08. Feb 2026 at 08:27

	Welcome, Guest. Please Login

Shop

Help

Members

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

Omega Owners Forum › Omega Help › Omega General Help › Aircon compressor removal

‹ Previous Topic | Next Topic ›

Pages: 1

Aircon compressor removal (Read 1014 times)

Nickbat

Omega Lord

Offline

Posts: 7167
London NW7
Gender: male

Drives: 2002 2.6CD Auto

Aircon compressor removal
28. Jul 2006 at 11:39

I come from another forum Wink

!!

My Omega is in a garage having a secondhand compressor fitted (when it arrives, that is!). The garage phoned to say that the had a right old problem taking the old one off as they had to drop the cross-member. I told them that I didn't think this was necessary as it had previously been fitted by an aircon guy at the roadside. (Sadly, he's on holiday or I would have got him to handle this replacement). They didn't believe me. I think they're after more money. Do you really need to drop the cross-member?

In case anyone is after a similar item, I have located a spares place in Brum which flogs secondhand compressors for £50. Not sure if I should post a link here as I want to be a good boy on my first visit.

I don't care to belong to a club that accepts people like me as members.
Groucho Marx

IP Logged

Matchless

Omega Knight

Offline

Posts: 1746
Nottingham
Gender: male

Drives: The one at the end of the drive

Re: Aircon compressor removal
Reply #1 - 28. Jul 2006 at 13:56

Theres no need to drop the crossmember, I changed one a couple of months ago without much trouble.

The refrigerant pipe bolt is accessible from above the engine using long socket extensions, its a sod to see but possible.
Undo the two refrigerant line unions, union nuts on early cars, QD connectors on later.
Un bolt the refrigerant pipe support bracket from sump flange, push refrigerant pipes rearwards.
Unbolt compressor, then ease it forward slightly, rotate it anticlockwise (iirc) and it will come out.

Theres just enough room to get the pipes back into the compressor and insert the bolt before tightening from above
Must use new seals on the pipe-compressor joint and new O rings in the pipe unions or QD couplers.

HTH

IP Logged

Nickbat Omega Lord Offline Posts: 7167 London NW7 Gender: Drives: 2002 2.6CD Auto	Re: Aircon compressor removal Reply #2 - 28. Jul 2006 at 15:19 Thanks, Pete. You have confirmed what I thought...
Back to top	I don't care to belong to a club that accepts people like me as members. Groucho Marx IP Logged

RonaldMcBurger Ex Member	Re: Aircon compressor removal Reply #3 - 28. Jul 2006 at 17:53 I considered changing the one on my 2.5 v6 CDX before I sold it. Afterlooking at where it was, I concluded that it was easier to leave the compressor there and remove the car, rather than the other way around.
Back to top	IP Logged

JasonH Senior Member Offline Posts: 953 Bristol Gender:	Re: Aircon compressor removal Reply #4 - 28. Jul 2006 at 19:13 TIS doesn't mention anything other than disconnecting the pipes and unbolting it. And the TIS is usually first to say step 1 remove engine.....
Back to top	IP Logged

Matchless

Omega Knight

Offline

Posts: 1746
Nottingham
Gender: male

Drives: The one at the end of the drive

Re: Aircon compressor removal
Reply #5 - 28. Jul 2006 at 23:16

Quote:

I considered changing the one on my 2.5 v6 CDX before I sold it. Afterlooking at where it was, I concluded that it was easier to leave the compressor there and remove the car, rather than the other way around.

They are orrible things to change on a car that has had leaky camcover seals so you probably did the right thing.

IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

This is the old site. Please use the new site.

« Home

‹ Board

Top of this page