04. Feb 2026 at 15:47

	Welcome, Guest. Please Login

Shop

Help

Members

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

Omega Owners Forum › Omega Help › Omega General Help › multi-ram plenum switchover valve help please

‹ Previous Topic | Next Topic ›

Pages: 1

multi-ram plenum switchover valve help please (Read 1141 times)

Squidy

Junior Member

Offline

Linux FTW

Posts: 68
Appleby-in-Westmorland
Gender: male

Drives: Omega 2.5 V6 GLS

multi-ram plenum switchover valve help please
09. Sep 2011 at 15:39

i've been studying up on the multi-ram system to see if it was worth removing in place of a direct air system, but it looks like i would actually loose power and torque if i did, but while running the engine to see how it all works i noticed that the plenum switchover valve isnt working at all!!!

My understanding is that is should be open on tickover and closed on throttle up to around 4000rpm when it opens again.

From what i can see all the vacuum pipes are connected and ive traced them around the engine bay, i do know that the plenum has been off the car before i got it but ive no idea if the vacuum pipes are correct.

1 more thing that may be connected is that i always get a punch of power when accelerating hard at about 4000rpm so i would have thought this might be a effect of the valve stuck open

« Last Edit: 09. Sep 2011 at 15:45 by Squidy »

Escort 1.3 petrol van, Escort 1.8 diesel van, Peugeot 306 1.4 petrol, Peugeot 405 1.9Dturbo, Peugeot 306 2.0HDI, Omega 2.5 v6 GLS

IP Logged

chrisgixer Omega King Offline Black ones are faster. Posts: 14570 Wokingham Gender: Drives: "Omega Black" 3.2 Elite. Thanks to Joshwyatt.	Re: multi-ram plenum switchover valve help please Reply #1 - 09. Sep 2011 at 19:11 Sounds like the front valve is not working as a step at 4k is symptomatic of exactly that. There are two m rams. Other on the rear of the plenum. Main one on bag pipes between Maf and plenum. Revving the car aggressively will make them visibly move.
Back to top	IP Logged

Squidy Junior Member Offline Linux FTW Posts: 68 Appleby-in-Westmorland Gender: Drives: Omega 2.5 V6 GLS	Re: multi-ram plenum switchover valve help please Reply #2 - 09. Sep 2011 at 20:57 the one on the inlet is working fine can see it operating at around medium revs, shouldnt the plenum one operate just after idle i thought?
Back to top	Escort 1.3 petrol van, Escort 1.8 diesel van, Peugeot 306 1.4 petrol, Peugeot 405 1.9Dturbo, Peugeot 306 2.0HDI, Omega 2.5 v6 GLS IP Logged

chrisgixer Omega King Offline Black ones are faster. Posts: 14570 Wokingham Gender: Drives: "Omega Black" 3.2 Elite. Thanks to Joshwyatt.	Re: multi-ram plenum switchover valve help please Reply #3 - 09. Sep 2011 at 21:51 Squidy wrote on 09. Sep 2011 at 20:57: the one on the inlet is working fine can see it operating at around medium revs, shouldnt the plenum one operate just after idle i thought? Nah, got a rev the Tats of it to get that one to move. Don't blink either.
Back to top	IP Logged

Osprey Senior Member Offline Drink up. The world's about to end. Posts: 513 Redhill, Surrey Gender: Drives: 2.6 Elite saloon	Re: multi-ram plenum switchover valve help please Reply #4 - 09. Sep 2011 at 22:50 Here's a nice contribution from Marks DTM Calib: http://www.omegaowners.com/forum/YaBB.pl?num=1153840176 And another snip from TB: TheBoy wrote on 25. Jul 2006 at 21:42: Tech2 can prove the valves are working - it can manually actuate them without revving the nuts off it. HTH
Back to top	I feel like a military academy. Bits of me keep passing out. IP Logged

lou

Junior Member

Offline

Always expect the unexpected

Posts: 165
Romford
Gender: male

Drives: Omega V6 2.5 cdx 1998

Re: multi-ram plenum switchover valve help please
Reply #5 - 09. Sep 2011 at 23:06

To check the rear ram is working I attached a thin wire to the plunger and fed it through one of the closes clips and left at a certain length and drove at various speeds. It will move at low revs in a higher gear 2 or 3. Drive into 3rd gear drop revs and put pedal to the metal and found that the rear ram always get activated by checking the the wire has now popped out of its clip. I could not move mine by just using the throttle.

IP Logged

Squidy Junior Member Offline Linux FTW Posts: 68 Appleby-in-Westmorland Gender: Drives: Omega 2.5 V6 GLS	Re: multi-ram plenum switchover valve help please Reply #6 - 10. Sep 2011 at 09:38 ok cheers, think ill try the wire idea, seems a simple way of checking! thanks guys!!!
Back to top	Escort 1.3 petrol van, Escort 1.8 diesel van, Peugeot 306 1.4 petrol, Peugeot 405 1.9Dturbo, Peugeot 306 2.0HDI, Omega 2.5 v6 GLS IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

This is the old site. Please use the new site.

« Home

‹ Board

Top of this page