This is the old site. Please use the new site.

  Welcome, Guest. Please Login
Omega Owners Forum
 
  Home Shop Help Search Members Login  
 

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

 
Page Index Toggle Pages: 1
Send Topic Print
Omega 02 plate 2.2dti cutting out under load (Read 1052 times)
v6man54deg              Geffd
Junior Member
**
Offline


V6 man

Posts: 115
Wirral Merseyside
Gender: male

Drives: 3.0l v6 calibra
Omega 02 plate 2.2dti cutting out under load
02. Sep 2011 at 14:11
 
Just checked a friends DTI out - has a problem only when towing his caravan - engine cuts out when under load (overtaking) did it five times recently - puts it in neutral and restarts no problem - checked stored history codes and found the following

P0190 & P01590  Seam to be aimed at a mechanical fuel pump issue - any info on this would be welcome.

also i have seen on Vectra forums recently about people adding 2stroke oil to diesel - around 250 ml per tank - this idea has come from a Ford transit website - the idea is to lubricate the pump - meant to run quieter and improve mpg - not heard of this before - anyone on here tried it?
Back to top
 

V6 problems solved
 
IP Logged
 
Marks DTM Calib
Administrator
****************
Offline


Ex Member

Posts: 25671
Northern Hemisphere
Gender: male

Drives: Astra J, Mum Bus, Dexta Tractor, 108 DMU wip
Re: Omega 02 plate 2.2dti cutting out under load
Reply #1 - 02. Sep 2011 at 14:27
 
Hi Geff

I have seen this once before and it was the crankshaft sensor and it to threw some odd fuel pump codes.

As for the 2 strke oil, yes, it helps to replace some of the lubrication which is lost during the de-sulherisation process used on modern diesel. I even use it on my Z19DTH unit.

The trick is the 1 part oil to 200 parts diesle mix.

The actual research for this was carried out by Merc
Back to top
 
Marks DTM Calib  
IP Logged
 
v6man54deg              Geffd
Junior Member
**
Offline


V6 man

Posts: 115
Wirral Merseyside
Gender: male

Drives: 3.0l v6 calibra
Re: Omega 02 plate 2.2dti cutting out under load
Reply #2 - 02. Sep 2011 at 15:02
 
Hi Mark been a while mate,  he told me that a garage had recently changed his crank speed sensor so they could be old codes that they didn't clear - thanks for that mate - will see if the codes come back - the car is ok solo fault only appears when under load towing - will tell him to stick some 2 stoke oil in it.

so you got shut of the V6 then? Did you have a DTM calibra then Mark ? i have just sold my calibra v6 - which i uprated to a 3.0 ltr with a lightened flywheel - fantastic car
Back to top
 

V6 problems solved
 
IP Logged
 
VXL V6
Omega Lord
*******
Offline



Posts: 5306
Gender: male
Re: Omega 02 plate 2.2dti cutting out under load
Reply #3 - 03. Sep 2011 at 09:51
 
Hello Geoff, long time no speak.

Yeh have seen pump timing codes raised with Crank Sensor issues.

http://www.omegaowners.com/forum/YaBB.pl?num=1273011196

Dead give away for CS failure / impending failure on these is when the rev counter drops but the car still drives (albeit slowly!)
Back to top
 

Opelscanner          
SP V6 Cam Lock
VX Trade Card
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print

This is the old site. Please use the new site.