. Sep 2011 at 22:41
 
Arrolman wrote on 01. Sep 2011 at 22:39:
Hi,

Got a Kenwood radio in my Omega and every time I switch the ignition off it resets to standby and I lose all the stations. I remember a while ago someone saying I had to switch around some wires to maintain a live feed? Can anyone elaborate on which ones?

Cheers,
Ian



normally the red wire & yellow wire to the set both have a bullet connector in them so that you can easily swap them over.  Thumbs Up! Thumbs Up!
Back to top
 
 
IP Logged
 
Arrolman
Senior Member
****
Offline



Posts: 534
Renfrew,Scotland
Gender: male

Drives: 3.2 Special
Re: Kenwood radio, standby mode when ign turned off
Reply #2 - 01. Sep 2011 at 22:51
 
Cheers,

Will have a look tomorrow Thumbs Up!

Iain
Back to top
 

Looking to win the lottery..........
Arrolman  
IP Logged
 
Dave DND
Omega Baron
******
Offline



Posts: 3411
DND Services Ltd
Gender: male
Re: Kenwood radio, standby mode when ign turned off
Reply #3 - 02. Sep 2011 at 09:23
 
Andy B wrote on 01. Sep 2011 at 22:41:
Arrolman wrote on 01. Sep 2011 at 22:39:
Hi,

Got a Kenwood radio in my Omega and every time I switch the ignition off it resets to standby and I lose all the stations. I remember a while ago someone saying I had to switch around some wires to maintain a live feed? Can anyone elaborate on which ones?

Cheers,
Ian



normally the red wire & yellow wire to the set both have a bullet connector in them so that you can easily swap them over.  Thumbs Up! Thumbs Up!


Seconded what he said  Thumbs Up!
Back to top
 

Regards

Dave

Radio & Decoding Technician
In Car Audio Service Department

DND Services Ltd
Paignton

01803-391680

dave@dndservices.co.uk
www.dndservices.co.uk
www.instant-radio-codes.com
WWW  
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print

This is the old site. Please use the new site.