This is the old site. Please use the new site.

01. Feb 2026 at 04:35

	Welcome, Guest. Please Login

This is the old site. Please use the new site.

www.omegaowners.com/forum/index.php.

Omega Owners Forum › Omega Help › Omega General Help › cam cover problem

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1

Send Topic

Print

cam cover problem (Read 344 times)

bert Junior Member Offline Posts: 53 Drives: omega cdx 2.5 v6 estate	cam cover problem 16. Apr 2011 at 18:12 Hi had a mate round to fit new cam cover gasket he took everything of except one nut it is a star and all the others are hex the star nut is front side of the oil filler and flush in a recess and he did not have socket to fit in the small recess as the sockets are to wide is there a socket thatwill fit ?
Back to top	IP Logged

Elite Pete Omega King Offline My spider senses are tingling Posts: 17813 Northwich/Chester Gender: Drives: Facelift Wheezel,Breaking 2001 MV6	Re: cam cover problem Reply #1 - 16. Apr 2011 at 18:18 I have a feeling it will be the recessed one under the oil filler your talking about. You have to remove the oil filler neck to get at it, if you look under the bit of chunky wiring loom you will see a little raised lip, lift that and twist the filler neck anti clock wise
Back to top	« Last Edit: 16. Apr 2011 at 18:18 by Elite Pete » V6 Cambelts, tensioners and water pump replaced £235 including parts or supply your own £100 fitted . IP Logged

bert Junior Member Offline Posts: 53 Drives: omega cdx 2.5 v6 estate	Re: cam cover problem Reply #2 - 16. Apr 2011 at 18:35 Thanks ill have a go again tomorrow
Back to top	IP Logged

Page Index Toggle

Pages: 1

Send Topic

Print

‹ Previous Topic | Next Topic ›

This is the old site. Please use the new site.

Top of this page

Omega Owners Forum » Powered by YaBB 2.5 AE!
YaBB Forum Software © 2000-2010. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge