This is the old site. Please use the new site.

  Welcome, Guest. Please Login
Omega Owners Forum
 
  Home Shop Help Search Members Login  
 

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

 
Page Index Toggle Pages: 1
Send Topic Print
Replacing SRS (airbag) Module FAO Jimbob (Read 6667 times)
RobG
Omega Lord
*******
Offline


I might have a link, pic
or part number for that

Posts: 7968
Bristol
Gender: male

Drives: 53 plate 2.2 CD auto
Replacing SRS (airbag) Module FAO Jimbob
14. Nov 2010 at 14:33
 
Follow instructions in this thread (courtesy of Albatross)
http://www.omegaowners.com/forum/YaBB.pl?num=1212562967
REMEMBER TO DISCONNECT BATTERY & wait for 10-15 minutes
Then you can remove the centre console in it`s entirety. When removed you will have access to this once you have removed the heater ducting (just pull towards rear then slide forward to access the nuts)
...
Undo the 4 x 10mm nuts & remove armrest bracket and you will see the module
...
Undo the 3 x 10mm nuts remove module and unclip multi-connector
...
Fit new module (same ident, in this case EF)
Re-fit everything in reverse order, job done.

If it`s suitable Jimbob please move to maintenance. Cheers.
Back to top
« Last Edit: 29. Nov 2010 at 14:06 by Jimbob »  

TC Holder Maxscan GS500 OBDII code reader/EML resetter available..
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print

This is the old site. Please use the new site.