Omega Owners Forum - Cruise control don't work.

Andy89

Newbie

Offline

Posts: 1

Cruise control don't work.
04. Sep 2011 at 12:14

Hi

I bought an automatic omega, but got tired of it, so i put in a manual gearbox instead.
And after this, my cruise control stopped working, I have bought new brake switch and clutch switch but I can't find a cable to plug on the clutch switch, and the plug for the brake switch is missin 2 cables (the old one had 2 connections, but the new has 4.) have you guys ever done this?

Back to top

IP Logged

freecall666 Senior Member Offline fun for all, get with the program Posts: 656 looking over your shoulder Gender: Drives: 2.0I polar sea blue	Re: Cruise control don't work. Reply #1 - 04. Sep 2011 at 13:00 have you changed the dash., there is a board on the rev counter that lincs to the speedo, that will need to be changed., i got auto dash and the board numbers are differnt, swaped them over and worked fine. also you will need the wiring from a manual and take out the wires you have in yours even the control.
Back to top	« Last Edit: 04. Sep 2011 at 13:02 by freecall666 » doit your self (DIY) IP Logged

Lincs Robert

Omega Knight

Offline

Garage fits Omega

Posts: 1918
Lincolnshire
Gender: male

Drives: '99 Auto 3.0 Elite Saloon

Re: Cruise control don't work.
Reply #2 - 04. Sep 2011 at 13:33

Andy89 wrote on 04. Sep 2011 at 12:14:

Hi

I bought an automatic omega, but got tired of it, so i put in a manual gearbox instead.
And after this, my cruise control stopped working, I have bought new brake switch and clutch switch but I can't find a cable to plug on the clutch switch, and the plug for the brake switch is missin 2 cables (the old one had 2 connections, but the new has 4.) have you guys ever done this?

Not personally, but PM a member called SEREK who has. Am not 100% sure about the dash as I have a number of V6 dash units and (from the same model years)) the part numbers between auto and manuals are the same.

What engine and year are you trying to do?

Back to top

IP Logged

freecall666

Senior Member

Offline

fun for all, get with
the program

Posts: 656
looking over your shoulder
Gender: male

Drives: 2.0I polar sea blue

Re: Cruise control don't work.
Reply #3 - 04. Sep 2011 at 13:41

Lincs Robert wrote on 04. Sep 2011 at 13:33:

Andy89 wrote on 04. Sep 2011 at 12:14:

Hi

I bought an automatic omega, but got tired of it, so i put in a manual gearbox instead.
And after this, my cruise control stopped working, I have bought new brake switch and clutch switch but I can't find a cable to plug on the clutch switch, and the plug for the brake switch is missin 2 cables (the old one had 2 connections, but the new has 4.) have you guys ever done this?

Not personally, but PM a member called SEREK who has. Am not 100% sure about the dash as I have a number of V6 dash units and (from the same model years)) the part numbers between auto and manuals are the same.

What engine and year are you trying to do?

no its not the part number its the board number lincs the speedo and rev counter has diff board number between them and dif chip part number.

Back to top

doit your self (DIY)

IP Logged

Lincs Robert

Omega Knight

Offline

Garage fits Omega

Posts: 1918
Lincolnshire
Gender: male

Drives: '99 Auto 3.0 Elite Saloon

Re: Cruise control don't work.
Reply #4 - 04. Sep 2011 at 17:39

Ok, I've been out and looked at my collection of instrument clusters.

From 98/98 cars the units are all identical. I have compared 3 units, a 2.5 manual & auto and a 3.0 auto. The ONLY differences are the date codes. The manual one even has the bulb fitted for the auto sport mode light.

All the instrument panels worked perfectly prior to the cars being broken.

IIRC the instrument panels changed slightly when MFL was introduced - so perhaps it was the earlier cars and non-V6 ones that were different between auto and manual. Thinking about it there shouldn't need to be any difference and it makes things easier on the production lines to have as few clusters as possible.

HTH - Rob

Back to top

IP Logged

gsizoli Junior Member Offline Posts: 175 Hungary Drives: 2000 Y REG,Omega B Facelift 3L	Re: Cruise control don't work. Reply #5 - 04. Sep 2011 at 18:05 Hi, I've also upgarded to my auto to manual. Have you done the needed electrical modifications? - related to cruise control?Mine is working fine after I've installed missing component and made thesoldering. I've made according to the instructions from Maintenance section.
Back to top	IP Logged

Lincs Robert

Omega Knight

Offline

Garage fits Omega

Posts: 1918
Lincolnshire
Gender: male

Drives: '99 Auto 3.0 Elite Saloon

Re: Cruise control don't work.
Reply #6 - 04. Sep 2011 at 18:09

gsizoli wrote on 04. Sep 2011 at 18:05:

Hi, I've also upgarded to my auto to manual. Have you done the needed electrical modifications? - related to cruise control?Mine is working fine after I've installed missing component and made thesoldering.
I've made according to the instructions from Maintenance section.

Did you need to replace the instrument cluster or just modify the wiring for clutch & brake switches?

Back to top

IP Logged

freecall666

Senior Member

Offline

fun for all, get with
the program

Posts: 656
looking over your shoulder
Gender: male

Drives: 2.0I polar sea blue

Re: Cruise control don't work.
Reply #7 - 04. Sep 2011 at 18:10

Lincs Robert wrote on 04. Sep 2011 at 17:39:

Ok, I've been out and looked at my collection of instrument clusters.

From 98/98 cars the units are all identical. I have compared 3 units, a 2.5 manual & auto and a 3.0 auto. The ONLY differences are the date codes. The manual one even has the bulb fitted for the auto sport mode light.

All the instrument panels worked perfectly prior to the cars being broken.

IIRC the instrument panels changed slightly when MFL was introduced - so perhaps it was the earlier cars and non-V6 ones that were different between auto and manual. Thinking about it there shouldn't need to be any difference and it makes things easier on the production lines to have as few clusters as possible.

HTH - Rob

you might be right m8 just found the 3.0l auto board. borad number 175d94 v1, made in germany think the manual one was 174c95 v1....

Back to top

doit your self (DIY)

IP Logged

RobG

Omega Lord

Offline

I might have a link, pic
or part number for that

Posts: 7968
Bristol
Gender: male

Drives: 53 plate 2.2 CD auto

Re: Cruise control don't work.
Reply #8 - 04. Sep 2011 at 18:38

freecall666 wrote on 04. Sep 2011 at 13:00:

have you changed the dash., there is a board on the rev counter that lincs to the speedo, that will need to be changed., i got auto dash and the board numbers are differnt, swaped them over and worked fine. also you will need the wiring from a manual and take out the wires you have in yours even the control.

Rubbish

Back to top

TC Holder Maxscan GS500 OBDII code reader/EML resetter available..

IP Logged

gsizoli Junior Member Offline Posts: 175 Hungary Drives: 2000 Y REG,Omega B Facelift 3L	Re: Cruise control don't work. Reply #9 - 04. Sep 2011 at 19:28 No need to replace instrument cluster. It's a 3.0 drive by wire car. Only clutch switch was needed with the connector side, some cables, and soldering. Here is the needed wiring diagram: http://www.omegaowners.com/forum/YaBB.pl?num=1218634381
Back to top	« Last Edit: 04. Sep 2011 at 19:29 by gsizoli » IP Logged

RobG Omega Lord Offline I might have a link, pic or part number for that Posts: 7968 Bristol Gender: Drives: 53 plate 2.2 CD auto	Re: Cruise control don't work. Reply #10 - 04. Sep 2011 at 19:30 gsizoli wrote on 04. Sep 2011 at 19:28: No need to replace instrument cluster. It's a 3.0 drive by wire car. Only clutch switch was needed with the connector side, some cables, and soldering. Here is the needed wiring diagram: http://www.omegaowners.com/forum/YaBB.pl?num=1218634381 Not an Omega then
Back to top	TC Holder Maxscan GS500 OBDII code reader/EML resetter available.. IP Logged

gsizoli Junior Member Offline Posts: 175 Hungary Drives: 2000 Y REG,Omega B Facelift 3L	Re: Cruise control don't work. Reply #11 - 04. Sep 2011 at 20:11 Sorry , in this case not DBW...so the traditional old system..
Back to top	IP Logged

This is the old site. Please use the new site.

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

This is the old site. Please use the new site.

	Welcome, Guest. Please Login